提交 dcd56fdb 编写于 作者: D Dhananjay Phadke 提交者: Jeff Garzik

netxen: cleanup debug messages

o Remove unnecessary debug prints and functions.
o Explicitly specify pci class (0x020000) to avoid enabling
  management function.
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
上级 3276fbad
......@@ -776,7 +776,6 @@ struct netxen_hardware_context {
u8 revision_id;
u16 board_type;
u16 max_ports;
struct netxen_board_info boardcfg;
u32 xg_linkup;
u32 qg_linksup;
......@@ -1035,7 +1034,6 @@ int netxen_rom_se(struct netxen_adapter *adapter, int addr);
/* Functions from netxen_nic_isr.c */
void netxen_initialize_adapter_sw(struct netxen_adapter *adapter);
void netxen_initialize_adapter_hw(struct netxen_adapter *adapter);
void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr,
struct pci_dev **used_dev);
void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
......@@ -1078,20 +1076,6 @@ static const struct netxen_brdinfo netxen_boards[] = {
#define NUM_SUPPORTED_BOARDS ARRAY_SIZE(netxen_boards)
static inline void get_brd_port_by_type(u32 type, int *ports)
{
int i, found = 0;
for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) {
if (netxen_boards[i].brdtype == type) {
*ports = netxen_boards[i].ports;
found = 1;
break;
}
}
if (!found)
*ports = 0;
}
static inline void get_brd_name_by_type(u32 type, char *name)
{
int i, found = 0;
......
......@@ -396,11 +396,8 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
}
adapter->intr_scheme = readl(
NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW));
printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name,
adapter->intr_scheme);
adapter->msi_mode = readl(
NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW));
DPRINTK(INFO, "Receive Peg ready too. starting stuff\n");
addr = netxen_alloc(adapter->ahw.pdev,
sizeof(struct netxen_ring_ctx) +
......@@ -408,8 +405,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
(dma_addr_t *) & adapter->ctx_desc_phys_addr,
&adapter->ctx_desc_pdev);
printk(KERN_INFO "ctx_desc_phys_addr: 0x%llx\n",
(unsigned long long) adapter->ctx_desc_phys_addr);
if (addr == NULL) {
DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
err = -ENOMEM;
......@@ -429,8 +424,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter)
adapter->max_tx_desc_count,
(dma_addr_t *) & hw->cmd_desc_phys_addr,
&adapter->ahw.cmd_desc_pdev);
printk(KERN_INFO "cmd_desc_phys_addr: 0x%llx\n",
(unsigned long long) hw->cmd_desc_phys_addr);
if (addr == NULL) {
DPRINTK(ERR, "bad return from pci_alloc_consistent\n");
......@@ -1127,7 +1120,6 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
void netxen_nic_flash_print(struct netxen_adapter *adapter)
{
int valid = 1;
u32 fw_major = 0;
u32 fw_minor = 0;
u32 fw_build = 0;
......@@ -1137,70 +1129,62 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
__le32 *ptr32;
struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
if (board_info->magic != NETXEN_BDINFO_MAGIC) {
printk
("NetXen Unknown board config, Read 0x%x expected as 0x%x\n",
board_info->magic, NETXEN_BDINFO_MAGIC);
valid = 0;
}
if (board_info->header_version != NETXEN_BDINFO_VERSION) {
printk("NetXen Unknown board config version."
