Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

提交 db54eb57 编写于 作者: S Stanislaw Gruszka
浏览文件
操作

iwlegacy: rename il_{read,write}_prph 

Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
上级 0c1a94e2
隐藏空白更改
内联 并排
Showing with 72 addition and 71 deletion
drivers/net/wireless/iwlegacy/iwl-3945.c
浏览文件 @ db54eb57
......@@ -797,18 +797,18 @@ static int il3945_tx_reset(struct il_priv *il)
{
/* bypass mode */
il_write_prph(il, ALM_SCD_MODE_REG, 0x2);
il_wr_prph(il, ALM_SCD_MODE_REG, 0x2);
/* RA 0 is active */
il_write_prph(il, ALM_SCD_ARASTAT_REG, 0x01);
il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01);
/* all 6 fifo are active */
il_write_prph(il, ALM_SCD_TXFACT_REG, 0x3f);
il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f);
il_write_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
il_write_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
il_write_prph(il, ALM_SCD_TXF4MF_REG, 0x000004);
il_write_prph(il, ALM_SCD_TXF5MF_REG, 0x000005);
il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004);
il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005);
il_wr(il, FH39_TSSR_CBB_BASE,
il->_3945.shared_phys);
......@@ -878,8 +878,8 @@ static int il3945_apm_init(struct il_priv *il)
int ret = il_apm_init(il);
/* Clear APMG (NIC's internal power management) interrupts */
il_write_prph(il, APMG_RTC_INT_MSK_REG, 0x0);
il_write_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0);
il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
/* Reset radio chip */
il_set_bits_prph(il, APMG_PS_CTRL_REG,
......@@ -1025,8 +1025,8 @@ void il3945_hw_txq_ctx_stop(struct il_priv *il)
int txq_id;
/* stop SCD */
il_write_prph(il, ALM_SCD_MODE_REG, 0);
il_write_prph(il, ALM_SCD_TXFACT_REG, 0);
il_wr_prph(il, ALM_SCD_MODE_REG, 0);
il_wr_prph(il, ALM_SCD_TXFACT_REG, 0);
/* reset TFD queues */
for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
......@@ -2475,11 +2475,11 @@ static int il3945_verify_bsm(struct il_priv *il)
D_INFO("Begin verify bsm\n");
/* verify BSM SRAM contents */
val = il_read_prph(il, BSM_WR_DWCOUNT_REG);
val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
for (reg = BSM_SRAM_LOWER_BOUND;
reg < BSM_SRAM_LOWER_BOUND + len;
reg += sizeof(u32), image++) {
val = il_read_prph(il, reg);
val = il_rd_prph(il, reg);
if (val != le32_to_cpu(*image)) {
IL_ERR("BSM uCode verification failed at "
"addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
......@@ -2583,16 +2583,16 @@ static int il3945_load_bsm(struct il_priv *il)
inst_len = il->ucode_init.len;
data_len = il->ucode_init_data.len;
il_write_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_write_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_write_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
il_write_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
/* Fill BSM memory with bootstrap instructions */
for (reg_offset = BSM_SRAM_LOWER_BOUND;
reg_offset < BSM_SRAM_LOWER_BOUND + len;
reg_offset += sizeof(u32), image++)
_il_write_prph(il, reg_offset,
_il_wr_prph(il, reg_offset,
le32_to_cpu(*image));
rc = il3945_verify_bsm(il);
......@@ -2600,19 +2600,19 @@ static int il3945_load_bsm(struct il_priv *il)
return rc;
/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
il_write_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
il_write_prph(il, BSM_WR_MEM_DST_REG,
il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
il_wr_prph(il, BSM_WR_MEM_DST_REG,
IWL39_RTC_INST_LOWER_BOUND);
il_write_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
/* Load bootstrap code into instruction SRAM now,
* to prepare to load "initialize" uCode */
il_write_prph(il, BSM_WR_CTRL_REG,
il_wr_prph(il, BSM_WR_CTRL_REG,
BSM_WR_CTRL_REG_BIT_START);
/* Wait for load of bootstrap uCode to finish */
for (i = 0; i < 100; i++) {
done = il_read_prph(il, BSM_WR_CTRL_REG);
done = il_rd_prph(il, BSM_WR_CTRL_REG);
if (!(done & BSM_WR_CTRL_REG_BIT_START))
break;
udelay(10);
......@@ -2626,7 +2626,7 @@ static int il3945_load_bsm(struct il_priv *il)
/* Enable future boot loads whenever power management unit triggers it
* (e.g. when powering back up after power-save shutdown) */
il_write_prph(il, BSM_WR_CTRL_REG,
il_wr_prph(il, BSM_WR_CTRL_REG,
BSM_WR_CTRL_REG_BIT_START_EN);
return 0;
......
