提交 f0575e92 编写于 作者: K Keith Packard

drm/i915: DP_PIPE_ENABLED must check transcoder on CPT

Display port pipe selection on CPT is not done with a bit in the
output register, rather it is controlled by a couple of bits in the
separate transcoder register which indicate which display port output
is connected to the transcoder.

This patch replaces the simplistic macro DP_PIPE_ENABLED with the
rather more complicated function dp_pipe_enabled which checks the
output register to see if that is enabled, and then goes on to either
check the output register pipe selection bit (on non-CPT) or the
transcoder DP selection bits (on CPT).

Before this patch, any time the mode of pipe A was changed, any
display port outputs on pipe B would get disabled as
intel_disable_pch_ports would ensure that the mode setting operation
could occur on pipe A without interference from other outputs
connected to that pch port
Signed-off-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
上级 59f3e272
......@@ -2083,9 +2083,6 @@
#define DP_PIPEB_SELECT (1 << 30)
#define DP_PIPE_MASK (1 << 30)
#define DP_PIPE_ENABLED(V, P) \
(((V) & (DP_PIPE_MASK | DP_PORT_EN)) == ((P) << 30 | DP_PORT_EN))
/* Link training mode - select a suitable mode for each stage */
#define DP_LINK_TRAIN_PAT_1 (0 << 28)
#define DP_LINK_TRAIN_PAT_2 (1 << 28)
......
......@@ -979,11 +979,29 @@ static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
pipe_name(pipe));
}
static bool dp_pipe_enabled(struct drm_i915_private *dev_priv, enum pipe pipe,
int reg, u32 port_sel, u32 val)
{
if ((val & DP_PORT_EN) == 0)
return false;
if (HAS_PCH_CPT(dev_priv->dev)) {
u32 trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
u32 trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
return false;
} else {
if ((val & DP_PIPE_MASK) != (pipe << 30))
return false;
}
return true;
}
static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
enum pipe pipe, int reg, u32 port_sel)
{
u32 val = I915_READ(reg);
WARN(DP_PIPE_ENABLED(val, pipe),
WARN(dp_pipe_enabled(dev_priv, pipe, reg, port_sel, val),
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
}
......@@ -1003,9 +1021,9 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
int reg;
u32 val;
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B);
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C);
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D);
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
reg = PCH_ADPA;
val = I915_READ(reg);
......@@ -1334,19 +1352,24 @@ static void intel_disable_plane(struct drm_i915_private *dev_priv,
}
static void disable_pch_dp(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
enum pipe pipe, int reg, u32 port_sel)
{
u32 val = I915_READ(reg);
if (DP_PIPE_ENABLED(val, pipe))
if (dp_pipe_enabled(dev_priv, pipe, reg, port_sel, val)) {
DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
I915_WRITE(reg, val & ~DP_PORT_EN);
}
}
static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
if (HDMI_PIPE_ENABLED(val, pipe))
if (HDMI_PIPE_ENABLED(val, pipe)) {
DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
reg, pipe);
I915_WRITE(reg, val & ~PORT_ENABLE);
}
}
/* Disable any ports connected to this transcoder */
......@@ -1358,9 +1381,9 @@ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
val = I915_READ(PCH_PP_CONTROL);
I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS);
disable_pch_dp(dev_priv, pipe, PCH_DP_B);
disable_pch_dp(dev_priv, pipe, PCH_DP_C);
disable_pch_dp(dev_priv, pipe, PCH_DP_D);
disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
reg = PCH_ADPA;
val = I915_READ(reg);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册