提交 b4126e86 编写于 作者: Y Yoichi Yuasa 提交者: Ralf Baechle

[MIPS] Cobalt: Move PCI definitions to arch/mips/pci/fixup-cobalt.c.

These PCI definitions are only used in arch/mips/pci/fixup-cobalt.c.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 b1df86d6
......@@ -20,6 +20,23 @@
#include <cobalt.h>
#include <irq.h>
/*
* PCI slot numbers
*/
#define COBALT_PCICONF_CPU 0x06
#define COBALT_PCICONF_ETH0 0x07
#define COBALT_PCICONF_RAQSCSI 0x08
#define COBALT_PCICONF_VIA 0x09
#define COBALT_PCICONF_PCISLOT 0x0A
#define COBALT_PCICONF_ETH1 0x0C
/*
* The Cobalt board ID information. The boards have an ID number wired
* into the VIA that is available in the high nibble of register 94.
*/
#define VIA_COBALT_BRD_ID_REG 0x94
#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char)(reg) >> 4)
static void qube_raq_galileo_early_fixup(struct pci_dev *dev)
{
if (dev->devfn == PCI_DEVFN(0, 0) &&
......
......@@ -13,37 +13,15 @@
#define __ASM_COBALT_H
/*
* PCI configuration space manifest constants. These are wired into
* the board layout according to the PCI spec to enable the software
* to probe the hardware configuration space in a well defined manner.
*
* The PCI_DEVSHFT() macro transforms these values into numbers
* suitable for passing as the dev parameter to the various
* pcibios_read/write_config routines.
* The Cobalt board ID information.
*/
#define COBALT_PCICONF_CPU 0x06
#define COBALT_PCICONF_ETH0 0x07
#define COBALT_PCICONF_RAQSCSI 0x08
#define COBALT_PCICONF_VIA 0x09
#define COBALT_PCICONF_PCISLOT 0x0A
#define COBALT_PCICONF_ETH1 0x0C
extern int cobalt_board_id;
/*
* The Cobalt board id information. The boards have an ID number wired
* into the VIA that is available in the high nibble of register 94.
* This register is available in the VIA configuration space through the
* interface routines qube_pcibios_read/write_config. See cobalt/pci.c
*/
#define VIA_COBALT_BRD_ID_REG 0x94
#define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char) (reg) >> 4)
#define COBALT_BRD_ID_QUBE1 0x3
#define COBALT_BRD_ID_RAQ1 0x4
#define COBALT_BRD_ID_QUBE2 0x5
#define COBALT_BRD_ID_RAQ2 0x6
extern int cobalt_board_id;
#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */
# define COBALT_LED_BAR_RIGHT (1 << 1) /* Qube */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册