drivers/net/wireless/iwlegacy/iwl-4965-tx.c
浏览文件 @ db54eb57
......@@ -754,7 +754,7 @@ static void il4965_tx_queue_stop_scheduler(struct il_priv *il,
{
/* Simply stop the queue, but don't change any configuration;
* the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
il_write_prph(il,
il_wr_prph(il,
IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
(0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
(1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
......
drivers/net/wireless/iwlegacy/iwl-4965.c
浏览文件 @ db54eb57
......@@ -72,11 +72,11 @@ static int il4965_verify_bsm(struct il_priv *il)
D_INFO("Begin verify bsm\n");
/* verify BSM SRAM contents */
val = il_read_prph(il, BSM_WR_DWCOUNT_REG);
val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
for (reg = BSM_SRAM_LOWER_BOUND;
reg < BSM_SRAM_LOWER_BOUND + len;
reg += sizeof(u32), image++) {
val = il_read_prph(il, reg);
val = il_rd_prph(il, reg);
if (val != le32_to_cpu(*image)) {
IL_ERR("BSM uCode verification failed at "
"addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
......@@ -156,34 +156,34 @@ static int il4965_load_bsm(struct il_priv *il)
inst_len = il->ucode_init.len;
data_len = il->ucode_init_data.len;
il_write_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_write_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_write_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
il_write_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
/* Fill BSM memory with bootstrap instructions */
for (reg_offset = BSM_SRAM_LOWER_BOUND;
reg_offset < BSM_SRAM_LOWER_BOUND + len;
reg_offset += sizeof(u32), image++)
_il_write_prph(il, reg_offset, le32_to_cpu(*image));
_il_wr_prph(il, reg_offset, le32_to_cpu(*image));
ret = il4965_verify_bsm(il);
if (ret)
return ret;
/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
il_write_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
il_write_prph(il,
il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
il_wr_prph(il,
BSM_WR_MEM_DST_REG, IWL49_RTC_INST_LOWER_BOUND);
il_write_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
/* Load bootstrap code into instruction SRAM now,
* to prepare to load "initialize" uCode */
il_write_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
/* Wait for load of bootstrap uCode to finish */
for (i = 0; i < 100; i++) {
done = il_read_prph(il, BSM_WR_CTRL_REG);
done = il_rd_prph(il, BSM_WR_CTRL_REG);
if (!(done & BSM_WR_CTRL_REG_BIT_START))
break;
udelay(10);
......@@ -197,7 +197,7 @@ static int il4965_load_bsm(struct il_priv *il)
/* Enable future boot loads whenever power management unit triggers it
* (e.g. when powering back up after power-save shutdown) */
il_write_prph(il,
il_wr_prph(il,
BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
......@@ -224,14 +224,14 @@ static int il4965_set_ucode_ptrs(struct il_priv *il)
pdata = il->ucode_data_backup.p_addr >> 4;
/* Tell bootstrap uCode where to find image to load */
il_write_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_write_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_write_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
il->ucode_data.len);
/* Inst byte count must be last to set up, bit 31 signals uCode
* that all new ptr/size info is in place */
il_write_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
il->ucode_code.len | BSM_DRAM_INST_LOAD);
D_INFO("Runtime uCode pointers are set.\n");
......
drivers/net/wireless/iwlegacy/iwl-core.c
浏览文件 @ db54eb57
......@@ -1069,7 +1069,7 @@ int il_apm_init(struct il_priv *il)
/*
* Wait for clock stabilization; once stabilized, access to
* device-internal resources is supported, e.g. il_write_prph()
* device-internal resources is supported, e.g. il_wr_prph()
* and accesses to uCode SRAM.
