[PATCH] x86_64: Clean and enhance up K8 northbridge access code

 - Factor out the duplicated access/cache code into a single file
   * Shared between i386/x86-64.
 - Share flush code between AGP and IOMMU
   * Fix a bug: AGP didn't wait for end of flush before
 - Drop 8 northbridges limit and allocate dynamically
 - Add lock to serialize AGP and IOMMU GART flushes
 - Add PCI ID for next AMD northbridge
 - Random related cleanups

The old K8 NUMA discovery code is unchanged. New systems
should all use SRAT for this.

Cc: "Navin Boppuri" <navin.boppuri@newisys.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/i386/Kconfig

@@ -1054,6 +1054,10 @@ config SCx200
 	  This support is also available as a module.  If compiled as a
 	  module, it will be called scx200.
 
+config K8_NB
+	def_bool y
+	depends on AGP_AMD64
+
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"

arch/i386/kernel/Makefile

@@ -37,6 +37,7 @@ obj-$(CONFIG_EFI) 		+= efi.o efi_stub.o
 obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault.o
 obj-$(CONFIG_VM86)		+= vm86.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_K8_NB)		+= k8.o
 
 EXTRA_AFLAGS   := -traditional
 
@@ -76,3 +77,6 @@ SYSCFLAGS_vsyscall-syms.o = -r
 $(obj)/vsyscall-syms.o: $(src)/vsyscall.lds \
 			$(obj)/vsyscall-sysenter.o $(obj)/vsyscall-note.o FORCE
 	$(call if_changed,syscall)
+
+k8-y                      += ../../x86_64/kernel/k8.o
+

arch/x86_64/Kconfig

@@ -501,6 +501,10 @@ config REORDER
          optimal TLB usage. If you have pretty much any version of binutils, 
 	 this can increase your kernel build time by roughly one minute.
 
+config K8_NB
+	def_bool y
+	depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA)
+
 endmenu
 
 #

arch/x86_64/kernel/Makefile

@@ -33,6 +33,7 @@ obj-$(CONFIG_SWIOTLB)		+= pci-swiotlb.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer.o
 obj-$(CONFIG_X86_VSMP)		+= vsmp.o
+obj-$(CONFIG_K8_NB)		+= k8.o
 
 obj-$(CONFIG_MODULES)		+= module.o
 

arch/x86_64/kernel/aperture.c

@@ -24,6 +24,7 @@
 #include <asm/proto.h>
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
+#include <asm/k8.h>
 
 int iommu_aperture;
 int iommu_aperture_disabled __initdata = 0;
@@ -37,8 +38,6 @@ int fix_aperture __initdata = 1;
 /* This code runs before the PCI subsystem is initialized, so just
    access the northbridge directly. */
 
-#define NB_ID_3 (PCI_VENDOR_ID_AMD | (0x1103<<16))
-
 static u32 __init allocate_aperture(void) 
 {
 	pg_data_t *nd0 = NODE_DATA(0);
@@ -68,20 +67,20 @@ static u32 __init allocate_aperture(void)
 	return (u32)__pa(p); 
 }
 
-static int __init aperture_valid(char *name, u64 aper_base, u32 aper_size) 
+static int __init aperture_valid(u64 aper_base, u32 aper_size)
 { 
 	if (!aper_base) 
 		return 0;
 	if (aper_size < 64*1024*1024) { 
-		printk("Aperture from %s too small (%d MB)\n", name, aper_size>>20); 
+		printk("Aperture too small (%d MB)\n", aper_size>>20);
 		return 0;
 	}
 	if (aper_base + aper_size >= 0xffffffff) { 
-		printk("Aperture from %s beyond 4GB. Ignoring.\n",name);
+		printk("Aperture beyond 4GB. Ignoring.\n");
 		return 0; 
 	}
 	if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) {
-		printk("Aperture from %s pointing to e820 RAM. Ignoring.\n",name);
+		printk("Aperture pointing to e820 RAM. Ignoring.\n");
 		return 0; 
 	} 
 	return 1;
@@ -140,7 +139,7 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
 	printk("Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", 
 	       aper, 32 << *order, apsizereg);
 
