Merge branch 'omap-for-linus' of...

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits) omap4: Add support for i2c init omap: Fix i2c platform init code for omap4 OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y OMAP powerdomain, hwmod, omap_device: add some credits OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains OMAP: timers: Fix clock source names for OMAP4 OMAP4 clock: Support clk_set_parent OMAP4: PRCM: Add offset defines for all CM registers OMAP4: PRCM: Add offset defines for all PRM registers OMAP4: PRCM: Remove duplicate definition of base addresses OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention OMAP4: CM: Remove non-functional registers in ES1.0 OMAP: hwmod: Replace WARN by pr_warning for clockdomain check OMAP: hwmod: Rename hwmod name for the MPU OMAP: hwmod: Do not exit the iteration if one clock init failed OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value OMAP: hwmod: Fix wrong pointer iteration in oh->slaves ...

Merge branch 'omap-for-linus' of...
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits) omap4: Add support for i2c init omap: Fix i2c platform init code for omap4 OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y OMAP powerdomain, hwmod, omap_device: add some credits OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains OMAP: timers: Fix clock source names for OMAP4 OMAP4 clock: Support clk_set_parent OMAP4: PRCM: Add offset defines for all CM registers OMAP4: PRCM: Add offset defines for all PRM registers OMAP4: PRCM: Remove duplicate definition of base addresses OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention OMAP4: CM: Remove non-functional registers in ES1.0 OMAP: hwmod: Replace WARN by pr_warning for clockdomain check OMAP: hwmod: Rename hwmod name for the MPU OMAP: hwmod: Do not exit the iteration if one clock init failed OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value OMAP: hwmod: Fix wrong pointer iteration in oh->slaves ...
a6f03986 · Linus Torvalds · e0bc5d4a · f6304f58 · a6f03986 · a6f03986
103 changed file
--- a/arch/arm/configs/am3517_evm_defconfig
+++ b/arch/arm/configs/am3517_evm_defconfig
@@ -422,15 +422,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_TI_HECC=y
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+CONFIG_CAN_DEBUG_DEVICES=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set

 #
@@ -517,7 +531,75 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set


--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -47,6 +47,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+CONFIG_TREE_PREEMPT_RCU=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
@@ -95,9 +96,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set

 #
 # IO Schedulers
@@ -699,6 +699,7 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_AMS_DELTA=y
 # CONFIG_GAMEPORT is not set

 #
@@ -835,7 +836,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y

 #
 # Display device support
@@ -1283,7 +1285,7 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set

--- a/arch/arm/configs/devkit8000_defconfig
+++ b/arch/arm/configs/devkit8000_defconfig
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb  4 15:42:56 2010
+# Linux kernel version: 2.6.34-rc2
+# Wed Mar 24 13:27:25 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -19,7 +20,9 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -60,11 +63,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -96,10 +94,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y

 #
 # Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -170,7 +172,7 @@ CONFIG_INLINE_WRITE_UNLOCK=y
 CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
 # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
 # CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y

 #
 # System Type
@@ -181,6 +183,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
@@ -190,7 +193,6 @@ CONFIG_MMU=y
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -207,21 +209,26 @@ CONFIG_MMU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
 # CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set

 #
 # TI OMAP Implementations
@@ -237,16 +244,20 @@ CONFIG_ARCH_OMAP3=y
 # OMAP Feature Selections
 #
 # CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_PM_NONE is not set
 CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y

 #
 # OMAP Board Type
@@ -295,6 +306,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
@@ -387,7 +399,14 @@ CONFIG_HAVE_AOUT=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y

@@ -395,7 +414,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -666,6 +684,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -717,6 +736,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=4
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
@@ -863,6 +883,7 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -891,6 +912,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set

 #
 # External I2C/SMBus adapter drivers
@@ -904,15 +926,9 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -944,10 +960,12 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set

 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -984,10 +1002,12 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
@@ -998,22 +1018,25 @@ CONFIG_TWL4030_CODEC=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
 # CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
 # CONFIG_REGULATOR_LP3971 is not set
@@ -1072,7 +1095,6 @@ CONFIG_OMAP2_DSS_VENC=y
 CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
 CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
 CONFIG_FB_OMAP2_NUM_FBS=3

 #
@@ -1080,7 +1102,9 @@ CONFIG_FB_OMAP2_NUM_FBS=3
 #
 CONFIG_PANEL_GENERIC=y
 # CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-CONFIG_PANEL_INNOLUX_AT070TN83=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set

 #
@@ -1136,6 +1160,7 @@ CONFIG_SND_ARM=y
 CONFIG_SND_SPI=y
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
@@ -1147,42 +1172,44 @@ CONFIG_SND_SOC_TWL4030=y
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HIDRAW=y
+# CONFIG_HIDRAW is not set

 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 # CONFIG_HID_PID is not set
-CONFIG_USB_HIDDEV=y
+# CONFIG_USB_HIDDEV is not set

 #
 # Special HID drivers
 #
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
 # CONFIG_HID_DRAGONRISE is not set
-CONFIG_HID_EZKEY=y
+# CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
-CONFIG_HID_GYRATION=y
+# CONFIG_HID_GYRATION is not set
 # CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
@@ -1193,7 +1220,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

 #
@@ -1202,7 +1229,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
@@ -1230,15 +1257,15 @@ CONFIG_USB_MUSB_SOC=y
 #
 # OMAP 343x high speed USB support
 #
-CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_HOST is not set
 # CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
 CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
+CONFIG_USB_MUSB_DEBUG=y

 #
 # USB Device Class drivers
@@ -1291,7 +1318,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1304,9 +1330,8 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
@@ -1314,8 +1339,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
@@ -1330,19 +1354,20 @@ CONFIG_USB_OMAP=y
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_ETH_EEM=y
-CONFIG_USB_GADGETFS=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_MASS_STORAGE is not set
-CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
-CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set

 #
@@ -1373,8 +1398,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=m
 # CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1392,11 +1415,11 @@ CONFIG_LEDS_GPIO_PLATFORM=y
 # CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
 # CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y

 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
@@ -1580,6 +1603,7 @@ CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_LZO=y
 CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1606,6 +1630,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set

