提交 bc59d280 编写于 作者: T Thomas Gleixner 提交者: Linus Torvalds

[PATCH] irq-flags: PPC: Use the new IRQF_ constants

Use the new IRQF_ constants and remove the SA_INTERRUPT define
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 6714465e
......@@ -2116,7 +2116,7 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
#ifdef PHY_INTERRUPT
#ifdef CONFIG_ADS8272
if (request_irq(PHY_INTERRUPT, mii_link_interrupt, SA_SHIRQ,
if (request_irq(PHY_INTERRUPT, mii_link_interrupt, IRQF_SHARED,
"mii", dev) < 0)
printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
#else
......
......@@ -131,7 +131,7 @@ static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction cpm2_irqaction = {
.handler = cpm2_cascade,
.flags = SA_INTERRUPT,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "cpm2_cascade",
};
......
......@@ -136,7 +136,7 @@ static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction cpm2_irqaction = {
.handler = cpm2_cascade,
.flags = SA_INTERRUPT,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "cpm2_cascade",
};
......
......@@ -166,7 +166,7 @@ static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction cpm2_irqaction = {
.handler = cpm2_cascade,
.flags = SA_INTERRUPT,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "cpm2_cascade",
};
......
......@@ -190,7 +190,7 @@ static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction cpm2_irqaction = {
.handler = cpm2_cascade,
.flags = SA_INTERRUPT,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "cpm2_cascade",
};
......
......@@ -837,7 +837,7 @@ static void smp_hdpu_setup_cpu(int cpu_nr)
mv64x60_write(&bh, MV64360_CPU0_DOORBELL_CLR, 0xff);
mv64x60_write(&bh, MV64360_CPU0_DOORBELL_MASK, 0xff);
request_irq(60, hdpu_smp_cpu0_int_handler,
SA_INTERRUPT, hdpu_smp0, 0);
IRQF_DISABLED, hdpu_smp0, 0);
}
if (cpu_nr == 1) {
......@@ -857,7 +857,7 @@ static void smp_hdpu_setup_cpu(int cpu_nr)
mv64x60_write(&bh, MV64360_CPU1_DOORBELL_CLR, 0x0);
mv64x60_write(&bh, MV64360_CPU1_DOORBELL_MASK, 0xff);
request_irq(28, hdpu_smp_cpu1_int_handler,
SA_INTERRUPT, hdpu_smp1, 0);
IRQF_DISABLED, hdpu_smp1, 0);
}
}
......
......@@ -1310,7 +1310,7 @@ static void ppc7d_init2(void)
/* Hook up i8259 interrupt which is connected to GPP28 */
request_irq(mv64360_irq_base + MV64x60_IRQ_GPP28, ppc7d_i8259_intr,
SA_INTERRUPT, "I8259 (GPP28) interrupt", (void *)0);
IRQF_DISABLED, "I8259 (GPP28) interrupt", (void *)0);
/* Configure MPP16 as watchdog NMI, MPP17 as watchdog WDE */
spin_lock_irqsave(&mv64x60_lock, flags);
......
......@@ -145,7 +145,7 @@ static irqreturn_t sbc82xx_i8259_demux(int irq, void *dev_id, struct pt_regs *re
static struct irqaction sbc82xx_i8259_irqaction = {
.handler = sbc82xx_i8259_demux,
.flags = SA_INTERRUPT,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "i8259 demux",
};
......
......@@ -297,7 +297,7 @@ gt64260_register_hdlrs(void)
/* Register CPU interface error interrupt handler */
if ((rc = request_irq(MV64x60_IRQ_CPU_ERR,
gt64260_cpu_error_int_handler, SA_INTERRUPT, CPU_INTR_STR, 0)))
gt64260_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, 0)))
printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
......@@ -305,7 +305,7 @@ gt64260_register_hdlrs(void)
/* Register PCI 0 error interrupt handler */
if ((rc = request_irq(MV64360_IRQ_PCI0, gt64260_pci_error_int_handler,
SA_INTERRUPT, PCI0_INTR_STR, (void *)0)))
IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
printk(KERN_WARNING "Can't register pci 0 error handler: %d",
rc);
......@@ -314,7 +314,7 @@ gt64260_register_hdlrs(void)
/* Register PCI 1 error interrupt handler */
if ((rc = request_irq(MV64360_IRQ_PCI1, gt64260_pci_error_int_handler,
SA_INTERRUPT, PCI1_INTR_STR, (void *)1)))
IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
printk(KERN_WARNING "Can't register pci 1 error handler: %d",
rc);
......