-	if (!aperture_valid("AGP bridge", aper, (32*1024*1024) << *order))
+	if (!aperture_valid(aper, (32*1024*1024) << *order))
 	    return 0;
 	return (u32)aper; 
 } 
@@ -208,9 +207,8 @@ void __init iommu_hole_init(void)
 
 	fix = 0;
 	for (num = 24; num < 32; num++) {		
-		char name[30];
-		if (read_pci_config(0, num, 3, 0x00) != NB_ID_3) 
-			continue;	
+		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
+			continue;
 
 		iommu_aperture = 1; 
 
@@ -222,9 +220,7 @@ void __init iommu_hole_init(void)
 		printk("CPU %d: aperture @ %Lx size %u MB\n", num-24, 
 		       aper_base, aper_size>>20);
 		
-		sprintf(name, "northbridge cpu %d", num-24); 
-
-		if (!aperture_valid(name, aper_base, aper_size)) { 
+		if (!aperture_valid(aper_base, aper_size)) {
 			fix = 1; 
 			break; 
 		}
@@ -273,7 +269,7 @@ void __init iommu_hole_init(void)
 
 	/* Fix up the north bridges */
 	for (num = 24; num < 32; num++) { 		
-		if (read_pci_config(0, num, 3, 0x00) != NB_ID_3) 
+		if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
 			continue;	
 
 		/* Don't enable translation yet. That is done later. 

arch/x86_64/kernel/k8.c

+/*
+ * Shared support code for AMD K8 northbridges and derivates.
+ * Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2.
+ */
+#include <linux/gfp.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/k8.h>
+
+int num_k8_northbridges;
+EXPORT_SYMBOL(num_k8_northbridges);
+
+static u32 *flush_words;
+
+struct pci_device_id k8_nb_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) },
+	{}
+};
+EXPORT_SYMBOL(k8_nb_ids);
+
+struct pci_dev **k8_northbridges;
+EXPORT_SYMBOL(k8_northbridges);
+
+static struct pci_dev *next_k8_northbridge(struct pci_dev *dev)
+{
+	do {
+		dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+		if (!dev)
+			break;
+	} while (!pci_match_id(&k8_nb_ids[0], dev));
+	return dev;
+}
+
+int cache_k8_northbridges(void)
+{
+	int i;
+	struct pci_dev *dev;
+	if (num_k8_northbridges)
+		return 0;
+
+	num_k8_northbridges = 0;
+	dev = NULL;
+	while ((dev = next_k8_northbridge(dev)) != NULL)
+		num_k8_northbridges++;
+
+	k8_northbridges = kmalloc((num_k8_northbridges + 1) * sizeof(void *),
+				  GFP_KERNEL);
+	if (!k8_northbridges)
+		return -ENOMEM;
+
+	flush_words = kmalloc(num_k8_northbridges * sizeof(u32), GFP_KERNEL);
+	if (!flush_words) {
+		kfree(k8_northbridges);
+		return -ENOMEM;
+	}
+
+	dev = NULL;
+	i = 0;
+	while ((dev = next_k8_northbridge(dev)) != NULL) {
+		k8_northbridges[i++] = dev;
+		pci_read_config_dword(dev, 0x9c, &flush_words[i]);
+	}
+	k8_northbridges[i] = NULL;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cache_k8_northbridges);
+
+/* Ignores subdevice/subvendor but as far as I can figure out
+   they're useless anyways */
+int __init early_is_k8_nb(u32 device)
+{
+	struct pci_device_id *id;
+	u32 vendor = device & 0xffff;
+	device >>= 16;
+	for (id = k8_nb_ids; id->vendor; id++)
+		if (vendor == id->vendor && device == id->device)
+			return 1;
+	return 0;
+}
+
+void k8_flush_garts(void)
+{
+	int flushed, i;
+	unsigned long flags;
+	static DEFINE_SPINLOCK(gart_lock);
+
+	/* Avoid races between AGP and IOMMU. In theory it's not needed
+	   but I'm not sure if the hardware won't lose flush requests
+	   when another is pending. This whole thing is so expensive anyways
+	   that it doesn't matter to serialize more. -AK */
+	spin_lock_irqsave(&gart_lock, flags);
+	flushed = 0;
+	for (i = 0; i < num_k8_northbridges; i++) {
+		pci_write_config_dword(k8_northbridges[i], 0x9c,
+				       flush_words[i]|1);
+		flushed++;
+	}
+	for (i = 0; i < num_k8_northbridges; i++) {
+		u32 w;
+		/* Make sure the hardware actually executed the flush*/
+		for (;;) {
+			pci_read_config_dword(k8_northbridges[i],
+					      0x9c, &w);
+			if (!(w & 1))
+				break;
+			cpu_relax();
+		}
+	}
+	spin_unlock_irqrestore(&gart_lock, flags);
+	if (!flushed)
+		printk("nothing to flush?\n");
+}
+EXPORT_SYMBOL_GPL(k8_flush_garts);
+