--- a/arch/arm/configs/omap3_defconfig
+++ b/arch/arm/configs/omap3_defconfig
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc5
-# Tue Jan 26 11:05:31 2010
+# Linux kernel version: 2.6.34-rc7
+# Thu May 13 10:54:43 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -19,7 +20,9 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
 CONFIG_OPROFILE_ARMV6=y
 CONFIG_OPROFILE_ARM11_CORE=y
 CONFIG_OPROFILE_ARMV7=y
@@ -63,12 +66,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
+CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -100,17 +98,21 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y

 #
 # Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -189,6 +191,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
@@ -198,7 +201,6 @@ CONFIG_MMU=y
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -215,21 +217,26 @@ CONFIG_MMU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
 # CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set

 #
 # TI OMAP Implementations
@@ -254,6 +261,7 @@ CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_PM_NONE is not set
@@ -264,7 +272,7 @@ CONFIG_MACH_OMAP_GENERIC=y
 # OMAP Core Type
 #
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
+CONFIG_ARCH_OMAP2430=y
 CONFIG_ARCH_OMAP3430=y
 CONFIG_OMAP_PACKAGE_CBB=y
 CONFIG_OMAP_PACKAGE_CUS=y
@@ -276,8 +284,9 @@ CONFIG_OMAP_PACKAGE_CBP=y
 CONFIG_MACH_OMAP2_TUSB6010=y
 CONFIG_MACH_OMAP_H4=y
 CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_MACH_OMAP_2430SDP is not set
+CONFIG_MACH_OMAP_2430SDP=y
 CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_DEVKIT8000=y
 CONFIG_MACH_OMAP_LDP=y
 CONFIG_MACH_OVERO=y
 CONFIG_MACH_OMAP3EVM=y
@@ -294,6 +303,7 @@ CONFIG_MACH_OMAP_ZOOM2=y
 CONFIG_MACH_OMAP_ZOOM3=y
 CONFIG_MACH_CM_T35=y
 CONFIG_MACH_IGEP0020=y
+CONFIG_MACH_SBC3530=y
 CONFIG_MACH_OMAP_3630SDP=y
 CONFIG_MACH_OMAP_4430SDP=y
 # CONFIG_OMAP3_EMU is not set
@@ -330,11 +340,16 @@ CONFIG_ARM_THUMBEE=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_CACHE_L2X0=y
 CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_411920 is not set
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
+# CONFIG_PL310_ERRATA_588369 is not set
 CONFIG_ARM_GIC=y
 CONFIG_COMMON_CLKDEV=y

@@ -368,6 +383,7 @@ CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -390,7 +406,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
@@ -443,7 +459,8 @@ CONFIG_BINFMT_MISC=y
 #
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+# CONFIG_PM_VERBOSE is not set
 CONFIG_CAN_PM_TRACE=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
@@ -451,6 +468,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y

@@ -458,7 +476,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
@@ -544,7 +561,6 @@ CONFIG_NETFILTER_ADVANCED=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -584,7 +600,7 @@ CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_CFG80211_DEFAULT_PS=y
 # CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
 CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
@@ -676,7 +692,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
 # CONFIG_MTD_PLATRAM is not set

 #
@@ -754,6 +769,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
@@ -773,6 +789,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -839,12 +856,14 @@ CONFIG_SMSC_PHY=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
+# CONFIG_TI_DAVINCI_EMAC is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
@@ -881,6 +900,7 @@ CONFIG_LIBERTAS_USB=y
 CONFIG_LIBERTAS_SDIO=y
 # CONFIG_LIBERTAS_SPI is not set
 CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_MESH is not set
 # CONFIG_P54_COMMON is not set
 # CONFIG_RT2X00 is not set
 # CONFIG_WL12XX is not set
@@ -902,6 +922,7 @@ CONFIG_USB_NET_AX8817X=y
 CONFIG_USB_NET_CDCETHER=y
 # CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
 # CONFIG_USB_NET_SMSC95XX is not set
 # CONFIG_USB_NET_GL620A is not set
 CONFIG_USB_NET_NET1080=y
@@ -917,6 +938,8 @@ CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 CONFIG_USB_NET_ZAURUS=y
 # CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_SIERRA_NET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -1012,6 +1035,7 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_TWL4030_VIBRA is not set
 # CONFIG_INPUT_UINPUT is not set
 # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set

@@ -1055,6 +1079,7 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -1083,6 +1108,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set

 #
 # External I2C/SMBus adapter drivers
@@ -1096,15 +1122,9 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -1136,10 +1156,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set

 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -1204,10 +1226,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -1262,7 +1285,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set

 #
 # Watchdog Device Drivers
@@ -1270,6 +1293,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
+# CONFIG_MAX63XX_WATCHDOG is not set

 #
 # USB-based Watchdog Cards
@@ -1286,14 +1310,16 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
-# CONFIG_MENELAUS is not set
+CONFIG_MENELAUS=y
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
+CONFIG_TWL4030_POWER=y
 CONFIG_TWL4030_CODEC=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
@@ -1301,27 +1327,30 @@ CONFIG_TWL4030_CODEC=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_DUMMY is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
 # CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
 # CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
 # CONFIG_MEDIA_SUPPORT is not set

 #
@@ -1333,9 +1362,9 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -1358,19 +1387,12 @@ CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
 # CONFIG_FB_BROADSHEET is not set
-CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP is not set
 CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_FB_OMAP_031M3R is not set
-# CONFIG_FB_OMAP_048M3R is not set
-CONFIG_FB_OMAP_079M3R=y
-# CONFIG_FB_OMAP_092M9R is not set
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
 # CONFIG_OMAP2_DSS is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_L4F00242T03 is not set
 # CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
@@ -1448,6 +1470,7 @@ CONFIG_SND_ARM=y
 CONFIG_SND_SPI=y
 CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
@@ -1479,6 +1502,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
@@ -1492,13 +1516,18 @@ CONFIG_USB_HID=y
 # CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MAGICMOUSE is not set
 # CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1544,6 +1573,10 @@ CONFIG_USB_MON=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_SOC=y

+#
+# OMAP 243x high speed USB support
+#
+
 #
 # OMAP 343x high speed USB support
 #
@@ -1608,7 +1641,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1621,7 +1653,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
@@ -1659,6 +1690,7 @@ CONFIG_USB_ZERO=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set

 #
@@ -1686,10 +1718,8 @@ CONFIG_SDIO_UART=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1707,11 +1737,11 @@ CONFIG_LEDS_GPIO_PLATFORM=y
 # CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
 # CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y

