提交 d0f349fb 编写于 作者: J Juergen Beisert 提交者: Robert Schwebel

i.MXC family: Adding timer support

This patch adds timer support for the i.MX machine family. This code can
be used on the following machs:

 - i.MX1 (tested)
 - i.MX2 (i.MX21 (to be tested), i.MX27 (tested))
 - i.MX3 (i.MX31 (tested))

TODO: It seems impossible to build a kernel for more than one CPU because the
timer do not follow the platform device rules. So it does only work if
timer 1 can be accessed on all CPUs at the same address.
Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
上级 90292ea6
......@@ -367,6 +367,8 @@ config ARCH_NS9XXX
config ARCH_MXC
bool "Freescale MXC/iMX-based"
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_MTD_XIP
select GENERIC_GPIO
select HAVE_GPIO_LIB
......
......@@ -4,5 +4,5 @@
# Object file lists.
obj-y := mm.o time.o clock.o devices.o iomux.o
obj-y := mm.o clock.o devices.o iomux.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
......@@ -26,6 +26,7 @@
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <asm/arch/common.h>
......@@ -127,6 +128,16 @@ static void __init mxc_board_init(void)
mxc_init_extuart();
}
static void __init mx31ads_timer_init(void)
{
mxc_clocks_init(26000000);
mxc_timer_init("ipg_clk.0");
}
struct sys_timer mx31ads_timer = {
.init = mx31ads_timer_init,
};
/*
* The following uses standard kernel macros defined in arch.h in order to
* initialize __mach_desc_MX31ADS data structure.
......@@ -139,5 +150,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
.map_io = mx31ads_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mxc_timer,
.timer = &mx31ads_timer,
MACHINE_END
/*
* System Timer Interrupt reconfigured to run in free-run mode.
* Author: Vitaly Wool
* Copyright 2004 MontaVista Software Inc.
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*!
* @file time.c
* @brief This file contains OS tick and wdog timer implementations.
*
* This file contains OS tick and wdog timer implementations.
*
* @ingroup Timers
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/hardware.h>
#include <asm/mach/time.h>
#include <asm/io.h>
#include <asm/arch/common.h>
/*!
* This is the timer interrupt service routine to do required tasks.
* It also services the WDOG timer at the frequency of twice per WDOG
* timeout value. For example, if the WDOG's timeout value is 4 (2
* seconds since the WDOG runs at 0.5Hz), it will be serviced once
* every 2/2=1 second.
*
* @param irq GPT interrupt source number (not used)
* @param dev_id this parameter is not used
* @return always returns \b IRQ_HANDLED as defined in
* include/linux/interrupt.h.
*/
static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
{
unsigned int next_match;
if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) {
do {
timer_tick();
next_match = __raw_readl(MXC_GPT_GPTOCR1) + LATCH;
__raw_writel(GPTSR_OF1, MXC_GPT_GPTSR);
__raw_writel(next_match, MXC_GPT_GPTOCR1);
} while ((signed long)(next_match -
__raw_readl(MXC_GPT_GPTCNT)) <= 0);
}
return IRQ_HANDLED;
}
/*!
* This function is used to obtain the number of microseconds since the last
* timer interrupt. Note that interrupts is disabled by do_gettimeofday().
*
* @return the number of microseconds since the last timer interrupt.
*/
static unsigned long mxc_gettimeoffset(void)
{
unsigned long ticks_to_match, elapsed, usec, tick_usec, i;
/* Get ticks before next timer match */
ticks_to_match =
__raw_readl(MXC_GPT_GPTOCR1) - __raw_readl(MXC_GPT_GPTCNT);
/* We need elapsed ticks since last match */
elapsed = LATCH - ticks_to_match;
/* Now convert them to usec */
/* Insure no overflow when calculating the usec below */
for (i = 1, tick_usec = tick_nsec / 1000;; i *= 2) {
tick_usec /= i;
if ((0xFFFFFFFF / tick_usec) > elapsed)
break;
}
usec = (unsigned long)(elapsed * tick_usec) / (LATCH / i);
return usec;
}
/*!
* The OS tick timer interrupt structure.
