提交 e6b4573c 编写于 作者: I Imre Deak 提交者: Linus Torvalds

OMAP: add TI OMAP1 external LCD controller support - SoSSI

- Adds support for Texas Instruments OMAP1 processors boards connected with
  external LCD controller through "Special OptimiSed Screen Interface"
Signed-off-by: NTrilok Soni <soni.trilok@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 7a055fc2
......@@ -36,3 +36,10 @@ config FB_OMAP_DMA_TUNE
answer yes. Answer no if you have a dedicated video
memory, or don't use any of the accelerated features.
config FB_OMAP_LCDC_EXTERNAL
bool "External LCD controller support"
depends on FB_OMAP
help
Say Y here, if you want to have support for boards with an
external LCD controller connected to the SoSSI/RFBI interface.
......@@ -9,5 +9,7 @@ objs-yy := omapfb_main.o
objs-y$(CONFIG_ARCH_OMAP1) += lcdc.o
objs-y$(CONFIG_ARCH_OMAP2) += dispc.o
objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
omapfb-objs := $(objs-yy)
/*
* OMAP1 Special OptimiSed Screen Interface support
*
* Copyright (C) 2004-2005 Nokia Corporation
* Author: Juha Yrjl <juha.yrjola@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/arch/dma.h>
#include <asm/arch/omapfb.h>
#include "lcdc.h"
#define MODULE_NAME "omapfb-sossi"
#define OMAP_SOSSI_BASE 0xfffbac00
#define SOSSI_ID_REG 0x00
#define SOSSI_INIT1_REG 0x04
#define SOSSI_INIT2_REG 0x08
#define SOSSI_INIT3_REG 0x0c
#define SOSSI_FIFO_REG 0x10
#define SOSSI_REOTABLE_REG 0x14
#define SOSSI_TEARING_REG 0x18
#define SOSSI_INIT1B_REG 0x1c
#define SOSSI_FIFOB_REG 0x20
#define DMA_GSCR 0xfffedc04
#define DMA_LCD_CCR 0xfffee3c2
#define DMA_LCD_CTRL 0xfffee3c4
#define DMA_LCD_LCH_CTRL 0xfffee3ea
#define CONF_SOSSI_RESET_R (1 << 23)
#define RD_ACCESS 0
#define WR_ACCESS 1
#define SOSSI_MAX_XMIT_BYTES (512 * 1024)
static struct {
void __iomem *base;
struct clk *fck;
unsigned long fck_hz;
spinlock_t lock;
int bus_pick_count;
int bus_pick_width;
int tearsync_mode;
int tearsync_line;
void (*lcdc_callback)(void *data);
void *lcdc_callback_data;
int vsync_dma_pending;
/* timing for read and write access */
int clk_div;
u8 clk_tw0[2];
u8 clk_tw1[2];
/*
* if last_access is the same as current we don't have to change
* the timings
*/
int last_access;
struct omapfb_device *fbdev;
} sossi;
static inline u32 sossi_read_reg(int reg)
{
return readl(sossi.base + reg);
}
static inline u16 sossi_read_reg16(int reg)
{
return readw(sossi.base + reg);
}
static inline u8 sossi_read_reg8(int reg)
{
return readb(sossi.base + reg);
}
static inline void sossi_write_reg(int reg, u32 value)
{
writel(value, sossi.base + reg);
}
static inline void sossi_write_reg16(int reg, u16 value)
{
writew(value, sossi.base + reg);
}