 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
@@ -1751,6 +1781,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL92330=y
 CONFIG_RTC_DRV_TWL4030=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
@@ -1798,6 +1829,11 @@ CONFIG_RTC_DRV_TWL4030=y
 #
 # CONFIG_STAGING is not set

+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
 #
 # File systems
 #
@@ -1826,6 +1862,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QUOTA_NETLINK_INTERFACE is not set
 CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
 CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
@@ -1897,6 +1934,7 @@ CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_LZO=y
 CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1924,6 +1962,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -2024,6 +2063,7 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
 CONFIG_LOCKDEP=y
 CONFIG_LOCK_STAT=y
 # CONFIG_DEBUG_LOCKDEP is not set
@@ -2053,13 +2093,9 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -2199,7 +2235,7 @@ CONFIG_CRYPTO_LZO=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
+# CONFIG_BINARY_PRINTF is not set

 #
 # Library routines
@@ -2222,3 +2258,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
--- a/arch/arm/configs/omap3_stalker_lks_defconfig
+++ b/arch/arm/configs/omap3_stalker_lks_defconfig
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -152,6 +152,16 @@ config MACH_AMS_DELTA
 	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
 	  if you have such a device.

+config AMS_DELTA_FIQ
+	bool "Fast Interrupt Request (FIQ) support for the E3"
+	depends on MACH_AMS_DELTA
+	select FIQ
+	help
+	  Provide a FIQ handler for the E3.
+	  This allows for fast handling of interrupts generated
+	  by the clock line of the E3 mailboard (or a PS/2 keyboard)
+	  connected to the GPIO based external keyboard port.
+
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)

--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
 obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
+obj-$(CONFIG_AMS_DELTA_FIQ)		+= ams-delta-fiq.o ams-delta-fiq-handler.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
 obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o


