提交 b6aef071 编写于 作者: M Michael Krufky 提交者: Linus Torvalds

[PATCH] dvb/v4l: lgdt3302: isolate tuner

Remove the dvb_pll_desc from the frontend and replace with a
pll_set-callback to isolate the tuner programming from the frontend.
Signed-off-by: NMac Michaels <wmichaels1@earthlink.net>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 7fd0f3ac
......@@ -74,11 +74,14 @@ static int i2c_writebytes (struct lgdt3302_state* state,
u8 *buf, /* data bytes to send */
int len /* number of bytes to send */ )
{
if (addr == state->config->pll_address) {
struct i2c_msg msg =
{ .addr = addr, .flags = 0, .buf = buf, .len = len };
int err;
u8 tmp[] = { buf[0], buf[1] };
struct i2c_msg msg =
{ .addr = addr, .flags = 0, .buf = tmp, .len = 2 };
int err;
int i;
for (i=1; i<len; i++) {
tmp[1] = buf[i];
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
if (err < 0)
......@@ -86,27 +89,11 @@ static int i2c_writebytes (struct lgdt3302_state* state,
else
return -EREMOTEIO;
}
} else {
u8 tmp[] = { buf[0], buf[1] };
struct i2c_msg msg =
{ .addr = addr, .flags = 0, .buf = tmp, .len = 2 };
int err;
int i;
for (i=1; i<len; i++) {
tmp[1] = buf[i];
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
tmp[0]++;
}
tmp[0]++;
}
return 0;
}
static int i2c_readbytes (struct lgdt3302_state* state,
u8 addr, /* demod_address or pll_address */
u8 *buf, /* holds data bytes read */
......@@ -207,7 +194,6 @@ static int lgdt3302_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
static int lgdt3302_set_parameters(struct dvb_frontend* fe,
struct dvb_frontend_parameters *param)
{
u8 buf[4];
struct lgdt3302_state* state =
(struct lgdt3302_state*) fe->demodulator_priv;
......@@ -290,16 +276,30 @@ static int lgdt3302_set_parameters(struct dvb_frontend* fe,
/* Change only if we are actually changing the channel */
if (state->current_frequency != param->frequency) {
dvb_pll_configure(state->config->pll_desc, buf,
param->frequency, 0);
dprintk("%s: tuner bytes: 0x%02x 0x%02x "
"0x%02x 0x%02x\n", __FUNCTION__, buf[0],buf[1],buf[2],buf[3]);
i2c_writebytes(state, state->config->pll_address ,buf, 4);
u8 buf[5];
/* Check the status of the tuner pll */
i2c_readbytes(state, state->config->pll_address, buf, 1);
dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
/* This must be done before the initialized msg is declared */
state->config->pll_set(fe, param, buf);
struct i2c_msg msg =
{ .addr = buf[0], .flags = 0, .buf = &buf[1], .len = 4 };
int err;
dprintk("%s: tuner at 0x%02x bytes: 0x%02x 0x%02x "
"0x%02x 0x%02x\n", __FUNCTION__,
buf[0],buf[1],buf[2],buf[3],buf[4]);
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err = %i)\n", __FUNCTION__, buf[0], buf[1], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
#if 0
/* Check the status of the tuner pll */
i2c_readbytes(state, buf[0], &buf[1], 1);
dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[1]);
#endif
/* Update current frequency */
state->current_frequency = param->frequency;
}
......@@ -322,12 +322,6 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
*status = 0; /* Reset status result */
/* Check the status of the tuner pll */
i2c_readbytes(state, state->config->pll_address, buf, 1);
dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]);
if ((buf[0] & 0xc0) != 0x40)
return 0; /* Tuner PLL not locked or not powered on */
/*
* You must set the Mask bits to 1 in the IRQ_MASK in order
* to see that status bit in the IRQ_STATUS register.
......
/*
* $Id: lgdt3302.h,v 1.2 2005/06/28 23:50:48 mkrufky Exp $
*
* Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM
*
* Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
......@@ -30,8 +28,9 @@ struct lgdt3302_config
{
/* The demodulator's i2c address */
u8 demod_address;
u8 pll_address;
struct dvb_pll_desc *pll_desc;
/* PLL interface */
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pll_address);
/* Need to set device param for start_dma */
int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
......
/*
* $Id: cx88-dvb.c,v 1.42 2005/07/12 15:44:55 mkrufky Exp $
* $Id: cx88-dvb.c,v 1.47 2005/07/20 05:20:37 mkrufky Exp $
*
* device driver for Conexant 2388x based TV cards
* MPEG Transport Stream (DVB) routines
......@@ -211,6 +211,18 @@ static struct or51132_config pchdtv_hd3000 = {
#endif
#if CONFIG_DVB_LGDT3302
static int lgdt3302_pll_set(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
struct cx8802_dev *dev= fe->dvb->priv;
pllbuf[0] = dev->core->pll_addr;
dvb_pll_configure(dev->core->pll_desc, &pllbuf[1],
params->frequency, 0);
return 0;
}
static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured)
{
struct cx8802_dev *dev= fe->dvb->priv;
......@@ -221,17 +233,9 @@ static int lgdt3302_set_ts_param(struct dvb_frontend* fe, int is_punctured)
return 0;
}
static struct lgdt3302_config fusionhdtv_3_gold_q = {
.demod_address = 0x0e,
.pll_address = 0x61,
.pll_desc = &dvb_pll_microtune_4042,
.set_ts_params = lgdt3302_set_ts_param,
};
static struct lgdt3302_config fusionhdtv_3_gold_t = {
static struct lgdt3302_config fusionhdtv_3_gold = {
.demod_address = 0x0e,
.pll_address = 0x61,
.pll_desc = &dvb_pll_thomson_dtt7611,
.pll_set = lgdt3302_pll_set,
.set_ts_params = lgdt3302_set_ts_param,
};
#endif
......@@ -294,7 +298,9 @@ static int dvb_register(struct cx8802_dev *dev)
mdelay(100);
cx_set(MO_GP0_IO, 9); // ANT connector too FIXME
mdelay(200);
dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold_q,
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_microtune_4042;
dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold,
&dev->core->i2c_adap);
}
break;
......@@ -308,7 +314,9 @@ static int dvb_register(struct cx8802_dev *dev)
mdelay(100);
cx_set(MO_GP0_IO, 9); /* ANT connector too FIXME */
mdelay(200);
dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold_t,
dev->core->pll_addr = 0x61;
dev->core->pll_desc = &dvb_pll_thomson_dtt7611;
dev->dvb.frontend = lgdt3302_attach(&fusionhdtv_3_gold,
&dev->core->i2c_adap);
}
break;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册