*/
ret = _il_poll_bit(il, CSR_GP_CNTRL,
......@@ -1089,10 +1089,10 @@ int il_apm_init(struct il_priv *il)
* set by default in "CLK_CTRL_REG" after reset.
*/
if (il->cfg->base_params->use_bsm)
il_write_prph(il, APMG_CLK_EN_REG,
il_wr_prph(il, APMG_CLK_EN_REG,
APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
else
il_write_prph(il, APMG_CLK_EN_REG,
il_wr_prph(il, APMG_CLK_EN_REG,
APMG_CLK_VAL_DMA_CLK_RQT);
udelay(20);
......
drivers/net/wireless/iwlegacy/iwl-io.h
浏览文件 @ db54eb57
......@@ -197,26 +197,27 @@ static inline int il_poll_bit(struct il_priv *il, u32 addr,
return -ETIMEDOUT;
}
static inline u32 _il_read_prph(struct il_priv *il, u32 reg)
static inline u32 _il_rd_prph(struct il_priv *il, u32 reg)
{
_il_wr(il, HBUS_TARG_PRPH_RADDR, reg | (3 << 24));
rmb();
return _il_rd(il, HBUS_TARG_PRPH_RDAT);
}
static inline u32 il_read_prph(struct il_priv *il, u32 reg)
static inline u32 il_rd_prph(struct il_priv *il, u32 reg)
{
unsigned long reg_flags;
u32 val;
spin_lock_irqsave(&il->reg_lock, reg_flags);
_il_grab_nic_access(il);
val = _il_read_prph(il, reg);
val = _il_rd_prph(il, reg);
_il_release_nic_access(il);
spin_unlock_irqrestore(&il->reg_lock, reg_flags);
return val;
}
static inline void _il_write_prph(struct il_priv *il,
static inline void _il_wr_prph(struct il_priv *il,
u32 addr, u32 val)
{
_il_wr(il, HBUS_TARG_PRPH_WADDR,
......@@ -226,20 +227,20 @@ static inline void _il_write_prph(struct il_priv *il,
}
static inline void
il_write_prph(struct il_priv *il, u32 addr, u32 val)
il_wr_prph(struct il_priv *il, u32 addr, u32 val)
{
unsigned long reg_flags;
spin_lock_irqsave(&il->reg_lock, reg_flags);
if (!_il_grab_nic_access(il)) {
_il_write_prph(il, addr, val);
_il_wr_prph(il, addr, val);
_il_release_nic_access(il);
}
spin_unlock_irqrestore(&il->reg_lock, reg_flags);
}
#define _il_set_bits_prph(il, reg, mask) \
_il_write_prph(il, reg, (_il_read_prph(il, reg) | mask))
_il_wr_prph(il, reg, (_il_rd_prph(il, reg) | mask))
static inline void
il_set_bits_prph(struct il_priv *il, u32 reg, u32 mask)
......@@ -254,8 +255,8 @@ il_set_bits_prph(struct il_priv *il, u32 reg, u32 mask)
}
#define _il_set_bits_mask_prph(il, reg, bits, mask) \
_il_write_prph(il, reg, \
((_il_read_prph(il, reg) & mask) | bits))
_il_wr_prph(il, reg, \
((_il_rd_prph(il, reg) & mask) | bits))
static inline void il_set_bits_mask_prph(struct il_priv *il, u32 reg,
u32 bits, u32 mask)
......@@ -277,8 +278,8 @@ static inline void il_clear_bits_prph(struct il_priv
spin_lock_irqsave(&il->reg_lock, reg_flags);
_il_grab_nic_access(il);
val = _il_read_prph(il, reg);
_il_write_prph(il, reg, (val & ~mask));
val = _il_rd_prph(il, reg);
_il_wr_prph(il, reg, (val & ~mask));
_il_release_nic_access(il);
spin_unlock_irqrestore(&il->reg_lock, reg_flags);
}
......