--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+/*
+ *  linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+ *
+ *  Based on  linux/arch/arm/lib/floppydma.S
+ *  Renamed and modified to work with 2.6 kernel by Matt Callow
+ *  Copyright (C) 1995, 1996 Russell King
+ *  Copyright (C) 2004 Pete Trapps
+ *  Copyright (C) 2006 Matt Callow
+ *  Copyright (C) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#include <plat/io.h>
+#include <plat/board-ams-delta.h>
+
+#include <mach/ams-delta-fiq.h>
+
+/*
+ * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
+ * Unfortunately, those were not placed in a separate header file.
+ */
+#define OMAP1510_GPIO_BASE		0xFFFCE000
+#define OMAP1510_GPIO_DATA_INPUT	0x00
+#define OMAP1510_GPIO_DATA_OUTPUT	0x04
+#define OMAP1510_GPIO_DIR_CONTROL	0x08
+#define OMAP1510_GPIO_INT_CONTROL	0x0c
+#define OMAP1510_GPIO_INT_MASK		0x10
+#define OMAP1510_GPIO_INT_STATUS	0x14
+#define OMAP1510_GPIO_PIN_CONTROL	0x18
+
+/* GPIO register bitmasks */
+#define KEYBRD_DATA_MASK		(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
+#define KEYBRD_CLK_MASK			(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK)
+#define MODEM_IRQ_MASK			(0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ)
+#define HOOK_SWITCH_MASK		(0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH)
+#define OTHERS_MASK			(MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
+
+/* IRQ handler register bitmasks */
+#define DEFERRED_FIQ_MASK		(0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
+#define GPIO_BANK1_MASK  		(0x1 << INT_GPIO_BANK1)
+
+/* Driver buffer byte offsets */
+#define BUF_MASK			(FIQ_MASK * 4)
+#define BUF_STATE			(FIQ_STATE * 4)
+#define BUF_KEYS_CNT			(FIQ_KEYS_CNT * 4)
+#define BUF_TAIL_OFFSET			(FIQ_TAIL_OFFSET * 4)
+#define BUF_HEAD_OFFSET			(FIQ_HEAD_OFFSET * 4)
+#define BUF_BUF_LEN			(FIQ_BUF_LEN * 4)
+#define BUF_KEY				(FIQ_KEY * 4)
+#define BUF_MISSED_KEYS			(FIQ_MISSED_KEYS * 4)
+#define BUF_BUFFER_START		(FIQ_BUFFER_START * 4)
+#define BUF_GPIO_INT_MASK		(FIQ_GPIO_INT_MASK * 4)
+#define BUF_KEYS_HICNT			(FIQ_KEYS_HICNT * 4)
+#define BUF_IRQ_PEND			(FIQ_IRQ_PEND * 4)
+#define BUF_SIR_CODE_L1			(FIQ_SIR_CODE_L1 * 4)
+#define BUF_SIR_CODE_L2			(IRQ_SIR_CODE_L2 * 4)
+#define BUF_CNT_INT_00			(FIQ_CNT_INT_00 * 4)
+#define BUF_CNT_INT_KEY			(FIQ_CNT_INT_KEY * 4)
+#define BUF_CNT_INT_MDM			(FIQ_CNT_INT_MDM * 4)
+#define BUF_CNT_INT_03			(FIQ_CNT_INT_03 * 4)
+#define BUF_CNT_INT_HSW			(FIQ_CNT_INT_HSW * 4)
+#define BUF_CNT_INT_05			(FIQ_CNT_INT_05 * 4)
+#define BUF_CNT_INT_06			(FIQ_CNT_INT_06 * 4)
+#define BUF_CNT_INT_07			(FIQ_CNT_INT_07 * 4)
+#define BUF_CNT_INT_08			(FIQ_CNT_INT_08 * 4)
+#define BUF_CNT_INT_09			(FIQ_CNT_INT_09 * 4)
+#define BUF_CNT_INT_10			(FIQ_CNT_INT_10 * 4)
+#define BUF_CNT_INT_11			(FIQ_CNT_INT_11 * 4)
+#define BUF_CNT_INT_12			(FIQ_CNT_INT_12 * 4)
+#define BUF_CNT_INT_13			(FIQ_CNT_INT_13 * 4)
+#define BUF_CNT_INT_14			(FIQ_CNT_INT_14 * 4)
+#define BUF_CNT_INT_15			(FIQ_CNT_INT_15 * 4)
+#define BUF_CIRC_BUFF			(FIQ_CIRC_BUFF * 4)
+
+
+/*
+ * Register useage
+ * r8  - temporary
+ * r9  - the driver buffer
+ * r10 - temporary
+ * r11 - interrupts mask
+ * r12 - base pointers
+ * r13 - interrupts status
+ */
+
+	.text
+
+	.global qwerty_fiqin_end
+
+ENTRY(qwerty_fiqin_start)
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+	@ FIQ intrrupt handler
+	ldr r12, omap_ih1_base			@ set pointer to level1 handler
+
+	ldr r11, [r12, #IRQ_MIR_REG_OFFSET]	@ fetch interrupts mask
+
+	ldr r13, [r12, #IRQ_ITR_REG_OFFSET]	@ fetch interrupts status
+	bics r13, r13, r11			@ clear masked - any left?
+	beq exit				@ none - spurious FIQ? exit
+
+	ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET]	@ get requested interrupt number
+
+	mov r8, #2				@ reset FIQ agreement
+	str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
+
+	cmp r10, #INT_GPIO_BANK1		@ is it GPIO bank interrupt?
+	beq gpio				@ yes - process it
+
+	mov r8, #1
+	orr r8, r11, r8, lsl r10		@ mask spurious interrupt
+	str r8, [r12, #IRQ_MIR_REG_OFFSET]
+exit:
+	subs	pc, lr, #4			@ return from FIQ
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@
+gpio:	@ GPIO bank interrupt handler
+	ldr r12, omap1510_gpio_base		@ set base pointer to GPIO bank
+
+	ldr r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ fetch GPIO interrupts mask
+restart:
+	ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS]	@ fetch status bits
+	bics r13, r13, r11			@ clear masked - any left?
+	beq exit				@ no - spurious interrupt? exit
+
+	orr r11, r11, r13			@ mask all requested interrupts
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
+	beq hksw				@ no - try next source
+
+
+	@@@@@@@@@@@@@@@@@@@@@@
+	@ Keyboard clock FIQ mode interrupt handler
+	@ r10 now contains KEYBRD_CLK_MASK, use it
+	str r10, [r12, #OMAP1510_GPIO_INT_STATUS]	@ ack the interrupt
+	bic r11, r11, r10				@ unmask it
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+	@ Process keyboard data
+	ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT]	@ fetch GPIO input
+
+	ldr r10, [r9, #BUF_STATE]		@ fetch kbd interface state
+	cmp r10, #0				@ are we expecting start bit?
+	bne data				@ no - go to data processing
+
+	ands r8, r8, #KEYBRD_DATA_MASK		@ check start bit - detected?
+	beq hksw				@ no - try next source
+
+	@ r8 contains KEYBRD_DATA_MASK, use it
+	str r8, [r9, #BUF_STATE]		@ enter data processing state
+	@ r10 already contains 0, reuse it
+	str r10, [r9, #BUF_KEY]			@ clear keycode
+	mov r10, #2				@ reset input bit mask
+	str r10, [r9, #BUF_MASK]
+
+	@ Mask other GPIO line interrupts till key done
+	str r11, [r9, #BUF_GPIO_INT_MASK]	@ save mask for later restore
+	mvn r11, #KEYBRD_CLK_MASK		@ prepare all except kbd mask
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ store into the mask register
+
+	b restart				@ restart
+
+data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
+
+	@ r8 still contains GPIO input bits
+	ands r8, r8, #KEYBRD_DATA_MASK		@ is keyboard data line low?
+	ldreq r8, [r9, #BUF_KEY]		@ yes - fetch collected so far,
+	orreq r8, r8, r10			@ set 1 at current mask position
+	streq r8, [r9, #BUF_KEY]		@ and save back
+
+	mov r10, r10, lsl #1			@ shift mask left
+	bics r10, r10, #0x800			@ have we got all the bits?
+	strne r10, [r9, #BUF_MASK]		@ not yet - store the mask
+	bne restart				@ and restart
+
+	@ r10 already contains 0, reuse it
+	str r10, [r9, #BUF_STATE]		@ reset state to start
+
+	@ Key done - restore interrupt mask
+	ldr r10, [r9, #BUF_GPIO_INT_MASK]	@ fetch saved mask
+	and r11, r11, r10			@ unmask all saved as unmasked
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ restore into the mask register
+
+	@ Try appending the keycode to the circular buffer
+	ldr r10, [r9, #BUF_KEYS_CNT]		@ get saved keystrokes count
+	ldr r8, [r9, #BUF_BUF_LEN]		@ get buffer size
+	cmp r10, r8				@ is buffer full?
+	beq hksw				@ yes - key lost, next source
+
+	add r10, r10, #1			@ incremet keystrokes counter
