ath10k: improve warm reset reliability

Warm reset is now able to recover after device
crashes which required a cold reset before.

This should greatly reduce chances of getting data
bus errors or host system freezes due to buggy
cold reset on some chips.

kvalo: use ath10k_pci_soc_*()
Signed-off-by: NMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/pci.c

@@ -1802,6 +1802,26 @@ static void ath10k_pci_fw_interrupt_handler(struct ath10k *ar)
 	ath10k_pci_sleep(ar);
 }
 
+/* this function effectively clears target memory controller assert line */
+static void ath10k_pci_warm_reset_si0(struct ath10k *ar)
+{
+	u32 val;
+
+	val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
+	ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS,
+			       val | SOC_RESET_CONTROL_SI0_RST_MASK);
+	val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
+
+	msleep(10);
+
+	val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
+	ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS,
+			       val & ~SOC_RESET_CONTROL_SI0_RST_MASK);
+	val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
+
+	msleep(10);
+}
+
 static int ath10k_pci_warm_reset(struct ath10k *ar)
 {
 	int ret = 0;
@@ -1860,6 +1880,8 @@ static int ath10k_pci_warm_reset(struct ath10k *ar)
 				SOC_RESET_CONTROL_ADDRESS);
 	msleep(10);
 
+	ath10k_pci_warm_reset_si0(ar);
+
 	/* debug */
 	val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
 				PCIE_INTR_CAUSE_ADDRESS);