*/
static struct irqaction timer_irq = {
.name = "MXC Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = mxc_timer_interrupt
};
/*!
* This function is used to initialize the GPT to produce an interrupt
* based on HZ. It is called by start_kernel() during system startup.
*/
void __init mxc_init_time(void)
{
u32 reg, v;
reg = __raw_readl(MXC_GPT_GPTCR);
reg &= ~GPTCR_ENABLE;
__raw_writel(reg, MXC_GPT_GPTCR);
reg |= GPTCR_SWR;
__raw_writel(reg, MXC_GPT_GPTCR);
while ((__raw_readl(MXC_GPT_GPTCR) & GPTCR_SWR) != 0)
cpu_relax();
reg = GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ;
__raw_writel(reg, MXC_GPT_GPTCR);
/* TODO: get timer rate from clk driver */
v = 66500000;
__raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR);
if ((v % CLOCK_TICK_RATE) != 0) {
pr_info("\nWARNING: Can't generate CLOCK_TICK_RATE at %d Hz\n",
CLOCK_TICK_RATE);
}
pr_info("Actual CLOCK_TICK_RATE is %d Hz\n",
v / ((__raw_readl(MXC_GPT_GPTPR) & 0xFFF) + 1));
reg = __raw_readl(MXC_GPT_GPTCNT);
reg += LATCH;
__raw_writel(reg, MXC_GPT_GPTOCR1);
setup_irq(MXC_INT_GPT, &timer_irq);
reg = __raw_readl(MXC_GPT_GPTCR);
reg =
GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ | GPTCR_STOPEN | GPTCR_DOZEN |
GPTCR_WAITEN | GPTCR_ENMOD | GPTCR_ENABLE;
__raw_writel(reg, MXC_GPT_GPTCR);
__raw_writel(GPTIR_OF1IE, MXC_GPT_GPTIR);
}
struct sys_timer mxc_timer = {
.init = mxc_init_time,
.offset = mxc_gettimeoffset,
};
......@@ -3,4 +3,4 @@
#
# Common support
obj-y := irq.o clock.o gpio.o
obj-y := irq.o clock.o gpio.o time.o
/*
* linux/arch/arm/plat-mxc/time.c
*
* Copyright (C) 2000-2001 Deep Blue Solutions
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/mach/time.h>
#include <asm/arch/common.h>
#include <asm/arch/mxc_timer.h>
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
/* clock source for the timer */
static struct clk *timer_clk;
/* clock source */
static cycle_t mxc_get_cycles(void)
{
return __raw_readl(TIMER_BASE + MXC_TCN);
}
static struct clocksource clocksource_mxc = {
.name = "mxc_timer1",
.rating = 200,
.read = mxc_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static int __init mxc_clocksource_init(void)
{
unsigned int clock;
clock = clk_get_rate(timer_clk);
clocksource_mxc.mult = clocksource_hz2mult(clock,
clocksource_mxc.shift);
clocksource_register(&clocksource_mxc);
return 0;
}
/* clock event */
static int mxc_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long tcmp;
tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
__raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
-ETIME : 0;
}
#ifdef DEBUG
static const char *clock_event_mode_label[] = {
[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
[CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
[CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
};
#endif /* DEBUG */
static void mxc_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned long flags;
/*
* The timer interrupt generation is disabled at least
* for enough time to call mxc_set_next_event()
*/
local_irq_save(flags);
/* Disable interrupt in GPT module */
gpt_irq_disable();
if (mode != clockevent_mode) {
/* Set event time into far-far future */
__raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
TIMER_BASE + MXC_TCMP);