+	str r10, [r9, #BUF_KEYS_CNT]
+
+	ldr r10, [r9, #BUF_TAIL_OFFSET]		@ get buffer tail offset
+	@ r8 already contains buffer size
+	cmp r10, r8				@ end of buffer?
+	moveq r10, #0				@ yes - rewind to buffer start
+
+	ldr r12, [r9, #BUF_BUFFER_START]	@ get buffer start address
+	add r12, r12, r10, LSL #2		@ calculate buffer tail address
+	ldr r8, [r9, #BUF_KEY]			@ get last keycode
+	str r8, [r12]				@ append it to the buffer tail
+
+	add r10, r10, #1			@ increment buffer tail offset
+	str r10, [r9, #BUF_TAIL_OFFSET]
+
+	ldr r10, [r9, #BUF_CNT_INT_KEY]		@ increment interrupts counter
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_KEY]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+hksw:	@Is hook switch interrupt requested?
+	tst r13, #HOOK_SWITCH_MASK 		@ is hook switch status bit set?
+	beq mdm					@ no - try next source
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@
+	@ Hook switch interrupt FIQ mode simple handler
+
+	@ Don't toggle active edge, the switch always bounces
+
+	@ Increment hook switch interrupt counter
+	ldr r10, [r9, #BUF_CNT_INT_HSW]
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_HSW]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+mdm:	@Is it a modem interrupt?
+	tst r13, #MODEM_IRQ_MASK 		@ is modem status bit set?
+	beq irq					@ no - check for next interrupt
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@
+	@ Modem FIQ mode interrupt handler stub
+
+	@ Increment modem interrupt counter
+	ldr r10, [r9, #BUF_CNT_INT_MDM]
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_MDM]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+irq:	@ Place deferred_fiq interrupt request
+	ldr r12, deferred_fiq_ih_base		@ set pointer to IRQ handler
+	mov r10, #DEFERRED_FIQ_MASK		@ set deferred_fiq bit
+	str r10, [r12, #IRQ_ISR_REG_OFFSET] 	@ place it in the ISR register
+
+	ldr r12, omap1510_gpio_base		@ set pointer back to GPIO bank
+	b restart				@ check for next GPIO interrupt
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+/*
+ * Virtual addresses for IO
+ */
+omap_ih1_base:
+	.word OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+deferred_fiq_ih_base:
+	.word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE)
+omap1510_gpio_base:
+	.word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE)
+qwerty_fiqin_end:
+
+/*
+ * Check the size of the FIQ,
+ * it cannot go beyond 0xffff0200, and is copied to 0xffff001c
+ */
+.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c)
+	.err
+.endif
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
+/*
+ *  Amstrad E3 FIQ handling
+ *
+ *  Copyright (C) 2009 Janusz Krzysztofik
+ *  Copyright (c) 2006 Matt Callow
+ *  Copyright (c) 2004 Amstrad Plc
+ *  Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c
+ * in the MontaVista 2.4 kernel (and the Amstrad changes therein)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <plat/board-ams-delta.h>
+
+#include <asm/fiq.h>
+#include <mach/ams-delta-fiq.h>
+
+static struct fiq_handler fh = {
+	.name	= "ams-delta-fiq"
+};
+
+/*
+ * This buffer is shared between FIQ and IRQ contexts.
+ * The FIQ and IRQ isrs can both read and write it.
+ * It is structured as a header section several 32bit slots,
+ * followed by the circular buffer where the FIQ isr stores
+ * keystrokes received from the qwerty keyboard.
+ * See ams-delta-fiq.h for details of offsets.
+ */
+unsigned int fiq_buffer[1024];
+EXPORT_SYMBOL(fiq_buffer);
+
+static unsigned int irq_counter[16];
+
+static irqreturn_t deferred_fiq(int irq, void *dev_id)
+{
+	struct irq_desc *irq_desc;
+	struct irq_chip *irq_chip = NULL;
+	int gpio, irq_num, fiq_count;
+
+	irq_desc = irq_to_desc(IH_GPIO_BASE);
+	if (irq_desc)
+		irq_chip = irq_desc->chip;
+
+	/*
+	 * For each handled GPIO interrupt, keep calling its interrupt handler
+	 * until the IRQ counter catches the FIQ incremented interrupt counter.
+	 */
+	for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK;
+			gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) {
+		irq_num = gpio_to_irq(gpio);
+		fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
+
+		while (irq_counter[gpio] < fiq_count) {
+			if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
+				/*
+				 * It looks like handle_edge_irq() that
+				 * OMAP GPIO edge interrupts default to,
+				 * expects interrupt already unmasked.
+				 */
+				if (irq_chip && irq_chip->unmask)
+					irq_chip->unmask(irq_num);
+			}
+			generic_handle_irq(irq_num);
+
+			irq_counter[gpio]++;
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+void __init ams_delta_init_fiq(void)
+{
+	void *fiqhandler_start;
+	unsigned int fiqhandler_length;
+	struct pt_regs FIQ_regs;
+	unsigned long val, offset;
+	int i, retval;
+
+	fiqhandler_start = &qwerty_fiqin_start;
+	fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start;
+	pr_info("Installing fiq handler from %p, length 0x%x\n",
+			fiqhandler_start, fiqhandler_length);
+
+	retval = claim_fiq(&fh);
+	if (retval) {
+		pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n",
+				retval);
+		return;
+	}
+
+	retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
+			IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0);
+	if (retval < 0) {
+		pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
+		release_fiq(&fh);
+		return;
+	}
+	/*
+	 * Since no set_type() method is provided by OMAP irq chip,
+	 * switch to edge triggered interrupt type manually.
+	 */
+	offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
+	val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
+	omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
+
+	set_fiq_handler(fiqhandler_start, fiqhandler_length);
+
+	/*
+	 * Initialise the buffer which is shared
+	 * between FIQ mode and IRQ mode
+	 */
+	fiq_buffer[FIQ_GPIO_INT_MASK]	= 0;
+	fiq_buffer[FIQ_MASK]		= 0;
+	fiq_buffer[FIQ_STATE]		= 0;
+	fiq_buffer[FIQ_KEY]		= 0;
+	fiq_buffer[FIQ_KEYS_CNT]	= 0;
+	fiq_buffer[FIQ_KEYS_HICNT]	= 0;
+	fiq_buffer[FIQ_TAIL_OFFSET]	= 0;
+	fiq_buffer[FIQ_HEAD_OFFSET]	= 0;
+	fiq_buffer[FIQ_BUF_LEN]		= 256;
+	fiq_buffer[FIQ_MISSED_KEYS]	= 0;
+	fiq_buffer[FIQ_BUFFER_START]	=
+			(unsigned int) &fiq_buffer[FIQ_CIRC_BUFF];
+
+	for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++)
+		fiq_buffer[i] = 0;
+
+	/*
+	 * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr
+	 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
+	 * only means of communication with the IRQ level and other kernel
+	 * context code.
+	 */
+	FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer;
+	set_fiq_regs(&FIQ_regs);
+
+	pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer);
+
+	/*
+	 * Redirect GPIO interrupts to FIQ
+	 */
+	offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
+	val = omap_readl(OMAP_IH1_BASE + offset) | 1;
+	omap_writel(val, OMAP_IH1_BASE + offset);
+}
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -33,6 +33,8 @@
 #include <plat/board.h>
 #include <plat/common.h>

