提交 bf08611b 编写于 作者: J James Smart 提交者: James Bottomley

[SCSI] lpfc 8.3.26: Fix issues pertaining to SCSI/FC protocol.

Fix issues pertaining to SCSI/FC protocol.

- Allow frames destined to 0xFFFFFE to be processed by the driver by matching
  that DID with the physical port.
- Call lpfc_sli_issue_iocb with context1 set to ndlp
- In echo command accept function, adjust memcpy to limit memcpy to 1K
- Set LPFC_SLI3_BG_ENABLED properly upon completion.
- Skip the INIT_VFI call in lpfc_register_fcf if the FCF is already
  registered and go immediately to initial flogi.
- use "status" variable instead of "ret" variable to hold the return of the
  fc_block_scsi_eh.
Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
上级 8dce69ff
......@@ -4082,9 +4082,6 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
lpfc_nlp_put(ndlp);
elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
* it could be freed */
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
......@@ -4166,6 +4163,11 @@ lpfc_els_rsp_echo_acc(struct lpfc_vport *vport, uint8_t *data,
psli = &phba->sli;
cmdsize = oldiocb->iocb.unsli3.rcvsli3.acc_len;
/* The accumulated length can exceed the BPL_SIZE. For
* now, use this as the limit
*/
if (cmdsize > LPFC_BPL_SIZE)
cmdsize = LPFC_BPL_SIZE;
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
ndlp->nlp_DID, ELS_CMD_ACC);
if (!elsiocb)
......@@ -4189,9 +4191,6 @@ lpfc_els_rsp_echo_acc(struct lpfc_vport *vport, uint8_t *data,
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
lpfc_nlp_put(ndlp);
elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
* it could be freed */
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
......
......@@ -1412,7 +1412,7 @@ lpfc_register_fcf(struct lpfc_hba *phba)
if (phba->pport->port_state != LPFC_FLOGI) {
phba->hba_flag |= FCF_RR_INPROG;
spin_unlock_irq(&phba->hbalock);
lpfc_issue_init_vfi(phba->pport);
lpfc_initial_flogi(phba->pport);
return;
}
spin_unlock_irq(&phba->hbalock);
......
......@@ -3056,8 +3056,9 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
}
ndlp = rdata->pnode;
if (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) &&
(!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) ||
(phba->sli_rev == LPFC_SLI_REV4))) {
lpfc_printf_log(phba, KERN_ERR, LOG_BG,
"9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
......@@ -3691,9 +3692,9 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
ret = fc_block_scsi_eh(cmnd);
if (ret)
return ret;
status = fc_block_scsi_eh(cmnd);
if (status)
return status;
/*
* Since the driver manages a single bus device, reset all
......
......@@ -5818,9 +5818,13 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
* then turn off the global config parameters to disable the
* feature in the driver. This is not a fatal error.
*/
if ((phba->cfg_enable_bg) &&
!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
ftr_rsp++;
phba->sli3_options &= ~LPFC_SLI3_BG_ENABLED;
if (phba->cfg_enable_bg) {
if (bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs))
phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
else
ftr_rsp++;
}
if (phba->max_vpi && phba->cfg_enable_npiv &&
!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
......@@ -13296,7 +13300,8 @@ lpfc_fc_frame_to_vport(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr,
uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
fc_hdr->fh_d_id[1] << 8 |
fc_hdr->fh_d_id[2]);
if (did == Fabric_DID)
return phba->pport;
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册