arch/x86_64/kernel/pci-gart.c

@@ -32,6 +32,7 @@
 #include <asm/kdebug.h>
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
+#include <asm/k8.h>
 
 unsigned long iommu_bus_base;	/* GART remapping area (physical) */
 static unsigned long iommu_size; 	/* size of remapping area bytes */
@@ -46,8 +47,6 @@ u32 *iommu_gatt_base; 		/* Remapping table */
    also seen with Qlogic at least). */
 int iommu_fullflush = 1;
 
-#define MAX_NB 8
-
 /* Allocation bitmap for the remapping area */ 
 static DEFINE_SPINLOCK(iommu_bitmap_lock);
 static unsigned long *iommu_gart_bitmap; /* guarded by iommu_bitmap_lock */
@@ -63,13 +62,6 @@ static u32 gart_unmapped_entry;
 #define to_pages(addr,size) \
 	(round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
 
-#define for_all_nb(dev) \
-	dev = NULL;	\
-	while ((dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1103, dev))!=NULL)
-
-static struct pci_dev *northbridges[MAX_NB];
-static u32 northbridge_flush_word[MAX_NB];
-
 #define EMERGENCY_PAGES 32 /* = 128KB */ 
 
 #ifdef CONFIG_AGP
@@ -120,44 +112,17 @@ static void free_iommu(unsigned long offset, int size)
 /* 
  * Use global flush state to avoid races with multiple flushers.
  */
-static void flush_gart(struct device *dev)
+static void flush_gart(void)
 { 
 	unsigned long flags;
-	int flushed = 0;
-	int i, max;
-
 	spin_lock_irqsave(&iommu_bitmap_lock, flags);
-	if (need_flush) { 
-		max = 0;
-		for (i = 0; i < MAX_NB; i++) {
-			if (!northbridges[i]) 
-				continue;
-			pci_write_config_dword(northbridges[i], 0x9c, 
-					       northbridge_flush_word[i] | 1); 
-			flushed++;
-			max = i;
-		}
-		for (i = 0; i <= max; i++) {
-			u32 w;
-			if (!northbridges[i])
-				continue;
-			/* Make sure the hardware actually executed the flush. */
-			for (;;) { 
-				pci_read_config_dword(northbridges[i], 0x9c, &w);
-				if (!(w & 1))
-					break;
-				cpu_relax();
-			}
-		} 
-		if (!flushed) 
-			printk("nothing to flush?\n");
+	if (need_flush) {
+		k8_flush_garts();
 		need_flush = 0;
 	} 
 	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
 } 
 
-
-
 #ifdef CONFIG_IOMMU_LEAK
 
 #define SET_LEAK(x) if (iommu_leak_tab) \
@@ -266,7 +231,7 @@ static dma_addr_t gart_map_simple(struct device *dev, char *buf,
 				 size_t size, int dir)
 {
 	dma_addr_t map = dma_map_area(dev, virt_to_bus(buf), size, dir);
-	flush_gart(dev);
+	flush_gart();
 	return map;
 }
 
@@ -351,7 +316,7 @@ static int dma_map_sg_nonforce(struct device *dev, struct scatterlist *sg,
 		s->dma_address = addr;
 		s->dma_length = s->length;
 	}
-	flush_gart(dev);
+	flush_gart();
 	return nents;
 }
 
