提交 adb5066a 编写于 作者: F Felix Fietkau 提交者: John W. Linville

ath9k_hw: do not apply the 2.4 ghz ack timeout workaround to cts

It is only used to workaround interoperability issues related to longer
delays in receiving the block ack, so it is not necessary to apply it
to the CTS exchange.
Should improve throughput slightly, especially when there are lots
of retransmissions.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 2cca397f
......@@ -960,7 +960,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
const struct ath9k_channel *chan = ah->curchan;
int acktimeout;
int acktimeout, ctstimeout;
int slottime;
int sifstime;
int rx_lat = 0, tx_lat = 0, eifs = 0;
......@@ -1017,6 +1017,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
/* As defined by IEEE 802.11-2007 17.3.8.6 */
acktimeout = slottime + sifstime + 3 * ah->coverage_class;
ctstimeout = acktimeout;
/*
* Workaround for early ACK timeouts, add an offset to match the
......@@ -1031,7 +1032,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
ath9k_hw_set_sifs_time(ah, sifstime);
ath9k_hw_setslottime(ah, slottime);
ath9k_hw_set_ack_timeout(ah, acktimeout);
ath9k_hw_set_cts_timeout(ah, acktimeout);
ath9k_hw_set_cts_timeout(ah, ctstimeout);
if (ah->globaltxtimeout != (u32) -1)
ath9k_hw_set_global_txtimeout(ah, ah->globaltxtimeout);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册