提交 c47dda7d 编写于 作者: T Tomoya MORINAGA 提交者: Greg Kroah-Hartman

pch_phub: add new device ML7213

Add ML7213 device information.
ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment).
ML7213 is completely compatible for Intel EG20T PCH.
Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 d66ecccd
......@@ -441,7 +441,7 @@ config BMP085
module will be called bmp085.
config PCH_PHUB
tristate "PCH Packet Hub of Intel Topcliff"
tristate "PCH Packet Hub of Intel Topcliff / OKI SEMICONDUCTOR ML7213"
depends on PCI
help
This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
......@@ -449,6 +449,11 @@ config PCH_PHUB
processor. The Topcliff has MAC address and Option ROM data in SROM.
This driver can access MAC address and Option ROM data in SROM.
This driver also can be used for OKI SEMICONDUCTOR's ML7213 which is
for IVI(In-Vehicle Infotainment) use.
ML7213 is companion chip for Intel Atom E6xx series.
ML7213 is completely compatible for Intel EG20T PCH.
To compile this driver as a module, choose M here: the module will
be called pch_phub.
......
/*
* Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
* Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -33,7 +33,12 @@
#define PHUB_TIMEOUT 0x05 /* Time out value for Status Register */
#define PCH_PHUB_ROM_WRITE_ENABLE 0x01 /* Enabling for writing ROM */
#define PCH_PHUB_ROM_WRITE_DISABLE 0x00 /* Disabling for writing ROM */
#define PCH_PHUB_ROM_START_ADDR 0x14 /* ROM data area start address offset */
#define PCH_PHUB_MAC_START_ADDR 0x20C /* MAC data area start address offset */
#define PCH_PHUB_ROM_START_ADDR_EG20T 0x14 /* ROM data area start address offset
(Intel EG20T PCH)*/
#define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address
offset(OKI SEMICONDUCTOR ML7213)
*/
/* MAX number of INT_REDUCE_CONTROL registers */
#define MAX_NUM_INT_REDUCE_CONTROL_REG 128
......@@ -42,6 +47,10 @@
#define CLKCFG_CAN_50MHZ 0x12000000
#define CLKCFG_CANCLK_MASK 0xFF000000
/* Macros for ML7213 */
#define PCI_VENDOR_ID_ROHM 0x10db
#define PCI_DEVICE_ID_ROHM_ML7213_PHUB 0x801A
/* SROM ACCESS Macro */
#define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
......@@ -298,7 +307,7 @@ static void pch_phub_read_serial_rom_val(struct pch_phub_reg *chip,
{
unsigned int mem_addr;
mem_addr = PCH_PHUB_ROM_START_ADDR +
mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
pch_phub_mac_offset[offset_address];
pch_phub_read_serial_rom(chip, mem_addr, data);
......@@ -315,7 +324,7 @@ static int pch_phub_write_serial_rom_val(struct pch_phub_reg *chip,
int retval;
unsigned int mem_addr;
mem_addr = PCH_PHUB_ROM_START_ADDR +
mem_addr = PCH_PHUB_ROM_START_ADDR_EG20T +
pch_phub_mac_offset[offset_address];
retval = pch_phub_write_serial_rom(chip, mem_addr, data);
......@@ -594,23 +603,38 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
"pch_phub_extrom_base_address variable is %p\n", __func__,
chip->pch_phub_extrom_base_address);
pci_set_drvdata(pdev, chip);
retval = sysfs_create_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
if (retval)
goto err_sysfs_create;
retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
if (retval)
goto exit_bin_attr;
pch_phub_read_modify_write_reg(chip, (unsigned int)CLKCFG_REG_OFFSET,
CLKCFG_CAN_50MHZ, CLKCFG_CANCLK_MASK);
if (id->driver_data == 1) {
retval = sysfs_create_file(&pdev->dev.kobj,
&dev_attr_pch_mac.attr);
if (retval)
goto err_sysfs_create;
/* set the prefech value */
iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
/* set the interrupt delay value */
iowrite32(0x25, chip->pch_phub_base_address + 0x44);
retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
if (retval)
goto exit_bin_attr;
pch_phub_read_modify_write_reg(chip,
(unsigned int)CLKCFG_REG_OFFSET,
CLKCFG_CAN_50MHZ,
CLKCFG_CANCLK_MASK);
/* set the prefech value */
iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
/* set the interrupt delay value */
iowrite32(0x25, chip->pch_phub_base_address + 0x44);
} else if (id->driver_data == 2) {
retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
if (retval)
goto err_sysfs_create;
/* set the prefech value
* Device2(USB OHCI #1/ USB EHCI #1/ USB Device):a
* Device4(SDIO #0,1,2):f
* Device6(SATA 2):f
* Device8(USB OHCI #0/ USB EHCI #0):a
*/
iowrite32(0x000affa0, chip->pch_phub_base_address + 0x14);
}
pci_set_drvdata(pdev, chip);
return 0;
exit_bin_attr:
......@@ -687,8 +711,9 @@ static int pch_phub_resume(struct pci_dev *pdev)
#endif /* CONFIG_PM */
static struct pci_device_id pch_phub_pcidev_id[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH1_PHUB)},
{0,}
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH1_PHUB), 1, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, },
{ }
};
static struct pci_driver pch_phub_driver = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册