drivers/net/wireless/iwlegacy/iwl3945-base.c
浏览文件 @ db54eb57
......@@ -2122,14 +2122,14 @@ static int il3945_set_ucode_ptrs(struct il_priv *il)
pdata = il->ucode_data_backup.p_addr;
/* Tell bootstrap uCode where to find image to load */
il_write_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_write_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_write_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
il->ucode_data.len);
/* Inst byte count must be last to set up, bit 31 signals uCode
* that all new ptr/size info is in place */
il_write_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
il->ucode_code.len | BSM_DRAM_INST_LOAD);
D_INFO("Runtime uCode pointers are set.\n");
......@@ -2210,7 +2210,7 @@ static void il3945_alive_start(struct il_priv *il)
goto restart;
}
rfkill = il_read_prph(il, APMG_RFKILL_REG);
rfkill = il_rd_prph(il, APMG_RFKILL_REG);
D_INFO("RFKILL status: 0x%x\n", rfkill);
if (rfkill & 0x1) {
......@@ -2342,7 +2342,7 @@ static void __il3945_down(struct il_priv *il)
il3945_hw_rxq_stop(il);
/* Power-down device's busmaster DMA clocks */
il_write_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
udelay(5);
/* Stop the device, and put it in low power state */
......
drivers/net/wireless/iwlegacy/iwl4965-base.c
浏览文件 @ db54eb57
......@@ -1622,7 +1622,7 @@ static int il4965_alive_notify(struct il_priv *il)
spin_lock_irqsave(&il->lock, flags);
/* Clear 4965's internal Tx Scheduler data base */
il->scd_base_addr = il_read_prph(il,
il->scd_base_addr = il_rd_prph(il,
IWL49_SCD_SRAM_BASE_ADDR);
a = il->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
for (; a < il->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
......@@ -1634,7 +1634,7 @@ static int il4965_alive_notify(struct il_priv *il)
il_write_targ_mem(il, a, 0);
/* Tel 4965 where to find Tx byte count tables */
il_write_prph(il, IWL49_SCD_DRAM_BASE_ADDR,
il_wr_prph(il, IWL49_SCD_DRAM_BASE_ADDR,
il->scd_bc_tbls.dma >> 10);
/* Enable DMA channel */
......@@ -1650,13 +1650,13 @@ static int il4965_alive_notify(struct il_priv *il)
reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
/* Disable chain mode for all queues */
il_write_prph(il, IWL49_SCD_QUEUECHAIN_SEL, 0);
il_wr_prph(il, IWL49_SCD_QUEUECHAIN_SEL, 0);
/* Initialize each Tx queue (including the command queue) */
for (i = 0; i < il->hw_params.max_txq_num; i++) {
/* TFD circular buffer read/write indexes */
il_write_prph(il, IWL49_SCD_QUEUE_RDPTR(i), 0);
il_wr_prph(il, IWL49_SCD_QUEUE_RDPTR(i), 0);
il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8));
/* Max Tx Window size for Scheduler-ACK mode */
......@@ -1675,7 +1675,7 @@ static int il4965_alive_notify(struct il_priv *il)
IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
}
il_write_prph(il, IWL49_SCD_INTERRUPT_MASK,
il_wr_prph(il, IWL49_SCD_INTERRUPT_MASK,
(1 << il->hw_params.max_txq_num) - 1);
/* Activate all Tx DMA/FIFO channels */
......@@ -1868,7 +1868,7 @@ static void __il4965_down(struct il_priv *il)
il4965_rxq_stop(il);
/* Power-down device's busmaster DMA clocks */
il_write_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
udelay(5);
/* Make sure (redundant) we've released our request to stay awake */
......@@ -2733,7 +2733,7 @@ void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 index)
{
il_wr(il, HBUS_TARG_WRPTR,
(index & 0xff) | (txq_id << 8));
il_write_prph(il, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
il_wr_prph(il, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
}
void il4965_tx_queue_set_status(struct il_priv *il,
......@@ -2746,7 +2746,7 @@ void il4965_tx_queue_set_status(struct il_priv *il,
int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0;
/* Set up and activate */
il_write_prph(il, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
il_wr_prph(il, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
(active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
(tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) |
(scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) |
......@@ -3195,7 +3195,7 @@ static void __devexit il4965_pci_remove(struct pci_dev *pdev)
*/
void il4965_txq_set_sched(struct il_priv *il, u32 mask)
{
il_write_prph(il, IWL49_SCD_TXFACT, mask);
il_wr_prph(il, IWL49_SCD_TXFACT, mask);
}
/*****************************************************************************
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或