@@ -458,13 +423,13 @@ int gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
 	if (dma_map_cont(sg, start, i, sg+out, pages, need) < 0)
 		goto error;
 	out++;
-	flush_gart(dev);
+	flush_gart();
 	if (out < nents) 
 		sg[out].dma_length = 0; 
 	return out;
 
 error:
-	flush_gart(NULL);
+	flush_gart();
 	gart_unmap_sg(dev, sg, nents, dir);
 	/* When it was forced or merged try again in a dumb way */
 	if (force_iommu || iommu_merge) {
@@ -532,10 +497,13 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	void *gatt;
 	unsigned aper_base, new_aper_base;
 	unsigned aper_size, gatt_size, new_aper_size;
-	
+	int i;
+
 	printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
 	aper_size = aper_base = info->aper_size = 0;
-	for_all_nb(dev) { 
+	dev = NULL;
+	for (i = 0; i < num_k8_northbridges; i++) {
+		dev = k8_northbridges[i];
 		new_aper_base = read_aperture(dev, &new_aper_size); 
 		if (!new_aper_base) 
 			goto nommu; 
@@ -558,11 +526,12 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 		panic("Cannot allocate GATT table"); 
 	memset(gatt, 0, gatt_size); 
 	agp_gatt_table = gatt;
-	
-	for_all_nb(dev) { 
+
+	for (i = 0; i < num_k8_northbridges; i++) {
 		u32 ctl; 
 		u32 gatt_reg; 
 
+		dev = k8_northbridges[i];
 		gatt_reg = __pa(gatt) >> 12; 
 		gatt_reg <<= 4; 
 		pci_write_config_dword(dev, 0x98, gatt_reg);
@@ -573,7 +542,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 		pci_write_config_dword(dev, 0x90, ctl); 
 	}
-	flush_gart(NULL); 
+	flush_gart();
 	
 	printk("PCI-DMA: aperture base @ %x size %u KB\n",aper_base, aper_size>>10); 
 	return 0;
@@ -607,10 +576,14 @@ static int __init pci_iommu_init(void)
 	struct agp_kern_info info;
 	unsigned long aper_size;
 	unsigned long iommu_start;
-	struct pci_dev *dev;
 	unsigned long scratch;
 	long i;
 
+	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) {
+		printk(KERN_INFO "PCI-GART: No AMD northbridge found.\n");
+		return -1;
+	}
+
 #ifndef CONFIG_AGP_AMD64
 	no_agp = 1; 
 #else
@@ -637,14 +610,6 @@ static int __init pci_iommu_init(void)
 		return -1;
 	}
 
-	i = 0;
-	for_all_nb(dev)
-		i++;
-	if (i > MAX_NB) {
-		printk(KERN_ERR "PCI-GART: Too many northbridges (%ld). Disabled\n", i);
-		return -1;
-	}
-
 	printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
 	aper_size = info.aper_size * 1024 * 1024;	
 	iommu_size = check_iommu_size(info.aper_base, aper_size); 
@@ -707,20 +672,8 @@ static int __init pci_iommu_init(void)
 	for (i = EMERGENCY_PAGES; i < iommu_pages; i++) 
 		iommu_gatt_base[i] = gart_unmapped_entry;
 
-	for_all_nb(dev) {
-		u32 flag; 
-		int cpu = PCI_SLOT(dev->devfn) - 24;
-		if (cpu >= MAX_NB)
-			continue;
-		northbridges[cpu] = dev;
-		pci_read_config_dword(dev, 0x9c, &flag); /* cache flush word */
-		northbridge_flush_word[cpu] = flag; 
-	}
-		     
-	flush_gart(NULL);
-
+	flush_gart();
 	dma_ops = &gart_dma_ops;
-
 	return 0;
 } 
 

arch/x86_64/pci/k8-bus.c

@@ -2,6 +2,7 @@
 #include <linux/pci.h>
 #include <asm/mpspec.h>
 #include <linux/cpumask.h>
+#include <asm/k8.h>
 