+#include <mach/ams-delta-fiq.h>
+
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;

@@ -236,6 +238,10 @@ static void __init ams_delta_init(void)
 	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));

+#ifdef CONFIG_AMS_DELTA_FIQ
+	ams_delta_init_fiq();
+#endif
+
 	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }

@@ -263,8 +269,18 @@ static struct platform_device ams_delta_modem_device = {

 static int __init ams_delta_modem_init(void)
 {
+	int err;
+
 	omap_cfg_reg(M14_1510_GPIO2);
-	ams_delta_modem_ports[0].irq = gpio_to_irq(2);
+	ams_delta_modem_ports[0].irq =
+			gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+
+	err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
+	if (err) {
+		pr_err("Couldn't request gpio pin for modem\n");
+		return err;
+	}
+	gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);

 	ams_delta_latch2_write(
 		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,

--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -578,7 +578,7 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate)

 #ifdef CONFIG_OMAP_RESET_CLOCKS

-void __init omap1_clk_disable_unused(struct clk *clk)
+void omap1_clk_disable_unused(struct clk *clk)
 {
 	__u32 regval32;


--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -39,7 +39,7 @@ extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
 extern unsigned long omap1_watchdog_recalc(struct clk *clk);

 #ifdef CONFIG_OMAP_RESET_CLOCKS
-extern void __init omap1_clk_disable_unused(struct clk *clk);
+extern void omap1_clk_disable_unused(struct clk *clk);
 #else
 #define omap1_clk_disable_unused	NULL
 #endif

--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+/*
+ * arch/arm/mach-omap1/include/ams-delta-fiq.h
+ *
+ * Taken from the original Amstrad modifications to fiq.h
+ *
+ * Copyright (c) 2004 Amstrad Plc
+ * Copyright (c) 2006 Matt Callow
+ * Copyright (c) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __AMS_DELTA_FIQ_H
+#define __AMS_DELTA_FIQ_H
+
+#include <plat/irqs.h>
+
+/*
+ * Interrupt number used for passing control from FIQ to IRQ.
+ * IRQ12, described as reserved, has been selected.
+ */
+#define INT_DEFERRED_FIQ	INT_1510_RES12
+/*
+ * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to.
+ */
+#if (INT_DEFERRED_FIQ < IH2_BASE)
+#define DEFERRED_FIQ_IH_BASE	OMAP_IH1_BASE
+#else
+#define DEFERRED_FIQ_IH_BASE	OMAP_IH2_BASE
+#endif
+
+/*
+ * These are the offsets from the begining of the fiq_buffer. They are put here
+ * since the buffer and header need to be accessed by drivers servicing devices
+ * which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
+ */
+#define FIQ_MASK		 0
+#define FIQ_STATE		 1
+#define FIQ_KEYS_CNT		 2
+#define FIQ_TAIL_OFFSET		 3
+#define FIQ_HEAD_OFFSET		 4
+#define FIQ_BUF_LEN		 5
+#define FIQ_KEY			 6
+#define FIQ_MISSED_KEYS		 7
+#define FIQ_BUFFER_START	 8
+#define FIQ_GPIO_INT_MASK	 9
+#define FIQ_KEYS_HICNT		10
+#define FIQ_IRQ_PEND		11
+#define FIQ_SIR_CODE_L1		12
+#define IRQ_SIR_CODE_L2		13
+
+#define FIQ_CNT_INT_00		14
+#define FIQ_CNT_INT_KEY		15
+#define FIQ_CNT_INT_MDM		16
+#define FIQ_CNT_INT_03		17
+#define FIQ_CNT_INT_HSW		18
+#define FIQ_CNT_INT_05		19
+#define FIQ_CNT_INT_06		20
+#define FIQ_CNT_INT_07		21
+#define FIQ_CNT_INT_08		22
+#define FIQ_CNT_INT_09		23
+#define FIQ_CNT_INT_10		24
+#define FIQ_CNT_INT_11		25
+#define FIQ_CNT_INT_12		26
+#define FIQ_CNT_INT_13		27
+#define FIQ_CNT_INT_14		28
+#define FIQ_CNT_INT_15		29
+
+#define FIQ_CIRC_BUFF		30      /*Start of circular buffer */
+
+#ifndef __ASSEMBLER__
+extern unsigned int fiq_buffer[];
+extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end;
+
+extern void __init ams_delta_init_fiq(void);
+#endif
+
+#endif
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,6 +13,8 @@

 #include <linux/serial_reg.h>

+#include <asm/memory.h>
+
 #include <plat/serial.h>

 		.pushsection .data
@@ -37,23 +39,12 @@ omap_uart_virt:	.word	0x0
 		cmp	\rx, #0			@ is port configured?
 		bne	99f			@ already configured

-		/* Check 7XX UART1 scratchpad register for uart to use */
+		/* Check the debug UART configuration set in uncompress.h */
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000	@ OMAP1UART1
-		ldrb	\rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)]
-		cmp	\rx, #0			@ anything in 7XX scratchpad?
-		bne	10f			@ found 7XX uart
-
-		/* Check 15xx/16xx UART1 scratchpad register for uart to use */
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000	@ OMAP1UART1
-		ldrb	\rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)]
+		ldreq	\rx, =OMAP_UART_INFO
+		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
+		ldr	\rx, [\rx, #0]

 		/* Select the UART to use based on the UART1 scratchpad value */
 10:		cmp	\rx, #0			@ no port configured?

--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -10,6 +10,7 @@ config ARCH_OMAP2420
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
+	select ARCH_OMAP_OTG

 config ARCH_OMAP3430
 	bool "OMAP3430 support"
@@ -141,6 +142,12 @@ config MACH_IGEP0020
 	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB

+config MACH_SBC3530
+	bool "OMAP3 SBC STALKER board"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CUS
+	select OMAP_MUX
+
 config MACH_OMAP_3630SDP
 	bool "OMAP3630 SDP board"
 	depends on ARCH_OMAP3

--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -22,7 +22,7 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o

 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a

@@ -89,10 +89,7 @@ obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o

-iommu-y					+= iommu2.o
-iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
-
-obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
+obj-$(CONFIG_OMAP_IOMMU)		:= iommu2.o omap-iommu.o

 i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
 obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
@@ -140,10 +137,13 @@ obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
 					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
+obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
+					   hsmmc.o

 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o

+obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
+					   hsmmc.o
 # Platform specific device init code
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o

--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -174,9 +174,18 @@ static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
 	},
 };

+static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2D),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP_GPIO_IRQ(78),
+	},
+};
+
 static int __init omap2430_i2c_init(void)
 {
-	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
+			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
 	omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c_boardinfo));
 	return 0;
@@ -198,6 +207,15 @@ static struct omap_musb_board_data musb_board_data = {
 	.mode			= MUSB_OTG,
 	.power			= 100,
 };
+static struct omap_usb_config sdp2430_usb_config __initdata = {
+	.otg		= 1,
+#ifdef  CONFIG_USB_GADGET_OMAP
+	.hmc_mode	= 0x0,
+#elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	.hmc_mode	= 0x1,
+#endif
+	.pins[0]	= 3,
+};

 static void __init omap_2430sdp_init(void)
 {
@@ -208,6 +226,7 @@ static void __init omap_2430sdp_init(void)
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	omap2_hsmmc_init(mmc);
+	omap_usb_init(&sdp2430_usb_config);
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();