static inline void sossi_write_reg8(int reg, u8 value)
{
writeb(value, sossi.base + reg);
}
static void sossi_set_bits(int reg, u32 bits)
{
sossi_write_reg(reg, sossi_read_reg(reg) | bits);
}
static void sossi_clear_bits(int reg, u32 bits)
{
sossi_write_reg(reg, sossi_read_reg(reg) & ~bits);
}
#define HZ_TO_PS(x) (1000000000 / (x / 1000))
static u32 ps_to_sossi_ticks(u32 ps, int div)
{
u32 clk_period = HZ_TO_PS(sossi.fck_hz) * div;
return (clk_period + ps - 1) / clk_period;
}
static int calc_rd_timings(struct extif_timings *t)
{
u32 tw0, tw1;
int reon, reoff, recyc, actim;
int div = t->clk_div;
/*
* Make sure that after conversion it still holds that:
* reoff > reon, recyc >= reoff, actim > reon
*/
reon = ps_to_sossi_ticks(t->re_on_time, div);
/* reon will be exactly one sossi tick */
if (reon > 1)
return -1;
reoff = ps_to_sossi_ticks(t->re_off_time, div);
if (reoff <= reon)
reoff = reon + 1;
tw0 = reoff - reon;
if (tw0 > 0x10)
return -1;
recyc = ps_to_sossi_ticks(t->re_cycle_time, div);
if (recyc <= reoff)
recyc = reoff + 1;
tw1 = recyc - tw0;
/* values less then 3 result in the SOSSI block resetting itself */
if (tw1 < 3)
tw1 = 3;
if (tw1 > 0x40)
return -1;
actim = ps_to_sossi_ticks(t->access_time, div);
if (actim < reoff)
actim++;
/*
* access time (data hold time) will be exactly one sossi
* tick
*/
if (actim - reoff > 1)
return -1;
t->tim[0] = tw0 - 1;
t->tim[1] = tw1 - 1;
return 0;
}
static int calc_wr_timings(struct extif_timings *t)
{
u32 tw0, tw1;
int weon, weoff, wecyc;
int div = t->clk_div;
/*
* Make sure that after conversion it still holds that:
* weoff > weon, wecyc >= weoff
*/
weon = ps_to_sossi_ticks(t->we_on_time, div);
/* weon will be exactly one sossi tick */
if (weon > 1)
return -1;
weoff = ps_to_sossi_ticks(t->we_off_time, div);
if (weoff <= weon)
weoff = weon + 1;
tw0 = weoff - weon;
if (tw0 > 0x10)
return -1;
wecyc = ps_to_sossi_ticks(t->we_cycle_time, div);
if (wecyc <= weoff)
wecyc = weoff + 1;
tw1 = wecyc - tw0;
/* values less then 3 result in the SOSSI block resetting itself */
if (tw1 < 3)
tw1 = 3;
if (tw1 > 0x40)
return -1;
t->tim[2] = tw0 - 1;
t->tim[3] = tw1 - 1;
return 0;
}
static void _set_timing(int div, int tw0, int tw1)
{
u32 l;
#ifdef VERBOSE
dev_dbg(sossi.fbdev->dev, "Using TW0 = %d, TW1 = %d, div = %d\n",
tw0 + 1, tw1 + 1, div);
#endif
clk_set_rate(sossi.fck, sossi.fck_hz / div);
clk_enable(sossi.fck);
l = sossi_read_reg(SOSSI_INIT1_REG);
l &= ~((0x0f << 20) | (0x3f << 24));
l |= (tw0 << 20) | (tw1 << 24);
sossi_write_reg(SOSSI_INIT1_REG, l);
clk_disable(sossi.fck);
}
static void _set_bits_per_cycle(int bus_pick_count, int bus_pick_width)
{
u32 l;
l = sossi_read_reg(SOSSI_INIT3_REG);
l &= ~0x3ff;