/* Clear pending interrupt */
gpt_irq_acknowledge();
}
#ifdef DEBUG
printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n",
clock_event_mode_label[clockevent_mode],
clock_event_mode_label[mode]);
#endif /* DEBUG */
/* Remember timer mode */
clockevent_mode = mode;
local_irq_restore(flags);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
printk(KERN_ERR"mxc_set_mode: Periodic mode is not "
"supported for i.MX\n");
break;
case CLOCK_EVT_MODE_ONESHOT:
/*
* Do not put overhead of interrupt enable/disable into
* mxc_set_next_event(), the core has about 4 minutes
* to call mxc_set_next_event() or shutdown clock after
* mode switching
*/
local_irq_save(flags);
gpt_irq_enable();
local_irq_restore(flags);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_RESUME:
/* Left event sources disabled, no more interrupts appear */
break;
}
}
/*
* IRQ handler for the timer
*/
static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
gpt_irq_acknowledge();
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction mxc_timer_irq = {
.name = "i.MX Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = mxc_timer_interrupt,
};
static struct clock_event_device clockevent_mxc = {
.name = "mxc_timer1",
.features = CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_mode = mxc_set_mode,
.set_next_event = mxc_set_next_event,
.rating = 200,
};
static int __init mxc_clockevent_init(void)
{
unsigned int clock;
clock = clk_get_rate(timer_clk);
clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC,
clockevent_mxc.shift);
clockevent_mxc.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
clockevent_mxc.min_delta_ns =
clockevent_delta2ns(0xff, &clockevent_mxc);
clockevent_mxc.cpumask = cpumask_of_cpu(0);
clockevents_register_device(&clockevent_mxc);
return 0;
}
void __init mxc_timer_init(const char *clk_timer)
{
timer_clk = clk_get(NULL, clk_timer);
if (!timer_clk) {
printk(KERN_ERR"Cannot determine timer clock. Giving up.\n");
return;
}
clk_enable(timer_clk);
/*
* Initialise to a known state (all timers off, and timing reset)
*/
__raw_writel(0, TIMER_BASE + MXC_TCTL);
__raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
__raw_writel(TCTL_FRR | /* free running */
TCTL_VAL | /* set clocksource and arch specific bits */
TCTL_TEN, /* start the timer */
TIMER_BASE + MXC_TCTL);
/* init and register the timer to the framework */
mxc_clocksource_init();
mxc_clockevent_init();
/* Make irqs happen */
setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
}
......@@ -11,11 +11,9 @@
#ifndef __ASM_ARCH_MXC_COMMON_H__
#define __ASM_ARCH_MXC_COMMON_H__
struct sys_timer;
extern void mxc_map_io(void);
extern void mxc_init_irq(void);
extern struct sys_timer mxc_timer;
extern void mxc_timer_init(const char *clk_timer);
extern int mxc_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
......
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_H__
......@@ -20,97 +29,6 @@
# define cpu_is_mx31() (0)
#endif
/*
*****************************************
* GPT Register definitions *
*****************************************
*/
#define MXC_GPT_GPTCR IO_ADDRESS(GPT1_BASE_ADDR + 0x00)
#define MXC_GPT_GPTPR IO_ADDRESS(GPT1_BASE_ADDR + 0x04)