--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -150,6 +150,7 @@ static int ads7846_get_pendown_state(void)
 static struct ads7846_platform_data tsc2046_config __initdata = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
+	.wakeup				= true,
 };



--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -18,8 +18,12 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>

 #include <mach/hardware.h>
+#include <mach/omap4-common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -29,8 +33,77 @@
 #include <plat/control.h>
 #include <plat/timer-gp.h>
 #include <plat/usb.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <plat/mmc.h>
+#include "hsmmc.h"
+
+#define ETH_KS8851_IRQ			34
+#define ETH_KS8851_POWER_ON		48
+#define ETH_KS8851_QUART		138
+
+static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
+	{
+		.modalias               = "ks8851",
+		.bus_num                = 1,
+		.chip_select            = 0,
+		.max_speed_hz           = 24000000,
+		.irq                    = ETH_KS8851_IRQ,
+	},
+};
+
+static int omap_ethernet_init(void)
+{
+	int status;
+
+	/* Request of GPIO lines */
+
+	status = gpio_request(ETH_KS8851_POWER_ON, "eth_power");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON);
+		return status;
+	}
+
+	status = gpio_request(ETH_KS8851_QUART, "quart");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART);
+		goto error1;
+	}
+
+	status = gpio_request(ETH_KS8851_IRQ, "eth_irq");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ);
+		goto error2;
+	}
+
+	/* Configuration of requested GPIO lines */
+
+	status = gpio_direction_output(ETH_KS8851_POWER_ON, 1);
+	if (status) {
+		pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ);
+		goto error3;
+	}
+
+	status = gpio_direction_output(ETH_KS8851_QUART, 1);
+	if (status) {
+		pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART);
+		goto error3;
+	}
+
+	status = gpio_direction_input(ETH_KS8851_IRQ);
+	if (status) {
+		pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ);
+		goto error3;
+	}
+
+	return 0;
+
+error3:
+	gpio_free(ETH_KS8851_IRQ);
+error2:
+	gpio_free(ETH_KS8851_QUART);
+error1:
+	gpio_free(ETH_KS8851_POWER_ON);
+	return status;
+}

 static struct platform_device sdp4430_lcd_device = {
 	.name		= "sdp4430_lcd",
@@ -49,50 +122,6 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };

-#ifdef CONFIG_CACHE_L2X0
-static int __init omap_l2_cache_init(void)
-{
-	extern void omap_smc1(u32 fn, u32 arg);
-	void __iomem *l2cache_base;
-
-	/* To avoid code running on other OMAPs in
-	 * multi-omap builds
-	 */
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
-
-	/* Static mapping, never released */
-	l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
-	BUG_ON(!l2cache_base);
-
-	/* Enable PL310 L2 Cache controller */
-	omap_smc1(0x102, 0x1);
-
-	/* 32KB way size, 16-way associativity,
-	* parity disabled
-	*/
-	l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
-
-	return 0;
-}
-early_initcall(omap_l2_cache_init);
-#endif
-
-static void __init gic_init_irq(void)
-{
-	void __iomem *base;
-
-	/* Static mapping, never released */
-	base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
-	BUG_ON(!base);
-	gic_dist_init(0, base, 29);
-
-	/* Static mapping, never released */
-	gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
-	BUG_ON(!gic_cpu_base_addr);
-	gic_cpu_init(0, gic_cpu_base_addr);
-}
-
 static void __init omap_4430sdp_init_irq(void)
 {
 	omap_board_config = sdp4430_config;
@@ -111,15 +140,254 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };

+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 8,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.nonremovable   = true,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.0",
+	},
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.1",
+	},
+};
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0)
+		pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
+						MMCDETECT_INTR_OFFSET;
+	return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap2_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++)
+		omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+	return 0;
+}
+
+static struct regulator_init_data sdp4430_vaux1 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vaux2 = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vaux3 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data sdp4430_vmmc = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 2,
+	.consumer_supplies      = sdp4430_vmmc_supply,
+};
+
+static struct regulator_init_data sdp4430_vpp = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 2500000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vusim = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2900000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vana = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vcxio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vusb = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct twl4030_platform_data sdp4430_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+
+	/* Regulators */
+	.vmmc		= &sdp4430_vmmc,
+	.vpp		= &sdp4430_vpp,
+	.vusim		= &sdp4430_vusim,
+	.vana		= &sdp4430_vana,
+	.vcxio		= &sdp4430_vcxio,
+	.vdac		= &sdp4430_vdac,
+	.vusb		= &sdp4430_vusb,
+	.vaux1		= &sdp4430_vaux1,
+	.vaux2		= &sdp4430_vaux2,
+	.vaux3		= &sdp4430_vaux3,
+};
+
+static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP44XX_IRQ_SYS_1N,
+		.platform_data = &sdp4430_twldata,
+	},
+};
+static int __init omap4_i2c_init(void)
+{
+	/*
+	 * Phoenix Audio IC needs I2C1 to
+	 * start with 400 KHz or less
+	 */
+	omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
+			ARRAY_SIZE(sdp4430_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(4, 400, NULL, 0);
+	return 0;
+}
 static void __init omap_4430sdp_init(void)
 {
+	int status;
+
+	omap4_i2c_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	omap_serial_init();
+	omap4_twl6030_hsmmc_init(mmc);
 	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
 	usb_nop_xceiv_register();
 	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
 	if (!cpu_is_omap44xx())
 		usb_musb_init(&musb_board_data);
+
+	status = omap_ethernet_init();
+	if (status) {
+		pr_err("Ethernet initialization failed: %d\n", status);
+	} else {
+		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
+		spi_register_board_info(sdp4430_spi_board_info,
+				ARRAY_SIZE(sdp4430_spi_board_info));
+	}
 }

 static void __init omap_4430sdp_map_io(void)

--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -21,6 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/can/platform/ti_hecc.h>
+#include <linux/davinci_emac.h>

 #include <mach/hardware.h>
 #include <mach/am35xx.h>
@@ -30,16 +32,111 @@

 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/display.h>

 #include "mux.h"

