提交 edb5a98e 编写于 作者: B Ben Dooks 提交者: Pierre Ossman

MMC: S3C24XX: Add platform data for MMC/SD driver

This patch adds platform data support to the s3mci driver.  This allows
flexible board-specific configuration of set_power, card detect and read only
pins.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
上级 d643b5f7
......@@ -21,6 +21,8 @@
#include <asm/arch/regs-sdi.h>
#include <asm/arch/regs-gpio.h>
#include <asm/plat-s3c24xx/mci.h>
#include "s3cmci.h"
#define DRIVER_NAME "s3c-mci"
......@@ -1011,6 +1013,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2);
s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3);
if (host->pdata->set_power)
host->pdata->set_power(ios->power_mode, ios->vdd);
if (!host->is2440)
mci_con |= S3C2410_SDICON_FIFORESET;
......@@ -1024,6 +1029,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
if (host->pdata->set_power)
host->pdata->set_power(ios->power_mode, ios->vdd);
break;
}
......@@ -1072,9 +1080,25 @@ static void s3cmci_reset(struct s3cmci_host *host)
writel(con, host->base + S3C2410_SDICON);
}
static int s3cmci_get_ro(struct mmc_host *mmc)
{
struct s3cmci_host *host = mmc_priv(mmc);
if (host->pdata->gpio_wprotect == 0)
return 0;
return s3c2410_gpio_getpin(host->pdata->gpio_wprotect);
}
static struct mmc_host_ops s3cmci_ops = {
.request = s3cmci_request,
.set_ios = s3cmci_set_ios,
.get_ro = s3cmci_get_ro,
};
static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
/* This is currently here to avoid a number of if (host->pdata)
* checks. Any zero fields to ensure reaonable defaults are picked. */
};
static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
......@@ -1094,6 +1118,12 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
host->pdev = pdev;
host->is2440 = is2440;
host->pdata = pdev->dev.platform_data;
if (!host->pdata) {
pdev->dev.platform_data = &s3cmci_def_pdata;
host->pdata = &s3cmci_def_pdata;
}
spin_lock_init(&host->complete_lock);
tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
......@@ -1112,7 +1142,8 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
host->pio_active = XFER_NONE;
host->dma = S3CMCI_DMA;
host->irq_cd = IRQ_EINT2;
host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ);
host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!host->mem) {
......@@ -1158,7 +1189,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
disable_irq(host->irq);
s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_EINT2);
s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ);
set_irq_type(host->irq_cd, IRQT_BOTHEDGE);
if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) {
......@@ -1168,6 +1199,10 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
goto probe_free_irq;
}
if (host->pdata->gpio_wprotect)
s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect,
S3C2410_GPIO_INPUT);
if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) {
dev_err(&pdev->dev, "unable to get DMA channel.\n");
ret = -EBUSY;
......@@ -1191,11 +1226,14 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
host->clk_rate = clk_get_rate(host->clk);
mmc->ops = &s3cmci_ops;
mmc->ocr_avail = MMC_VDD_32_33;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = MMC_CAP_4_BIT_DATA;
mmc->f_min = host->clk_rate / (host->clk_div * 256);
mmc->f_max = host->clk_rate / host->clk_div;
if (host->pdata->ocr_avail)
mmc->ocr_avail = host->pdata->ocr_avail;
mmc->max_blk_count = 4095;
mmc->max_blk_size = 4095;
mmc->max_req_size = 4095 * 512;
......
......@@ -22,6 +22,7 @@ enum s3cmci_waitfor {
struct s3cmci_host {
struct platform_device *pdev;
struct s3c24xx_mci_pdata *pdata;
struct mmc_host *mmc;
struct resource *mem;
struct clk *clk;
......
#ifndef _ARCH_MCI_H
#define _ARCH_MCI_H
struct s3c24xx_mci_pdata {
unsigned int gpio_detect;
unsigned int gpio_wprotect;
unsigned long ocr_avail;
void (*set_power)(unsigned char power_mode,
unsigned short vdd);
};
#endif /* _ARCH_NCI_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册