提交 d24c8f24 编写于 作者: R Robert Jarzmik 提交者: David S. Miller

net: smc91x: convert pxa dma to dmaengine

Convert the dma transfers to be dmaengine based, now pxa has a dmaengine
slave driver. This makes this driver a bit more PXA agnostic.

The driver was tested on pxa27x (mainstone) and pxa310 (zylonite),
ie. only pxa platforms.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 37d2dbcd
......@@ -2018,10 +2018,18 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
lp->cfg.flags |= SMC91X_USE_DMA;
# endif
if (lp->cfg.flags & SMC91X_USE_DMA) {
int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW,
smc_pxa_dma_irq, NULL);
if (dma >= 0)
dev->dma = dma;
dma_cap_mask_t mask;
struct pxad_param param;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
param.prio = PXAD_PRIO_LOWEST;
param.drcmr = -1UL;
lp->dma_chan =
dma_request_slave_channel_compat(mask, pxad_filter_fn,
&param, &dev->dev,
"data");
}
#endif
......@@ -2032,8 +2040,8 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
version_string, revision_register & 0x0f,
lp->base, dev->irq);
if (dev->dma != (unsigned char)-1)
pr_cont(" DMA %d", dev->dma);
if (lp->dma_chan)
pr_cont(" DMA %p", lp->dma_chan);
pr_cont("%s%s\n",
lp->cfg.flags & SMC91X_NOWAIT ? " [nowait]" : "",
......@@ -2058,8 +2066,8 @@ static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
err_out:
#ifdef CONFIG_ARCH_PXA
if (retval && dev->dma != (unsigned char)-1)
pxa_free_dma(dev->dma);
if (retval && lp->dma_chan)
dma_release_channel(lp->dma_chan);
#endif
return retval;
}
......@@ -2370,6 +2378,7 @@ static int smc_drv_probe(struct platform_device *pdev)
struct smc_local *lp = netdev_priv(ndev);
lp->device = &pdev->dev;
lp->physaddr = res->start;
}
#endif
......@@ -2406,8 +2415,8 @@ static int smc_drv_remove(struct platform_device *pdev)
free_irq(ndev->irq, ndev);
#ifdef CONFIG_ARCH_PXA
if (ndev->dma != (unsigned char)-1)
pxa_free_dma(ndev->dma);
if (lp->dma_chan)
dma_release_channel(lp->dma_chan);
#endif
iounmap(lp->base);
......
......@@ -33,6 +33,7 @@
#ifndef _SMC91X_H_
#define _SMC91X_H_
#include <linux/dmaengine.h>
#include <linux/smc91x.h>
/*
......@@ -244,6 +245,7 @@ struct smc_local {
u_long physaddr;
struct device *device;
#endif
struct dma_chan *dma_chan;
void __iomem *base;
void __iomem *datacs;
......@@ -265,21 +267,47 @@ struct smc_local {
* as RX which can overrun memory and lose packets.
*/
#include <linux/dma-mapping.h>
#include <mach/dma.h>
#include <linux/dma/pxa-dma.h>
#ifdef SMC_insl
#undef SMC_insl
#define SMC_insl(a, r, p, l) \
smc_pxa_dma_insl(a, lp, r, dev->dma, p, l)
static inline void
smc_pxa_dma_inpump(struct smc_local *lp, u_char *buf, int len)
{
dma_addr_t dmabuf;
struct dma_async_tx_descriptor *tx;
dma_cookie_t cookie;
enum dma_status status;
struct dma_tx_state state;
dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
tx = dmaengine_prep_slave_single(lp->dma_chan, dmabuf, len,
DMA_DEV_TO_MEM, 0);
if (tx) {
cookie = dmaengine_submit(tx);
dma_async_issue_pending(lp->dma_chan);
do {
status = dmaengine_tx_status(lp->dma_chan, cookie,
&state);
cpu_relax();
} while (status != DMA_COMPLETE && status != DMA_ERROR &&
state.residue);
dmaengine_terminate_all(lp->dma_chan);
}
dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
}
static inline void
smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
u_char *buf, int len)
{
u_long physaddr = lp->physaddr;
dma_addr_t dmabuf;
struct dma_slave_config config;
int ret;
/* fallback if no DMA available */
if (dma == (unsigned char)-1) {
if (!lp->dma_chan) {
readsl(ioaddr + reg, buf, len);
return;
}
......@@ -291,18 +319,22 @@ smc_pxa_dma_insl(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
len--;
}
memset(&config, 0, sizeof(config));
config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
config.src_addr = lp->physaddr + reg;
config.dst_addr = lp->physaddr + reg;
config.src_maxburst = 32;
config.dst_maxburst = 32;
ret = dmaengine_slave_config(lp->dma_chan, &config);
if (ret) {
dev_err(lp->device, "dma channel configuration failed: %d\n",
ret);
return;
}
len *= 4;
dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
DCSR(dma) = DCSR_NODESC;
DTADR(dma) = dmabuf;
DSADR(dma) = physaddr + reg;
DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
DCMD_WIDTH4 | (DCMD_LENGTH & len));
DCSR(dma) = DCSR_NODESC | DCSR_RUN;
while (!(DCSR(dma) & DCSR_STOPSTATE))
cpu_relax();
DCSR(dma) = 0;
dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
smc_pxa_dma_inpump(lp, buf, len);
}
#endif
......@@ -314,11 +346,11 @@ static inline void
smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
u_char *buf, int len)
{
u_long physaddr = lp->physaddr;
dma_addr_t dmabuf;
struct dma_slave_config config;
int ret;
/* fallback if no DMA available */
if (dma == (unsigned char)-1) {
if (!lp->dma_chan) {
readsw(ioaddr + reg, buf, len);
return;
}
......@@ -330,26 +362,25 @@ smc_pxa_dma_insw(void __iomem *ioaddr, struct smc_local *lp, int reg, int dma,
len--;
}
memset(&config, 0, sizeof(config));
config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
config.src_addr = lp->physaddr + reg;
config.dst_addr = lp->physaddr + reg;
config.src_maxburst = 32;
config.dst_maxburst = 32;
ret = dmaengine_slave_config(lp->dma_chan, &config);
if (ret) {
dev_err(lp->device, "dma channel configuration failed: %d\n",
ret);
return;
}
len *= 2;
dmabuf = dma_map_single(lp->device, buf, len, DMA_FROM_DEVICE);
DCSR(dma) = DCSR_NODESC;
DTADR(dma) = dmabuf;
DSADR(dma) = physaddr + reg;
DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
DCMD_WIDTH2 | (DCMD_LENGTH & len));
DCSR(dma) = DCSR_NODESC | DCSR_RUN;
while (!(DCSR(dma) & DCSR_STOPSTATE))
cpu_relax();
DCSR(dma) = 0;
dma_unmap_single(lp->device, dmabuf, len, DMA_FROM_DEVICE);
smc_pxa_dma_inpump(lp, buf, len);
}
#endif
static void
smc_pxa_dma_irq(int dma, void *dummy)
{
DCSR(dma) = 0;
}
#endif /* CONFIG_ARCH_PXA */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册