l |= ((bus_pick_count - 1) << 5) | ((bus_pick_width - 1) & 0x1f);
sossi_write_reg(SOSSI_INIT3_REG, l);
}
static void _set_tearsync_mode(int mode, unsigned line)
{
u32 l;
l = sossi_read_reg(SOSSI_TEARING_REG);
l &= ~(((1 << 11) - 1) << 15);
l |= line << 15;
l &= ~(0x3 << 26);
l |= mode << 26;
sossi_write_reg(SOSSI_TEARING_REG, l);
if (mode)
sossi_set_bits(SOSSI_INIT2_REG, 1 << 6); /* TE logic */
else
sossi_clear_bits(SOSSI_INIT2_REG, 1 << 6);
}
static inline void set_timing(int access)
{
if (access != sossi.last_access) {
sossi.last_access = access;
_set_timing(sossi.clk_div,
sossi.clk_tw0[access], sossi.clk_tw1[access]);
}
}
static void sossi_start_transfer(void)
{
/* WE */
sossi_clear_bits(SOSSI_INIT2_REG, 1 << 4);
/* CS active low */
sossi_clear_bits(SOSSI_INIT1_REG, 1 << 30);
}
static void sossi_stop_transfer(void)
{
/* WE */
sossi_set_bits(SOSSI_INIT2_REG, 1 << 4);
/* CS active low */
sossi_set_bits(SOSSI_INIT1_REG, 1 << 30);
}
static void wait_end_of_write(void)
{
/* Before reading we must check if some writings are going on */
while (!(sossi_read_reg(SOSSI_INIT2_REG) & (1 << 3)));
}
static void send_data(const void *data, unsigned int len)
{
while (len >= 4) {
sossi_write_reg(SOSSI_FIFO_REG, *(const u32 *) data);
len -= 4;
data += 4;
}
while (len >= 2) {
sossi_write_reg16(SOSSI_FIFO_REG, *(const u16 *) data);
len -= 2;
data += 2;
}
while (len) {
sossi_write_reg8(SOSSI_FIFO_REG, *(const u8 *) data);
len--;
data++;
}
}
static void set_cycles(unsigned int len)
{
unsigned long nr_cycles = len / (sossi.bus_pick_width / 8);
BUG_ON((nr_cycles - 1) & ~0x3ffff);
sossi_clear_bits(SOSSI_INIT1_REG, 0x3ffff);
sossi_set_bits(SOSSI_INIT1_REG, (nr_cycles - 1) & 0x3ffff);
}
static int sossi_convert_timings(struct extif_timings *t)
{
int r = 0;
int div = t->clk_div;
t->converted = 0;
if (div <= 0 || div > 8)
return -1;
/* no CS on SOSSI, so ignore cson, csoff, cs_pulsewidth */
if ((r = calc_rd_timings(t)) < 0)
return r;
if ((r = calc_wr_timings(t)) < 0)
return r;
t->tim[4] = div;
t->converted = 1;
return 0;
}
static void sossi_set_timings(const struct extif_timings *t)
{
BUG_ON(!t->converted);
sossi.clk_tw0[RD_ACCESS] = t->tim[0];
sossi.clk_tw1[RD_ACCESS] = t->tim[1];
sossi.clk_tw0[WR_ACCESS] = t->tim[2];
sossi.clk_tw1[WR_ACCESS] = t->tim[3];
sossi.clk_div = t->tim[4];
}
static void sossi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
{
*clk_period = HZ_TO_PS(sossi.fck_hz);
*max_clk_div = 8;
}
static void sossi_set_bits_per_cycle(int bpc)
{
int bus_pick_count, bus_pick_width;
/*
* We set explicitly the the bus_pick_count as well, although
* with remapping/reordering disabled it will be calculated by HW
* as (32 / bus_pick_width).
*/
switch (bpc) {
case 8:
bus_pick_count = 4;
bus_pick_width = 8;
break;
case 16:
bus_pick_count = 2;
bus_pick_width = 16;
break;
default:
BUG();
return;
}
sossi.bus_pick_width = bus_pick_width;
sossi.bus_pick_count = bus_pick_count;
}
static int sossi_setup_tearsync(unsigned pin_cnt,
unsigned hs_pulse_time, unsigned vs_pulse_time,
int hs_pol_inv, int vs_pol_inv, int div)
{
int hs, vs;
u32 l;
if (pin_cnt != 1 || div < 1 || div > 8)
return -EINVAL;
hs = ps_to_sossi_ticks(hs_pulse_time, div);
vs = ps_to_sossi_ticks(vs_pulse_time, div);
if (vs < 8 || vs <= hs || vs >= (1 << 12))
return -EDOM;
vs /= 8;
vs--;
if (hs > 8)
hs = 8;
if (hs)
hs--;
dev_dbg(sossi.fbdev->dev,
"setup_tearsync: hs %d vs %d hs_inv %d vs_inv %d\n",
hs, vs, hs_pol_inv, vs_pol_inv);
clk_enable(sossi.fck);
l = sossi_read_reg(SOSSI_TEARING_REG);
l &= ~((1 << 15) - 1);
l |= vs << 3;
l |= hs;
if (hs_pol_inv)
l |= 1 << 29;
else
l &= ~(1 << 29);
if (vs_pol_inv)
l |= 1 << 28;
else
l &= ~(1 << 28);
sossi_write_reg(SOSSI_TEARING_REG, l);
clk_disable(sossi.fck);
return 0;
}
static int sossi_enable_tearsync(int enable, unsigned line)
{
int mode;
dev_dbg(sossi.fbdev->dev, "tearsync %d line %d\n", enable, line);
if (line >= 1 << 11)
return -EINVAL;
if (enable) {
if (line)
mode = 2; /* HS or VS */
else
mode = 3; /* VS only */
} else
mode = 0;
sossi.tearsync_line = line;
sossi.tearsync_mode = mode;
return 0;
}
static void sossi_write_command(const void *data, unsigned int len)
{
clk_enable(sossi.fck);
set_timing(WR_ACCESS);
_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
/* CMD#/DATA */
sossi_clear_bits(SOSSI_INIT1_REG, 1 << 18);
set_cycles(len);
sossi_start_transfer();
send_data(data, len);
sossi_stop_transfer();
wait_end_of_write();
clk_disable(sossi.fck);
}
static void sossi_write_data(const void *data, unsigned int len)
{
clk_enable(sossi.fck);
set_timing(WR_ACCESS);
_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
/* CMD#/DATA */
sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
set_cycles(len);
sossi_start_transfer();
send_data(data, len);
sossi_stop_transfer();
wait_end_of_write();
clk_disable(sossi.fck);
}
static void sossi_transfer_area(int width, int height,
void (callback)(void *data), void *data)
{
BUG_ON(callback == NULL);
sossi.lcdc_callback = callback;
sossi.lcdc_callback_data = data;
clk_enable(sossi.fck);
set_timing(WR_ACCESS);
_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
_set_tearsync_mode(sossi.tearsync_mode, sossi.tearsync_line);
/* CMD#/DATA */
sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
set_cycles(width * height * sossi.bus_pick_width / 8);
sossi_start_transfer();
if (sossi.tearsync_mode) {
/*
* Wait for the sync signal and start the transfer only
* then. We can't seem to be able to use HW sync DMA for
* this since LCD DMA shows huge latencies, as if it
* would ignore some of the DMA requests from SoSSI.
*/
unsigned long flags;
spin_lock_irqsave(&sossi.lock, flags);
sossi.vsync_dma_pending++;
spin_unlock_irqrestore(&sossi.lock, flags);
} else
/* Just start the transfer right away. */
omap_enable_lcd_dma();
}
static void sossi_dma_callback(void *data)
{
omap_stop_lcd_dma();
sossi_stop_transfer();
clk_disable(sossi.fck);
sossi.lcdc_callback(sossi.lcdc_callback_data);
}
static void sossi_read_data(void *data, unsigned int len)
{
clk_enable(sossi.fck);
set_timing(RD_ACCESS);
_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
/* CMD#/DATA */
sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
set_cycles(len);
sossi_start_transfer();
while (len >= 4) {
*(u32 *) data = sossi_read_reg(SOSSI_FIFO_REG);
len -= 4;
data += 4;
}
while (len >= 2) {
*(u16 *) data = sossi_read_reg16(SOSSI_FIFO_REG);
len -= 2;
data += 2;
}
while (len) {
*(u8 *) data = sossi_read_reg8(SOSSI_FIFO_REG);
len--;
data++;
}
sossi_stop_transfer();
clk_disable(sossi.fck);
}
static irqreturn_t sossi_match_irq(int irq, void *data)
{
unsigned long flags;
spin_lock_irqsave(&sossi.lock, flags);
if (sossi.vsync_dma_pending) {
sossi.vsync_dma_pending--;
omap_enable_lcd_dma();
}
spin_unlock_irqrestore(&sossi.lock, flags);
return IRQ_HANDLED;
}
static int sossi_init(struct omapfb_device *fbdev)
{
u32 l, k;
struct clk *fck;
struct clk *dpll1out_ck;
int r;
sossi.base = (void __iomem *)IO_ADDRESS(OMAP_SOSSI_BASE);
sossi.fbdev = fbdev;
spin_lock_init(&sossi.lock);
dpll1out_ck = clk_get(fbdev->dev, "ck_dpll1out");
if (IS_ERR(dpll1out_ck)) {
dev_err(fbdev->dev, "can't get DPLL1OUT clock\n");
return PTR_ERR(dpll1out_ck);
}
/*
* We need the parent clock rate, which we might divide further
* depending on the timing requirements of the controller. See
* _set_timings.
