ath9k: Calculate ampdu limit using a helper

Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ath9k.h

@@ -461,6 +461,7 @@ void ath9k_stop_btcoex(struct ath_softc *sc);
 void ath9k_btcoex_timer_resume(struct ath_softc *sc);
 void ath9k_btcoex_timer_pause(struct ath_softc *sc);
 void ath9k_btcoex_handle_interrupt(struct ath_softc *sc, u32 status);
+u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen);
 
 /********************/
 /*   LED Control    */

drivers/net/wireless/ath/ath9k/gpio.c

@@ -318,6 +318,20 @@ void ath9k_btcoex_timer_pause(struct ath_softc *sc)
 	btcoex->hw_timer_enabled = false;
 }
 
+u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen)
+{
+	struct ath_mci_profile *mci = &sc->btcoex.mci;
+	u16 aggr_limit = 0;
+
+	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_MCI) && mci->aggr_limit)
+		aggr_limit = (max_4ms_framelen * mci->aggr_limit) >> 4;
+	else if (sc->sc_flags & SC_OP_BT_PRIORITY_DETECTED)
+		aggr_limit = min((max_4ms_framelen * 3) / 8,
+				 (u32)ATH_AMPDU_LIMIT_MAX);
+
+	return aggr_limit;
+}
+
 void ath9k_btcoex_handle_interrupt(struct ath_softc *sc, u32 status)
 {
 	struct ath_hw *ah = sc->sc_ah;

drivers/net/wireless/ath/ath9k/xmit.c

@@ -647,9 +647,8 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *tx_info;
 	struct ieee80211_tx_rate *rates;
-	struct ath_mci_profile *mci = &sc->btcoex.mci;
 	u32 max_4ms_framelen, frmlen;
-	u16 aggr_limit, legacy = 0;
+	u16 aggr_limit, bt_aggr_limit, legacy = 0;
 	int i;
 
 	skb = bf->bf_mpdu;
@@ -694,14 +693,14 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 	if (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE || legacy)
 		return 0;
 
-	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_MCI) && mci->aggr_limit)
-		aggr_limit = (max_4ms_framelen * mci->aggr_limit) >> 4;
-	else if (sc->sc_flags & SC_OP_BT_PRIORITY_DETECTED)
-		aggr_limit = min((max_4ms_framelen * 3) / 8,
-				 (u32)ATH_AMPDU_LIMIT_MAX);
-	else
-		aggr_limit = min(max_4ms_framelen,
-				 (u32)ATH_AMPDU_LIMIT_MAX);
+	aggr_limit = min(max_4ms_framelen, (u32)ATH_AMPDU_LIMIT_MAX);
+
+	/*
+	 * Override the default aggregation limit for BTCOEX.
+	 */
+	bt_aggr_limit = ath9k_btcoex_aggr_limit(sc, max_4ms_framelen);
+	if (bt_aggr_limit)
+		aggr_limit = bt_aggr_limit;
 
 	/*
 	 * h/w can accept aggregates up to 16 bit lengths (65535).