" Read %x, expected %x\n",
board_info->header_version, NETXEN_BDINFO_VERSION);
valid = 0;
}
if (valid) {
ptr32 = (u32 *)&serial_num;
addr = NETXEN_USER_START +
offsetof(struct netxen_new_user_info, serial_num);
for (i = 0; i < 8; i++) {
if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
printk("%s: ERROR reading %s board userarea.\n",
netxen_nic_driver_name,
netxen_nic_driver_name);
return;
}
ptr32++;
addr += sizeof(u32);
adapter->driver_mismatch = 0;
ptr32 = (u32 *)&serial_num;
addr = NETXEN_USER_START +
offsetof(struct netxen_new_user_info, serial_num);
for (i = 0; i < 8; i++) {
if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
printk("%s: ERROR reading %s board userarea.\n",
netxen_nic_driver_name,
netxen_nic_driver_name);
adapter->driver_mismatch = 1;
return;
}
ptr32++;
addr += sizeof(u32);
}
fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
NETXEN_FW_VERSION_MAJOR));
fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
NETXEN_FW_VERSION_MINOR));
fw_build =
readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
if (adapter->portnum == 0) {
get_brd_name_by_type(board_info->board_type, brd_name);
printk("NetXen %s Board S/N %s Chip id 0x%x\n",
brd_name, serial_num, board_info->chip_id);
printk("NetXen %s Board #%d, Chip id 0x%x\n",
board_info->board_type == 0x0b ? "XGB" : "GBE",
board_info->board_num, board_info->chip_id);
fw_major = readl(NETXEN_CRB_NORMALIZE(adapter,
NETXEN_FW_VERSION_MAJOR));
fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter,
NETXEN_FW_VERSION_MINOR));
fw_build =
readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB));
printk("NetXen Firmware version %d.%d.%d\n", fw_major, fw_minor,
fw_build);
brd_name, serial_num, board_info->chip_id);
printk("NetXen Firmware version %d.%d.%d\n", fw_major,
fw_minor, fw_build);
}
if (fw_major != _NETXEN_NIC_LINUX_MAJOR) {
printk(KERN_ERR "The mismatch in driver version and firmware "
"version major number\n"
"Driver version major number = %d \t"
"Firmware version major number = %d \n",
_NETXEN_NIC_LINUX_MAJOR, fw_major);
adapter->driver_mismatch = 1;
}
if (fw_minor != _NETXEN_NIC_LINUX_MINOR &&
fw_minor != (_NETXEN_NIC_LINUX_MINOR + 1)) {
printk(KERN_ERR "The mismatch in driver version and firmware "
"version minor number\n"
"Driver version minor number = %d \t"
"Firmware version minor number = %d \n",
_NETXEN_NIC_LINUX_MINOR, fw_minor);
adapter->driver_mismatch = 1;
}
if (adapter->driver_mismatch)
printk(KERN_INFO "Use the driver with version no %d.%d.xxx\n",
fw_major, fw_minor);
if (adapter->driver_mismatch) {
printk(KERN_ERR "%s: driver and firmware version mismatch\n",
adapter->netdev->name);
return;
}
switch (adapter->ahw.board_type) {
case NETXEN_NIC_GBE:
dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n",
adapter->netdev->name);
break;
case NETXEN_NIC_XGBE:
dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n",
adapter->netdev->name);
break;
}
}
......@@ -203,21 +203,6 @@ void netxen_initialize_adapter_sw(struct netxen_adapter *adapter)
}
}
void netxen_initialize_adapter_hw(struct netxen_adapter *adapter)
{
int ports = 0;
struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
if (netxen_nic_get_board_info(adapter) != 0)
printk("%s: Error getting board config info.\n",
netxen_nic_driver_name);
get_brd_port_by_type(board_info->board_type, &ports);
if (ports == 0)
printk(KERN_ERR "%s: Unknown board type\n",
netxen_nic_driver_name);
adapter->ahw.max_ports = ports;
}
void netxen_initialize_adapter_ops(struct netxen_adapter *adapter)
{
switch (adapter->ahw.board_type) {
......@@ -765,18 +750,13 @@ int netxen_flash_unlock(struct netxen_adapter *adapter)
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
{
int addr, val, status;
int addr, val;
int n, i;
int init_delay = 0;
struct crb_addr_pair *buf;
u32 off;
/* resetall */
status = netxen_nic_get_board_info(adapter);
if (status)
printk("%s: netxen_pinit_from_rom: Error getting board info\n",
netxen_nic_driver_name);
netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
NETXEN_ROMBUS_RESET);
......