 /*
  * This discovers the pcibus <-> node mapping on AMD K8.
@@ -18,7 +19,6 @@
 #define NR_LDT_BUS_NUMBER_REGISTERS 3
 #define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 8) & 0xFF)
 #define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF)
-#define PCI_DEVICE_ID_K8HTCONFIG 0x1100
 
 /**
  * fill_mp_bus_to_cpumask()
@@ -28,8 +28,7 @@
 __init static int
 fill_mp_bus_to_cpumask(void)
 {
-	struct pci_dev *nb_dev = NULL;
-	int i, j;
+	int i, j, k;
 	u32 ldtbus, nid;
 	static int lbnr[3] = {
 		LDT_BUS_NUMBER_REGISTER_0,
@@ -37,8 +36,9 @@ fill_mp_bus_to_cpumask(void)
 		LDT_BUS_NUMBER_REGISTER_2
 	};
 
-	while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-			PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) {
+	cache_k8_northbridges();
+	for (k = 0; k < num_k8_northbridges; k++) {
+		struct pci_dev *nb_dev = k8_northbridges[k];
 		pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid);
 
 		for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) {

drivers/char/agp/amd64-agp.c

@@ -15,11 +15,9 @@
 #include <linux/agp_backend.h>
 #include <linux/mmzone.h>
 #include <asm/page.h>		/* PAGE_SIZE */
+#include <asm/k8.h>
 #include "agp.h"
 
-/* Will need to be increased if AMD64 ever goes >8-way. */
-#define MAX_HAMMER_GARTS   8
-
 /* PTE bits. */
 #define GPTE_VALID	1
 #define GPTE_COHERENT	2
@@ -53,28 +51,12 @@
 #define ULI_X86_64_HTT_FEA_REG		0x50
 #define ULI_X86_64_ENU_SCR_REG		0x54
 
-static int nr_garts;
-static struct pci_dev * hammers[MAX_HAMMER_GARTS];
-
 static struct resource *aperture_resource;
 static int __initdata agp_try_unsupported = 1;
 
-#define for_each_nb() for(gart_iterator=0;gart_iterator<nr_garts;gart_iterator++)
-
-static void flush_amd64_tlb(struct pci_dev *dev)
-{
-	u32 tmp;
-
-	pci_read_config_dword (dev, AMD64_GARTCACHECTL, &tmp);
-	tmp |= INVGART;
-	pci_write_config_dword (dev, AMD64_GARTCACHECTL, tmp);
-}
-
 static void amd64_tlbflush(struct agp_memory *temp)
 {
-	int gart_iterator;
-	for_each_nb()
-		flush_amd64_tlb(hammers[gart_iterator]);
+	k8_flush_garts();
 }
 
 static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
@@ -153,7 +135,7 @@ static int amd64_fetch_size(void)
 	u32 temp;
 	struct aper_size_info_32 *values;
 
-	dev = hammers[0];
+	dev = k8_northbridges[0];
 	if (dev==NULL)
 		return 0;
 
@@ -201,9 +183,6 @@ static u64 amd64_configure (struct pci_dev *hammer, u64 gatt_table)
 	tmp &= ~(DISGARTCPU | DISGARTIO);
 	pci_write_config_dword(hammer, AMD64_GARTAPERTURECTL, tmp);
 
-	/* keep CPU's coherent. */
-	flush_amd64_tlb (hammer);
-
 	return aper_base;
 }
 
@@ -222,13 +201,14 @@ static struct aper_size_info_32 amd_8151_sizes[7] =
 static int amd_8151_configure(void)
 {
 	unsigned long gatt_bus = virt_to_gart(agp_bridge->gatt_table_real);
-	int gart_iterator;
+	int i;
 
 	/* Configure AGP regs in each x86-64 host bridge. */
-	for_each_nb() {
+        for (i = 0; i < num_k8_northbridges; i++) {
 		agp_bridge->gart_bus_addr =
-				amd64_configure(hammers[gart_iterator],gatt_bus);
+				amd64_configure(k8_northbridges[i], gatt_bus);
 	}
+	k8_flush_garts();
 	return 0;
 }
 
@@ -236,12 +216,13 @@ static int amd_8151_configure(void)
 static void amd64_cleanup(void)
 {
 	u32 tmp;
-	int gart_iterator;
-	for_each_nb() {
+	int i;
+        for (i = 0; i < num_k8_northbridges; i++) {
+		struct pci_dev *dev = k8_northbridges[i];
 		/* disable gart translation */
-		pci_read_config_dword (hammers[gart_iterator], AMD64_GARTAPERTURECTL, &tmp);
+		pci_read_config_dword (dev, AMD64_GARTAPERTURECTL, &tmp);
 		tmp &= ~AMD64_GARTEN;
-		pci_write_config_dword (hammers[gart_iterator], AMD64_GARTAPERTURECTL, tmp);
+		pci_write_config_dword (dev, AMD64_GARTAPERTURECTL, tmp);
 	}
 }
 
@@ -361,17 +342,15 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
 
 static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
 {
-	struct pci_dev *loop_dev = NULL;
-	int i = 0;
-
-	/* cache pci_devs of northbridges. */
-	while ((loop_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1103, loop_dev))
-			!= NULL) {
-		if (i == MAX_HAMMER_GARTS) {
-			printk(KERN_ERR PFX "Too many northbridges for AGP\n");
-			return -1;
-		}
-		if (fix_northbridge(loop_dev, pdev, cap_ptr) < 0) {
+	int i;
+
+	if (cache_k8_northbridges() < 0)
+		return -ENODEV;
+
+	i = 0;
+	for (i = 0; i < num_k8_northbridges; i++) {
+		struct pci_dev *dev = k8_northbridges[i];
+		if (fix_northbridge(dev, pdev, cap_ptr) < 0) {
 			printk(KERN_ERR PFX "No usable aperture found.\n");
 #ifdef __x86_64__
 			/* should port this to i386 */
@@ -379,10 +358,8 @@ static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
 #endif
 			return -1;
 		}
-		hammers[i++] = loop_dev;
 	}
-		nr_garts = i;
-	return i == 0 ? -1 : 0;
+	return 0;
 }
 
 /* Handle AMD 8151 quirks */
@@ -450,7 +427,7 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
 	}
 
 	/* shadow x86-64 registers into ULi registers */
-	pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &httfea);
+	pci_read_config_dword (k8_northbridges[0], AMD64_GARTAPERTUREBASE, &httfea);
 
 	/* if x86-64 aperture base is beyond 4G, exit here */
 	if ((httfea & 0x7fff) >> (32 - 25))
@@ -513,7 +490,7 @@ static int __devinit nforce3_agp_init(struct pci_dev *pdev)
 	pci_write_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, tmp);
 
 	/* shadow x86-64 registers into NVIDIA registers */
-	pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &apbase);
+	pci_read_config_dword (k8_northbridges[0], AMD64_GARTAPERTUREBASE, &apbase);
 
 	/* if x86-64 aperture base is beyond 4G, exit here */
 	if ( (apbase & 0x7fff) >> (32 - 25) ) {
@@ -754,10 +731,6 @@ static struct pci_driver agp_amd64_pci_driver = {
 int __init agp_amd64_init(void)
 {
 	int err = 0;
-	static struct pci_device_id amd64nb[] = {
-		{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
-		{ },
-	};
 
 	if (agp_off)
 		return -EINVAL;
@@ -774,7 +747,7 @@ int __init agp_amd64_init(void)
 		}
 
 		/* First check that we have at least one AMD64 NB */
-		if (!pci_dev_present(amd64nb))
+		if (!pci_dev_present(k8_nb_ids))
 			return -ENODEV;
 
 		/* Look for any AGP bridge */

include/asm-i386/k8.h

+#include <asm-x86_64/k8.h>

include/asm-x86_64/k8.h

+#ifndef _ASM_K8_H
+#define _ASM_K8_H 1
+
+#include <linux/pci.h>
+
+extern struct pci_device_id k8_nb_ids[];
+
+extern int early_is_k8_nb(u32 value);
+extern struct pci_dev **k8_northbridges;
+extern int num_k8_northbridges;
+extern int cache_k8_northbridges(void);
+extern void k8_flush_garts(void);
+
+#endif