提交 ef5127a4 编写于 作者: R Rafał Miłecki 提交者: John W. Linville

b43: N-PHY: add workarounds for gain control

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 28fd7daa
......@@ -712,6 +712,134 @@ static void b43_nphy_stop_playback(struct b43_wldev *dev)
b43_nphy_stay_in_carrier_search(dev, 0);
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/WorkaroundsGainCtrl */
static void b43_nphy_gain_crtl_workarounds(struct b43_wldev *dev)
{
struct b43_phy_n *nphy = dev->phy.n;
u8 i, j;
u8 code;
/* TODO: for PHY >= 3
s8 *lna1_gain, *lna2_gain;
u8 *gain_db, *gain_bits;
u16 *rfseq_init;
u8 lpf_gain[6] = { 0x00, 0x06, 0x0C, 0x12, 0x12, 0x12 };
u8 lpf_bits[6] = { 0, 1, 2, 3, 3, 3 };
*/
u8 rfseq_events[3] = { 6, 8, 7 };
u8 rfseq_delays[3] = { 10, 30, 1 };
if (dev->phy.rev >= 3) {
/* TODO */
} else {
/* Set Clip 2 detect */
b43_phy_set(dev, B43_NPHY_C1_CGAINI,
B43_NPHY_C1_CGAINI_CL2DETECT);
b43_phy_set(dev, B43_NPHY_C2_CGAINI,
B43_NPHY_C2_CGAINI_CL2DETECT);
/* Set narrowband clip threshold */
b43_phy_set(dev, B43_NPHY_C1_NBCLIPTHRES, 0x84);
b43_phy_set(dev, B43_NPHY_C2_NBCLIPTHRES, 0x84);
if (!dev->phy.is_40mhz) {
/* Set dwell lengths */
b43_phy_set(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 0x002B);
b43_phy_set(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 0x002B);
b43_phy_set(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 0x0009);
b43_phy_set(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 0x0009);
}
/* Set wideband clip 2 threshold */
b43_phy_maskset(dev, B43_NPHY_C1_CLIPWBTHRES,
~B43_NPHY_C1_CLIPWBTHRES_CLIP2,
21);
b43_phy_maskset(dev, B43_NPHY_C2_CLIPWBTHRES,
~B43_NPHY_C2_CLIPWBTHRES_CLIP2,
21);
if (!dev->phy.is_40mhz) {
b43_phy_maskset(dev, B43_NPHY_C1_CGAINI,
~B43_NPHY_C1_CGAINI_GAINBKOFF, 0x1);
b43_phy_maskset(dev, B43_NPHY_C2_CGAINI,
~B43_NPHY_C2_CGAINI_GAINBKOFF, 0x1);
b43_phy_maskset(dev, B43_NPHY_C1_CCK_CGAINI,
~B43_NPHY_C1_CCK_CGAINI_GAINBKOFF, 0x1);
b43_phy_maskset(dev, B43_NPHY_C2_CCK_CGAINI,
~B43_NPHY_C2_CCK_CGAINI_GAINBKOFF, 0x1);
}
b43_phy_set(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
if (nphy->gain_boost) {
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ &&
dev->phy.is_40mhz)
code = 4;
else
code = 5;
} else {
code = dev->phy.is_40mhz ? 6 : 7;
}
/* Set HPVGA2 index */
b43_phy_maskset(dev, B43_NPHY_C1_INITGAIN,
~B43_NPHY_C1_INITGAIN_HPVGA2,
code << B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT);
b43_phy_maskset(dev, B43_NPHY_C2_INITGAIN,
~B43_NPHY_C2_INITGAIN_HPVGA2,
code << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT);
b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
(code << 8 | 0x7C));
b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
(code << 8 | 0x7C));
/* TODO: b43_nphy_adjust_lna_gain_table(dev); */
if (nphy->elna_gain_config) {
b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0808);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x0C08);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
(code << 8 | 0x74));
b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
(code << 8 | 0x74));
}
if (dev->phy.rev == 2) {
for (i = 0; i < 4; i++) {
b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
(0x0400 * i) + 0x0020);
for (j = 0; j < 21; j++)
b43_phy_write(dev,
B43_NPHY_TABLE_DATALO, 3 * j);
}
/* TODO: b43_nphy_set_rf_sequence(dev, 5,
rfseq_events, rfseq_delays, 3);*/
b43_phy_maskset(dev, B43_NPHY_OVER_DGAIN1,
(u16)~B43_NPHY_OVER_DGAIN_CCKDGECV,
0x5A << B43_NPHY_OVER_DGAIN_CCKDGECV_SHIFT);
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
b43_phy_maskset(dev, B43_PHY_N(0xC5D),
0xFF80, 4);
}
}
}
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Workarounds */
static void b43_nphy_workarounds(struct b43_wldev *dev)
{
......@@ -786,7 +914,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
/*TODO:b43_nphy_set_rf_sequence(dev, 0, events1, delays1, 7);*/
/*TODO:b43_nphy_set_rf_sequence(dev, 1, events2, delays2, 7);*/
/*TODO:b43_nphy_gain_crtl_workarounds(dev);*/
b43_nphy_gain_crtl_workarounds(dev);
if (dev->phy.rev < 2) {
if (b43_phy_read(dev, B43_NPHY_RXCTL) & 0x2)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册