......@@ -149,7 +149,7 @@ void __init ibm440gx_l2c_enable(void){
unsigned long flags;
/* Install error handler */
if (request_irq(87, l2c_error_handler, SA_INTERRUPT, "L2C", 0) < 0){
if (request_irq(87, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0){
printk(KERN_ERR "Cannot install L2C error handler, cache is not enabled\n");
return;
}
......
......@@ -139,7 +139,7 @@ pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs)
static struct irqaction pq2pci_irqaction = {
.handler = pq2pci_irq_demux,
.flags = SA_INTERRUPT,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "PQ2 PCI cascade",
};
......
......@@ -380,7 +380,7 @@ mv64360_register_hdlrs(void)
/* Clear old errors and register CPU interface error intr handler */
mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
if ((rc = request_irq(MV64x60_IRQ_CPU_ERR + mv64360_irq_base,
mv64360_cpu_error_int_handler, SA_INTERRUPT, CPU_INTR_STR, 0)))
mv64360_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, 0)))
printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
......@@ -389,14 +389,14 @@ mv64360_register_hdlrs(void)
/* Clear old errors and register internal SRAM error intr handler */
mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
if ((rc = request_irq(MV64360_IRQ_SRAM_PAR_ERR + mv64360_irq_base,
mv64360_sram_error_int_handler,SA_INTERRUPT,SRAM_INTR_STR, 0)))
mv64360_sram_error_int_handler,IRQF_DISABLED,SRAM_INTR_STR, 0)))
printk(KERN_WARNING "Can't register SRAM error handler: %d",rc);
/* Clear old errors and register PCI 0 error intr handler */
mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, 0);
if ((rc = request_irq(MV64360_IRQ_PCI0 + mv64360_irq_base,
mv64360_pci_error_int_handler,
SA_INTERRUPT, PCI0_INTR_STR, (void *)0)))
IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
printk(KERN_WARNING "Can't register pci 0 error handler: %d",
rc);
......@@ -411,7 +411,7 @@ mv64360_register_hdlrs(void)
mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, 0);
if ((rc = request_irq(MV64360_IRQ_PCI1 + mv64360_irq_base,
mv64360_pci_error_int_handler,
SA_INTERRUPT, PCI1_INTR_STR, (void *)1)))
IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
printk(KERN_WARNING "Can't register pci 1 error handler: %d",
rc);
......
......@@ -575,18 +575,21 @@ void openpic_request_IPIs(void)
if (OpenPIC == NULL)
return;
/* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */
/*
* IPIs are marked IRQF_DISABLED as they must run with irqs
* disabled
*/
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
openpic_ipi_action, SA_INTERRUPT,
openpic_ipi_action, IRQF_DISABLED,
"IPI0 (call function)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
openpic_ipi_action, SA_INTERRUPT,
openpic_ipi_action, IRQF_DISABLED,
"IPI1 (reschedule)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
openpic_ipi_action, SA_INTERRUPT,
openpic_ipi_action, IRQF_DISABLED,
"IPI2 (invalidate tlb)", NULL);
request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
openpic_ipi_action, SA_INTERRUPT,
openpic_ipi_action, IRQF_DISABLED,
"IPI3 (xmon break)", NULL);
for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
......@@ -691,7 +694,7 @@ openpic_init_nmi_irq(u_int irq)
static struct irqaction openpic_cascade_irqaction = {
.handler = no_action,
.flags = SA_INTERRUPT,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
};
......
......@@ -96,11 +96,11 @@ static int vdma_get_dma_residue(unsigned int dummy)
static int fd_request_irq(void)
{
if (can_use_virtual_dma)
return request_irq(FLOPPY_IRQ, floppy_hardint,SA_INTERRUPT,
"floppy", NULL);
return request_irq(FLOPPY_IRQ, floppy_hardint,
IRQF_DISABLED, "floppy", NULL);
else
return request_irq(FLOPPY_IRQ, floppy_interrupt, SA_INTERRUPT,
"floppy", NULL);
return request_irq(FLOPPY_IRQ, floppy_interrupt,
IRQF_DISABLED, "floppy", NULL);
}
static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册