drm/i915: handle DDI-related assertions

Prevent bogus asserts on DDI-related paths.

Longer explanation from Eugeni by mail:

"For the asserts there are 3 paths where we hit them:
- in assert_fdi_tx (we don't have the FDI_TX_CTL anymore, backup plan
  DDI_FUNC_CTL is used instead)
- in assert_fdi_tx_pll_enabled (we have the combination of iCLKIP and
  DDI_FUNC_CTL, plus PORT_CLK_SEL and PIPE_CLK_SEL now to make things
  work). We could use an assert here indeed - if we configure port to
  use one clock, and pipe to use another, everything hangs. Right now,
  we configure all of them in one place only; but yes, when DP code
  lands it will get more funky.
- and in ironlake_fdi_pll_enable. I reuse part of this function (to
  configure the TU sizes), but as in the 1st case, FDI_TX_CTL is gone
  so I just ignore it here."
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: Pasted Eugeni's explanation into the commit message.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_display.c

@@ -953,9 +953,16 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
 	u32 val;
 	bool cur_state;
 
-	reg = FDI_TX_CTL(pipe);
-	val = I915_READ(reg);
-	cur_state = !!(val & FDI_TX_ENABLE);
+	if (IS_HASWELL(dev_priv->dev)) {
+		/* On Haswell, DDI is used instead of FDI_TX_CTL */
+		reg = DDI_FUNC_CTL(pipe);
+		val = I915_READ(reg);
+		cur_state = !!(val & PIPE_DDI_FUNC_ENABLE);
+	} else {
+		reg = FDI_TX_CTL(pipe);
+		val = I915_READ(reg);
+		cur_state = !!(val & FDI_TX_ENABLE);
+	}
 	WARN(cur_state != state,
 	     "FDI TX state assertion failure (expected %s, current %s)\n",
 	     state_string(state), state_string(cur_state));
@@ -990,6 +997,10 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
 	if (dev_priv->info->gen == 5)
 		return;
 
+	/* On Haswell, DDI ports are responsible for the FDI PLL setup */
+	if (IS_HASWELL(dev_priv->dev))
+		return;
+
 	reg = FDI_TX_CTL(pipe);
 	val = I915_READ(reg);
 	WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
@@ -2514,14 +2525,18 @@ static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
 	POSTING_READ(reg);
 	udelay(200);
 
-	/* Enable CPU FDI TX PLL, always on for Ironlake */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
-		I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
+	/* On Haswell, the PLL configuration for ports and pipes is handled
+	 * separately, as part of DDI setup */
+	if (!IS_HASWELL(dev)) {
+		/* Enable CPU FDI TX PLL, always on for Ironlake */
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+			I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
 
-		POSTING_READ(reg);
-		udelay(100);
+			POSTING_READ(reg);
+			udelay(100);
+		}
 	}
 }