+#define AM35XX_EVM_PHY_MASK		(0xF)
+#define AM35XX_EVM_MDIO_FREQUENCY	(1000000)
+
+static struct emac_platform_data am3517_evm_emac_pdata = {
+	.phy_mask	= AM35XX_EVM_PHY_MASK,
+	.mdio_max_freq	= AM35XX_EVM_MDIO_FREQUENCY,
+	.rmii_en	= 1,
+};
+
+static struct resource am3517_emac_resources[] = {
+	{
+		.start  = AM35XX_IPSS_EMAC_BASE,
+		.end    = AM35XX_IPSS_EMAC_BASE + 0x3FFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.end    = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_emac_device = {
+	.name		= "davinci_emac",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_emac_resources),
+	.resource	= am3517_emac_resources,
+};
+
+static void am3517_enable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
+		AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am3517_disable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
+{
+	unsigned int regval;
+
+	pdata->ctrl_reg_offset		= AM35XX_EMAC_CNTRL_OFFSET;
+	pdata->ctrl_mod_reg_offset	= AM35XX_EMAC_CNTRL_MOD_OFFSET;
+	pdata->ctrl_ram_offset		= AM35XX_EMAC_CNTRL_RAM_OFFSET;
+	pdata->mdio_reg_offset		= AM35XX_EMAC_MDIO_OFFSET;
+	pdata->ctrl_ram_size		= AM35XX_EMAC_CNTRL_RAM_SIZE;
+	pdata->version			= EMAC_VERSION_2;
+	pdata->hw_ram_addr		= AM35XX_EMAC_HW_RAM_ADDR;
+	pdata->interrupt_enable		= am3517_enable_ethernet_int;
+	pdata->interrupt_disable	= am3517_disable_ethernet_int;
+	am3517_emac_device.dev.platform_data	= pdata;
+	platform_device_register(&am3517_emac_device);
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+	return ;
+}
+
+
+
 #define LCD_PANEL_PWR		176
 #define LCD_PANEL_BKLIGHT_PWR	182
 #define LCD_PANEL_PWM		181

-static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = {
+static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("s35390a", 0x30),
 		.type		= "s35390a",
@@ -69,7 +166,7 @@ static void __init am3517_evm_rtc_init(void)
 		gpio_free(GPIO_RTCS35390A_IRQ);
 		return;
 	}
-	am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
+	am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
 }

 /*
@@ -80,7 +177,7 @@ static void __init am3517_evm_rtc_init(void)
 static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 };
-static struct i2c_board_info __initdata am3517evm_tca6416_info_0[] = {
+static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("tca6416", 0x21),
 		.platform_data = &am3517evm_gpio_expander_info_0,
@@ -94,7 +191,7 @@ static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
 static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES + 32,
 };
-static struct i2c_board_info __initdata am3517evm_ui_tca6416_info[] = {
+static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("tca6416", 0x20),
 		.platform_data = &am3517evm_ui_gpio_expander_info_1,
@@ -108,10 +205,10 @@ static struct i2c_board_info __initdata am3517evm_ui_tca6416_info[] = {
 static int __init am3517_evm_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 400, NULL, 0);
-	omap_register_i2c_bus(2, 400, am3517evm_tca6416_info_0,
-			ARRAY_SIZE(am3517evm_tca6416_info_0));
-	omap_register_i2c_bus(3, 400, am3517evm_ui_tca6416_info,
-			ARRAY_SIZE(am3517evm_ui_tca6416_info));
+	omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo,
+			ARRAY_SIZE(am3517evm_i2c2_boardinfo));
+	omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo,
+			ARRAY_SIZE(am3517evm_i2c3_boardinfo));

 	return 0;
 }
@@ -119,6 +216,8 @@ static int __init am3517_evm_i2c_init(void)
 static int lcd_enabled;
 static int dvi_enabled;

+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
 static void __init am3517_evm_display_init(void)
 {
 	int r;
@@ -162,6 +261,9 @@ static void __init am3517_evm_display_init(void)
 err_1:
 	gpio_free(LCD_PANEL_BKLIGHT_PWR);
 }
+#else
+static void __init am3517_evm_display_init(void) {}
+#endif

 static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
@@ -275,7 +377,12 @@ static void __init am3517_evm_init_irq(void)

 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+#else
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+#endif
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,

 	.phy_reset  = true,
@@ -292,6 +399,42 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif

+
+static struct resource am3517_hecc_resources[] = {
+	{
+		.start	= AM35XX_IPSS_HECC_BASE,
+		.end	= AM35XX_IPSS_HECC_BASE + 0x3FFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_35XX_HECC0_IRQ,
+		.end	= INT_35XX_HECC0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_hecc_device = {
+	.name		= "ti_hecc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_hecc_resources),
+	.resource	= am3517_hecc_resources,
+};
+
+static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
+	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
+	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
+	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
+	.int_line		= AM35XX_HECC_INT_LINE,
+	.version		= AM35XX_HECC_VERSION,
+};
+
+static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
+{
+	am3517_hecc_device.dev.platform_data = pdata;
+	platform_device_register(&am3517_hecc_device);
+}
+
 static void __init am3517_evm_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -305,14 +448,17 @@ static void __init am3517_evm_init(void)
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
 	usb_ehci_init(&ehci_pdata);
+	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
 	/* DSS */
 	am3517_evm_display_init();

 	/* RTC - S35390A */
 	am3517_evm_rtc_init();

-	i2c_register_board_info(1, am3517evm_i2c_boardinfo,
-				ARRAY_SIZE(am3517evm_i2c_boardinfo));
+	i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
+				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
+	/*Ethernet*/
+	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
 }

 static void __init am3517_evm_map_io(void)

--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -45,6 +45,7 @@
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/mcspi.h>

 #include <mach/hardware.h>


--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ b/arch/arm/mach-omap2/clock_common_data.c
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
--- a/arch/arm/mach-omap2/clockdomains44xx.h
+++ b/arch/arm/mach-omap2/clockdomains44xx.h
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
--- a/arch/arm/mach-omap2/cm.c
+++ b/arch/arm/mach-omap2/cm.c
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
--- a/arch/arm/mach-omap2/cm4xxx.c
+++ b/arch/arm/mach-omap2/cm4xxx.c
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
--- a/arch/arm/mach-omap2/include/mach/am35xx.h
+++ b/arch/arm/mach-omap2/include/mach/am35xx.h
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
--- a/arch/arm/mach-omap2/include/mach/omap4-common.h
+++ b/arch/arm/mach-omap2/include/mach/omap4-common.h
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
--- a/arch/arm/mach-omap2/omap3-iommu.c
+++ b/arch/arm/mach-omap2/omap3-iommu.c
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
--- a/arch/arm/mach-omap2/powerdomains44xx.h
+++ b/arch/arm/mach-omap2/powerdomains44xx.h
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig