提交 e259a3ae 编写于 作者: R Russell King 提交者: Russell King

[ARM] pxa: convert PXA serial drivers to use platform resources

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 08197f6e
......@@ -267,21 +267,80 @@ void __init set_pxa_fb_parent(struct device *parent_dev)
pxa_device_fb.dev.parent = parent_dev;
}
static struct resource pxa_resource_ffuart[] = {
{
.start = __PREG(FFUART),
.end = __PREG(FFUART) + 35,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_FFUART,
.end = IRQ_FFUART,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device pxa_device_ffuart= {
.name = "pxa2xx-uart",
.id = 0,
.resource = pxa_resource_ffuart,
.num_resources = ARRAY_SIZE(pxa_resource_ffuart),
};
static struct resource pxa_resource_btuart[] = {
{
.start = __PREG(BTUART),
.end = __PREG(BTUART) + 35,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_BTUART,
.end = IRQ_BTUART,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device pxa_device_btuart = {
.name = "pxa2xx-uart",
.id = 1,
.resource = pxa_resource_btuart,
.num_resources = ARRAY_SIZE(pxa_resource_btuart),
};
static struct resource pxa_resource_stuart[] = {
{
.start = __PREG(STUART),
.end = __PREG(STUART) + 35,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_STUART,
.end = IRQ_STUART,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device pxa_device_stuart = {
.name = "pxa2xx-uart",
.id = 2,
.resource = pxa_resource_stuart,
.num_resources = ARRAY_SIZE(pxa_resource_stuart),
};
static struct resource pxa_resource_hwuart[] = {
{
.start = __PREG(HWUART),
.end = __PREG(HWUART) + 47,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_HWUART,
.end = IRQ_HWUART,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device pxa_device_hwuart = {
.name = "pxa2xx-uart",
.id = 3,
.resource = pxa_resource_hwuart,
.num_resources = ARRAY_SIZE(pxa_resource_hwuart),
};
static struct resource pxai2c_resources[] = {
......
......@@ -582,7 +582,7 @@ serial_pxa_type(struct uart_port *port)
#ifdef CONFIG_SERIAL_PXA_CONSOLE
static struct uart_pxa_port serial_pxa_ports[];
static struct uart_pxa_port *serial_pxa_ports[4];
static struct uart_driver serial_pxa_reg;
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
......@@ -632,7 +632,7 @@ static void serial_pxa_console_putchar(struct uart_port *port, int ch)
static void
serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_pxa_port *up = &serial_pxa_ports[co->index];
struct uart_pxa_port *up = serial_pxa_ports[co->index];
unsigned int ier;
/*
......@@ -662,7 +662,9 @@ serial_pxa_console_setup(struct console *co, char *options)
if (co->index == -1 || co->index >= serial_pxa_reg.nr)
co->index = 0;
up = &serial_pxa_ports[co->index];
up = serial_pxa_ports[co->index];
if (!up)
return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
......@@ -680,15 +682,6 @@ static struct console serial_pxa_console = {
.data = &serial_pxa_reg,
};
static int __init
serial_pxa_console_init(void)
{
register_console(&serial_pxa_console);
return 0;
}
console_initcall(serial_pxa_console_init);
#define PXA_CONSOLE &serial_pxa_console
#else
#define PXA_CONSOLE NULL
......@@ -714,73 +707,13 @@ struct uart_ops serial_pxa_pops = {
.verify_port = serial_pxa_verify_port,
};
static struct uart_pxa_port serial_pxa_ports[] = {
{ /* FFUART */
.name = "FFUART",
.cken = CKEN_FFUART,
.port = {
.type = PORT_PXA,
.iotype = UPIO_MEM,
.membase = (void *)&FFUART,
.mapbase = __PREG(FFUART),
.irq = IRQ_FFUART,
.uartclk = 921600 * 16,
.fifosize = 64,
.ops = &serial_pxa_pops,
.line = 0,
},
}, { /* BTUART */
.name = "BTUART",
.cken = CKEN_BTUART,
.port = {
.type = PORT_PXA,
.iotype = UPIO_MEM,
.membase = (void *)&BTUART,
.mapbase = __PREG(BTUART),
.irq = IRQ_BTUART,
.uartclk = 921600 * 16,
.fifosize = 64,
.ops = &serial_pxa_pops,
.line = 1,
},
}, { /* STUART */
.name = "STUART",
.cken = CKEN_STUART,
.port = {
.type = PORT_PXA,
.iotype = UPIO_MEM,
.membase = (void *)&STUART,
.mapbase = __PREG(STUART),
.irq = IRQ_STUART,
.uartclk = 921600 * 16,
.fifosize = 64,
.ops = &serial_pxa_pops,
.line = 2,
},
}, { /* HWUART */
.name = "HWUART",
.cken = CKEN_HWUART,
.port = {
.type = PORT_PXA,
.iotype = UPIO_MEM,
.membase = (void *)&HWUART,
.mapbase = __PREG(HWUART),
.irq = IRQ_HWUART,
.uartclk = 921600 * 16,
.fifosize = 64,
.ops = &serial_pxa_pops,
.line = 3,
},
}
};
static struct uart_driver serial_pxa_reg = {
.owner = THIS_MODULE,
.driver_name = "PXA serial",
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
.nr = ARRAY_SIZE(serial_pxa_ports),
.nr = 4,
.cons = PXA_CONSOLE,
};
......@@ -806,10 +739,60 @@ static int serial_pxa_resume(struct platform_device *dev)
static int serial_pxa_probe(struct platform_device *dev)
{
serial_pxa_ports[dev->id].port.dev = &dev->dev;
uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
platform_set_drvdata(dev, &serial_pxa_ports[dev->id]);
struct uart_pxa_port *sport;
struct resource *mmres, *irqres;
int ret;
mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
if (!mmres || !irqres)
return -ENODEV;
sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
if (!sport)
return -ENOMEM;
sport->port.type = PORT_PXA;
sport->port.iotype = UPIO_MEM;
sport->port.mapbase = mmres->start;
sport->port.irq = irqres->start;
sport->port.fifosize = 64;
sport->port.ops = &serial_pxa_pops;
sport->port.line = dev->id;
sport->port.dev = &dev->dev;
sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
sport->port.uartclk = 921600 * 16;
/*
* Is it worth keeping this?
*/
if (mmres->start == __PREG(FFUART))
sport->name = "FFUART";
else if (mmres->start == __PREG(BTUART))
sport->name = "BTUART";
else if (mmres->start == __PREG(STUART))
sport->name = "STUART";
else if (mmres->start == __PREG(HWUART))
sport->name = "HWUART";
else
sport->name = "???";
sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
if (!sport->port.membase) {
ret = -ENOMEM;
goto err_free;
}
serial_pxa_ports[dev->id] = sport;
uart_add_one_port(&serial_pxa_reg, &sport->port);
platform_set_drvdata(dev, sport);
return 0;
err_free:
kfree(sport);
return ret;
}
static int serial_pxa_remove(struct platform_device *dev)
......@@ -818,8 +801,8 @@ static int serial_pxa_remove(struct platform_device *dev)
platform_set_drvdata(dev, NULL);
if (sport)
uart_remove_one_port(&serial_pxa_reg, &sport->port);
uart_remove_one_port(&serial_pxa_reg, &sport->port);
kfree(sport);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册