......@@ -72,13 +72,13 @@ static irqreturn_t netxen_msi_intr(int irq, void *data);
/* PCI Device ID Table */
static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
{PCI_DEVICE(0x4040, 0x0001)},
{PCI_DEVICE(0x4040, 0x0002)},
{PCI_DEVICE(0x4040, 0x0003)},
{PCI_DEVICE(0x4040, 0x0004)},
{PCI_DEVICE(0x4040, 0x0005)},
{PCI_DEVICE(0x4040, 0x0024)},
{PCI_DEVICE(0x4040, 0x0025)},
{PCI_DEVICE(0x4040, 0x0001), PCI_DEVICE_CLASS(0x020000, ~0)},
{PCI_DEVICE(0x4040, 0x0002), PCI_DEVICE_CLASS(0x020000, ~0)},
{PCI_DEVICE(0x4040, 0x0003), PCI_DEVICE_CLASS(0x020000, ~0)},
{PCI_DEVICE(0x4040, 0x0004), PCI_DEVICE_CLASS(0x020000, ~0)},
{PCI_DEVICE(0x4040, 0x0005), PCI_DEVICE_CLASS(0x020000, ~0)},
{PCI_DEVICE(0x4040, 0x0024), PCI_DEVICE_CLASS(0x020000, ~0)},
{PCI_DEVICE(0x4040, 0x0025), PCI_DEVICE_CLASS(0x020000, ~0)},
{0,}
};
......@@ -286,10 +286,11 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
int pci_func_id = PCI_FUNC(pdev->devfn);
DECLARE_MAC_BUF(mac);
printk(KERN_INFO "%s \n", netxen_nic_driver_string);
if (pci_func_id == 0)
printk(KERN_INFO "%s \n", netxen_nic_driver_string);
if (pdev->class != 0x020000) {
printk(KERN_ERR"NetXen function %d, class %x will not "
printk(KERN_DEBUG "NetXen function %d, class %x will not "
"be enabled.\n",pci_func_id, pdev->class);
return -ENODEV;
}
......@@ -448,8 +449,12 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
adapter->curr_window = 255;
/* initialize the adapter */
netxen_initialize_adapter_hw(adapter);
if (netxen_nic_get_board_info(adapter) != 0) {
printk("%s: Error getting board config info.\n",
netxen_nic_driver_name);
err = -EIO;
goto err_out_iounmap;
}
/*
* Adapter in our case is quad port so initialize it before
......@@ -621,7 +626,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* clear the register for future unloads/loads */
writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
printk(KERN_INFO "State: 0x%0x\n",
printk(KERN_DEBUG "State: 0x%0x\n",
readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
/*
......@@ -643,6 +648,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/*
* See if the firmware gave us a virtual-physical port mapping.
*/
adapter->physical_port = adapter->portnum;
i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum)));
if (i != 0x55555555)
adapter->physical_port = i;
......@@ -658,22 +664,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out_free_dev;
}
netxen_nic_flash_print(adapter);
pci_set_drvdata(pdev, adapter);
switch (adapter->ahw.board_type) {
case NETXEN_NIC_GBE:
printk(KERN_INFO "%s: QUAD GbE board initialized\n",
netxen_nic_driver_name);
break;
case NETXEN_NIC_XGBE:
printk(KERN_INFO "%s: XGbE board initialized\n",
netxen_nic_driver_name);
break;
}
adapter->driver_mismatch = 0;
return 0;
err_out_free_dev:
......@@ -781,9 +774,6 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
/* clear the register for future unloads/loads */
writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
printk(KERN_INFO "State: 0x%0x\n",
readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
/* leave the hw in the same state as reboot */
writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
netxen_pinit_from_rom(adapter, 0);
......@@ -794,7 +784,7 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
/* clear the register for future unloads/loads */
writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc)));
printk(KERN_INFO "State: 0x%0x\n",
printk(KERN_DEBUG "State: 0x%0x\n",
readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)));
i = 100;
......@@ -844,13 +834,15 @@ static int netxen_nic_open(struct net_device *netdev)
irq_handler_t handler;
unsigned long flags = IRQF_SAMPLE_RANDOM;
if (adapter->driver_mismatch)
return -EIO;
if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) {
err = netxen_init_firmware(adapter);
if (err != 0) {
printk(KERN_ERR "Failed to init firmware\n");
return -EIO;
}
netxen_nic_flash_print(adapter);
/* setup all the resources for the Phantom... */
/* this include the descriptors for rcv, tx, and status */
......@@ -899,14 +891,12 @@ static int netxen_nic_open(struct net_device *netdev)
if (adapter->set_mtu)
adapter->set_mtu(adapter, netdev->mtu);
if (!adapter->driver_mismatch)
mod_timer(&adapter->watchdog_timer, jiffies);
mod_timer(&adapter->watchdog_timer, jiffies);
napi_enable(&adapter->napi);
netxen_nic_enable_int(adapter);
if (!adapter->driver_mismatch)
netif_start_queue(netdev);
netif_start_queue(netdev);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册