#define MXC_GPT_GPTSR IO_ADDRESS(GPT1_BASE_ADDR + 0x08)
#define MXC_GPT_GPTIR IO_ADDRESS(GPT1_BASE_ADDR + 0x0C)
#define MXC_GPT_GPTOCR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x10)
#define MXC_GPT_GPTOCR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x14)
#define MXC_GPT_GPTOCR3 IO_ADDRESS(GPT1_BASE_ADDR + 0x18)
#define MXC_GPT_GPTICR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x1C)
#define MXC_GPT_GPTICR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x20)
#define MXC_GPT_GPTCNT IO_ADDRESS(GPT1_BASE_ADDR + 0x24)
/* GPT Control register bit definitions */
#define GPTCR_FO3 (1 << 31)
#define GPTCR_FO2 (1 << 30)
#define GPTCR_FO1 (1 << 29)
#define GPTCR_OM3_SHIFT 26
#define GPTCR_OM3_MASK (7 << GPTCR_OM3_SHIFT)
#define GPTCR_OM3_DISCONNECTED (0 << GPTCR_OM3_SHIFT)
#define GPTCR_OM3_TOGGLE (1 << GPTCR_OM3_SHIFT)
#define GPTCR_OM3_CLEAR (2 << GPTCR_OM3_SHIFT)
#define GPTCR_OM3_SET (3 << GPTCR_OM3_SHIFT)
#define GPTCR_OM3_GENERATE_LOW (7 << GPTCR_OM3_SHIFT)
#define GPTCR_OM2_SHIFT 23
#define GPTCR_OM2_MASK (7 << GPTCR_OM2_SHIFT)
#define GPTCR_OM2_DISCONNECTED (0 << GPTCR_OM2_SHIFT)
#define GPTCR_OM2_TOGGLE (1 << GPTCR_OM2_SHIFT)
#define GPTCR_OM2_CLEAR (2 << GPTCR_OM2_SHIFT)
#define GPTCR_OM2_SET (3 << GPTCR_OM2_SHIFT)
#define GPTCR_OM2_GENERATE_LOW (7 << GPTCR_OM2_SHIFT)
#define GPTCR_OM1_SHIFT 20
#define GPTCR_OM1_MASK (7 << GPTCR_OM1_SHIFT)
#define GPTCR_OM1_DISCONNECTED (0 << GPTCR_OM1_SHIFT)
#define GPTCR_OM1_TOGGLE (1 << GPTCR_OM1_SHIFT)
#define GPTCR_OM1_CLEAR (2 << GPTCR_OM1_SHIFT)
#define GPTCR_OM1_SET (3 << GPTCR_OM1_SHIFT)
#define GPTCR_OM1_GENERATE_LOW (7 << GPTCR_OM1_SHIFT)
#define GPTCR_IM2_SHIFT 18
#define GPTCR_IM2_MASK (3 << GPTCR_IM2_SHIFT)
#define GPTCR_IM2_CAPTURE_DISABLE (0 << GPTCR_IM2_SHIFT)
#define GPTCR_IM2_CAPTURE_RISING (1 << GPTCR_IM2_SHIFT)
#define GPTCR_IM2_CAPTURE_FALLING (2 << GPTCR_IM2_SHIFT)
#define GPTCR_IM2_CAPTURE_BOTH (3 << GPTCR_IM2_SHIFT)
#define GPTCR_IM1_SHIFT 16
#define GPTCR_IM1_MASK (3 << GPTCR_IM1_SHIFT)
#define GPTCR_IM1_CAPTURE_DISABLE (0 << GPTCR_IM1_SHIFT)
#define GPTCR_IM1_CAPTURE_RISING (1 << GPTCR_IM1_SHIFT)
#define GPTCR_IM1_CAPTURE_FALLING (2 << GPTCR_IM1_SHIFT)
#define GPTCR_IM1_CAPTURE_BOTH (3 << GPTCR_IM1_SHIFT)
#define GPTCR_SWR (1 << 15)
#define GPTCR_FRR (1 << 9)
#define GPTCR_CLKSRC_SHIFT 6
#define GPTCR_CLKSRC_MASK (7 << GPTCR_CLKSRC_SHIFT)
#define GPTCR_CLKSRC_NOCLOCK (0 << GPTCR_CLKSRC_SHIFT)
#define GPTCR_CLKSRC_HIGHFREQ (2 << GPTCR_CLKSRC_SHIFT)
#define GPTCR_CLKSRC_CLKIN (3 << GPTCR_CLKSRC_SHIFT)
#define GPTCR_CLKSRC_CLK32K (7 << GPTCR_CLKSRC_SHIFT)
#define GPTCR_STOPEN (1 << 5)
#define GPTCR_DOZEN (1 << 4)
#define GPTCR_WAITEN (1 << 3)
#define GPTCR_DBGEN (1 << 2)
#define GPTCR_ENMOD (1 << 1)
#define GPTCR_ENABLE (1 << 0)
#define GPTSR_OF1 (1 << 0)
#define GPTSR_OF2 (1 << 1)
#define GPTSR_OF3 (1 << 2)
#define GPTSR_IF1 (1 << 3)
#define GPTSR_IF2 (1 << 4)
#define GPTSR_ROV (1 << 5)
#define GPTIR_OF1IE GPTSR_OF1
#define GPTIR_OF2IE GPTSR_OF2
#define GPTIR_OF3IE GPTSR_OF3
#define GPTIR_IF1IE GPTSR_IF1
#define GPTIR_IF2IE GPTSR_IF2
#define GPTIR_ROVIE GPTSR_ROV
/*
*****************************************
* AVIC Registers *
......