*/
sossi.fck_hz = clk_get_rate(dpll1out_ck);
clk_put(dpll1out_ck);
fck = clk_get(fbdev->dev, "ck_sossi");
if (IS_ERR(fck)) {
dev_err(fbdev->dev, "can't get SoSSI functional clock\n");
return PTR_ERR(fck);
}
sossi.fck = fck;
/* Reset and enable the SoSSI module */
l = omap_readl(MOD_CONF_CTRL_1);
l |= CONF_SOSSI_RESET_R;
omap_writel(l, MOD_CONF_CTRL_1);
l &= ~CONF_SOSSI_RESET_R;
omap_writel(l, MOD_CONF_CTRL_1);
clk_enable(sossi.fck);
l = omap_readl(ARM_IDLECT2);
l &= ~(1 << 8); /* DMACK_REQ */
omap_writel(l, ARM_IDLECT2);
l = sossi_read_reg(SOSSI_INIT2_REG);
/* Enable and reset the SoSSI block */
l |= (1 << 0) | (1 << 1);
sossi_write_reg(SOSSI_INIT2_REG, l);
/* Take SoSSI out of reset */
l &= ~(1 << 1);
sossi_write_reg(SOSSI_INIT2_REG, l);
sossi_write_reg(SOSSI_ID_REG, 0);
l = sossi_read_reg(SOSSI_ID_REG);
k = sossi_read_reg(SOSSI_ID_REG);
if (l != 0x55555555 || k != 0xaaaaaaaa) {
dev_err(fbdev->dev,
"invalid SoSSI sync pattern: %08x, %08x\n", l, k);
r = -ENODEV;
goto err;
}
if ((r = omap_lcdc_set_dma_callback(sossi_dma_callback, NULL)) < 0) {
dev_err(fbdev->dev, "can't get LCDC IRQ\n");
r = -ENODEV;
goto err;
}
l = sossi_read_reg(SOSSI_ID_REG); /* Component code */
l = sossi_read_reg(SOSSI_ID_REG);
dev_info(fbdev->dev, "SoSSI version %d.%d initialized\n",
l >> 16, l & 0xffff);
l = sossi_read_reg(SOSSI_INIT1_REG);
l |= (1 << 19); /* DMA_MODE */
l &= ~(1 << 31); /* REORDERING */
sossi_write_reg(SOSSI_INIT1_REG, l);
if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
IRQT_FALLING,
"sossi_match", sossi.fbdev->dev)) < 0) {
dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
goto err;
}
clk_disable(sossi.fck);
return 0;
err:
clk_disable(sossi.fck);
clk_put(sossi.fck);
return r;
}
static void sossi_cleanup(void)
{
omap_lcdc_free_dma_callback();
clk_put(sossi.fck);
}
struct lcd_ctrl_extif omap1_ext_if = {
.init = sossi_init,
.cleanup = sossi_cleanup,
.get_clk_info = sossi_get_clk_info,
.convert_timings = sossi_convert_timings,
.set_timings = sossi_set_timings,
.set_bits_per_cycle = sossi_set_bits_per_cycle,
.setup_tearsync = sossi_setup_tearsync,
.enable_tearsync = sossi_enable_tearsync,
.write_command = sossi_write_command,
.read_data = sossi_read_data,
.write_data = sossi_write_data,
.transfer_area = sossi_transfer_area,
.max_transmit_size = SOSSI_MAX_XMIT_BYTES,
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册