提交 bf225f20 编写于 作者: C Chris Wilson 提交者: Daniel Vetter

drm/i915: Move RPS evaluation interval counters to i915->rps

Place the RPS counters inside the RPS struct.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 755f68f4
......@@ -902,10 +902,10 @@ struct vlv_s0ix_state {
u32 clock_gate_dis2;
};
struct intel_rps_ei_calc {
u32 cz_ts_ei;
u32 render_ei_c0;
u32 media_ei_c0;
struct intel_rps_ei {
u32 cz_clock;
u32 render_c0;
u32 media_c0;
};
struct intel_gen6_power_mgmt {
......@@ -940,6 +940,9 @@ struct intel_gen6_power_mgmt {
bool enabled;
struct delayed_work delayed_resume_work;
/* manual wa residency calculations */
struct intel_rps_ei up_ei, down_ei;
/*
* Protects RPS/RC6 register access and PCU communication.
* Must be taken after struct_mutex if nested.
......@@ -1534,13 +1537,6 @@ struct drm_i915_private {
/* gen6+ rps state */
struct intel_gen6_power_mgmt rps;
/* rps wa up ei calculation */
struct intel_rps_ei_calc rps_up_ei;
/* rps wa down ei calculation */
struct intel_rps_ei_calc rps_down_ei;
/* ilk-only ips/rps state. Everything in here is protected by the global
* mchdev_lock in intel_pm.c */
struct intel_ilk_power_mgmt ips;
......
......@@ -1273,7 +1273,7 @@ static void notify_ring(struct drm_device *dev,
}
static u32 vlv_c0_residency(struct drm_i915_private *dev_priv,
struct intel_rps_ei_calc *rps_ei)
struct intel_rps_ei *rps_ei)
{
u32 cz_ts, cz_freq_khz;
u32 render_count, media_count;
......@@ -1286,22 +1286,22 @@ static u32 vlv_c0_residency(struct drm_i915_private *dev_priv,
render_count = I915_READ(VLV_RENDER_C0_COUNT_REG);
media_count = I915_READ(VLV_MEDIA_C0_COUNT_REG);
if (rps_ei->cz_ts_ei == 0) {
rps_ei->cz_ts_ei = cz_ts;
rps_ei->render_ei_c0 = render_count;
rps_ei->media_ei_c0 = media_count;
if (rps_ei->cz_clock == 0) {
rps_ei->cz_clock = cz_ts;
rps_ei->render_c0 = render_count;
rps_ei->media_c0 = media_count;
return dev_priv->rps.cur_freq;
}
elapsed_time = cz_ts - rps_ei->cz_ts_ei;
rps_ei->cz_ts_ei = cz_ts;
elapsed_time = cz_ts - rps_ei->cz_clock;
rps_ei->cz_clock = cz_ts;
elapsed_render = render_count - rps_ei->render_ei_c0;
rps_ei->render_ei_c0 = render_count;
elapsed_render = render_count - rps_ei->render_c0;
rps_ei->render_c0 = render_count;
elapsed_media = media_count - rps_ei->media_ei_c0;
rps_ei->media_ei_c0 = media_count;
elapsed_media = media_count - rps_ei->media_c0;
rps_ei->media_c0 = media_count;
/* Convert all the counters into common unit of milli sec */
elapsed_time /= VLV_CZ_CLOCK_TO_MILLI_SEC;
......@@ -1337,9 +1337,9 @@ static u32 vlv_calc_delay_from_C0_counters(struct drm_i915_private *dev_priv)
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
if (dev_priv->rps_up_ei.cz_ts_ei == 0) {
vlv_c0_residency(dev_priv, &dev_priv->rps_up_ei);
vlv_c0_residency(dev_priv, &dev_priv->rps_down_ei);
if (dev_priv->rps.up_ei.cz_clock == 0) {
vlv_c0_residency(dev_priv, &dev_priv->rps.up_ei);
vlv_c0_residency(dev_priv, &dev_priv->rps.down_ei);
return dev_priv->rps.cur_freq;
}
......@@ -1354,10 +1354,10 @@ static u32 vlv_calc_delay_from_C0_counters(struct drm_i915_private *dev_priv)
dev_priv->rps.ei_interrupt_count = 0;
residency_C0_down = vlv_c0_residency(dev_priv,
&dev_priv->rps_down_ei);
&dev_priv->rps.down_ei);
} else {
residency_C0_up = vlv_c0_residency(dev_priv,
&dev_priv->rps_up_ei);
&dev_priv->rps.up_ei);
}
new_delay = dev_priv->rps.cur_freq;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册