/*
* mxc_timer.h
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#ifndef __PLAT_MXC_TIMER_H
#define __PLAT_MXC_TIMER_H
#include <linux/clk.h>
#include <asm/hardware.h>
#ifdef CONFIG_ARCH_IMX
#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
#define TIMER_INTERRUPT TIM1_INT
#define TCTL_VAL TCTL_CLK_PCLK1
#define TCTL_IRQEN (1<<4)
#define TCTL_FRR (1<<8)
#define TCTL_CLK_PCLK1 (1<<1)
#define TCTL_CLK_PCLK1_4 (2<<1)
#define TCTL_CLK_TIN (3<<1)
#define TCTL_CLK_32 (4<<1)
#define MXC_TCTL 0x00
#define MXC_TPRER 0x04
#define MXC_TCMP 0x08
#define MXC_TCR 0x0c
#define MXC_TCN 0x10
#define MXC_TSTAT 0x14
#define TSTAT_CAPT (1<<1)
#define TSTAT_COMP (1<<0)
static inline void gpt_irq_disable(void)
{
unsigned int tmp;
tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
}
static inline void gpt_irq_enable(void)
{
__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
TIMER_BASE + MXC_TCTL);
}
static void gpt_irq_acknowledge(void)
{
__raw_writel(0, TIMER_BASE + MXC_TSTAT);
}
#endif /* CONFIG_ARCH_IMX */
#ifdef CONFIG_ARCH_MX2
#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
#define TIMER_INTERRUPT MXC_INT_GPT1
#define MXC_TCTL 0x00
#define TCTL_VAL TCTL_CLK_PCLK1
#define TCTL_CLK_PCLK1 (1<<1)
#define TCTL_CLK_PCLK1_4 (2<<1)
#define TCTL_IRQEN (1<<4)
#define TCTL_FRR (1<<8)
#define MXC_TPRER 0x04
#define MXC_TCMP 0x08
#define MXC_TCR 0x0c
#define MXC_TCN 0x10
#define MXC_TSTAT 0x14
#define TSTAT_CAPT (1<<1)
#define TSTAT_COMP (1<<0)
static inline void gpt_irq_disable(void)
{
unsigned int tmp;
tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
}
static inline void gpt_irq_enable(void)
{
__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
TIMER_BASE + MXC_TCTL);
}
static void gpt_irq_acknowledge(void)
{
__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
}
#endif /* CONFIG_ARCH_MX2 */
#ifdef CONFIG_ARCH_MX3
#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
#define TIMER_INTERRUPT MXC_INT_GPT
#define MXC_TCTL 0x00
#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN)
#define TCTL_CLK_IPG (1<<6)
#define TCTL_FRR (1<<9)
#define TCTL_WAITEN (1<<3)
#define MXC_TPRER 0x04
#define MXC_TSTAT 0x08
#define TSTAT_OF1 (1<<0)
#define TSTAT_OF2 (1<<1)
#define TSTAT_OF3 (1<<2)
#define TSTAT_IF1 (1<<3)
#define TSTAT_IF2 (1<<4)
#define TSTAT_ROV (1<<5)
#define MXC_IR 0x0c
#define MXC_TCMP 0x10
#define MXC_TCMP2 0x14
#define MXC_TCMP3 0x18
#define MXC_TCR 0x1c
#define MXC_TCN 0x24
static inline void gpt_irq_disable(void)
{
__raw_writel(0, TIMER_BASE + MXC_IR);
}
static inline void gpt_irq_enable(void)
{
__raw_writel(1<<0, TIMER_BASE + MXC_IR);
}
static inline void gpt_irq_acknowledge(void)
{
__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
}
#endif /* CONFIG_ARCH_MX3 */
#define TCTL_SWR (1<<15)
#define TCTL_CC (1<<10)
#define TCTL_OM (1<<9)
#define TCTL_CAP_RIS (1<<6)
#define TCTL_CAP_FAL (2<<6)
#define TCTL_CAP_RIS_FAL (3<<6)
#define TCTL_CAP_ENA (1<<5)
#define TCTL_TEN (1<<0)
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册