提交 9c855975 编写于 作者: S Suresh Reddy 提交者: David S. Miller

be2net: make SET_LOOPBACK_MODE cmd asynchrounous

The SET_LOOPBACK_MODE command is always issued from ethtool only in a
process context. So, while waiting for the cmd to complete, the driver
can sleep instead of holding spin_lock_bh() on the mcc_lock. This is done
by calling be_mcc_notify() instead of be_mcc_notify_wait() (that returns
only after the cmd completes while the MCCQ is locked).
Signed-off-by: NSuresh Reddy <suresh.reddy@avagotech.com>
Signed-off-by: NSathya Perla <sathya.perla@avagotech.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 8af65c2f
......@@ -172,6 +172,12 @@ static void be_async_cmd_process(struct be_adapter *adapter,
return;
}
if (opcode == OPCODE_LOWLEVEL_SET_LOOPBACK_MODE &&
subsystem == CMD_SUBSYSTEM_LOWLEVEL) {
complete(&adapter->et_cmd_compl);
return;
}
if ((opcode == OPCODE_COMMON_WRITE_FLASHROM ||
opcode == OPCODE_COMMON_WRITE_OBJECT) &&
subsystem == CMD_SUBSYSTEM_COMMON) {
......@@ -2600,7 +2606,7 @@ int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
wrb = wrb_from_mccq(adapter);
if (!wrb) {
status = -EBUSY;
goto err;
goto err_unlock;
}
req = embedded_payload(wrb);
......@@ -2614,8 +2620,19 @@ int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
req->loopback_type = loopback_type;
req->loopback_state = enable;
status = be_mcc_notify_wait(adapter);
err:
status = be_mcc_notify(adapter);
if (status)
goto err_unlock;
spin_unlock_bh(&adapter->mcc_lock);
if (!wait_for_completion_timeout(&adapter->et_cmd_compl,
msecs_to_jiffies(SET_LB_MODE_TIMEOUT)))
status = -ETIMEDOUT;
return status;
err_unlock:
spin_unlock_bh(&adapter->mcc_lock);
return status;
}
......
......@@ -1495,6 +1495,8 @@ struct be_cmd_resp_acpi_wol_magic_config_v1 {
#define BE_PME_D3COLD_CAP 0x80
/********************** LoopBack test *********************/
#define SET_LB_MODE_TIMEOUT 12000
struct be_cmd_req_loopback_test {
struct be_cmd_req_hdr hdr;
u32 loopback_type;
......
......@@ -847,10 +847,21 @@ static int be_test_ddr_dma(struct be_adapter *adapter)
static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type,
u64 *status)
{
be_cmd_set_loopback(adapter, adapter->hba_port_num, loopback_type, 1);
int ret;
ret = be_cmd_set_loopback(adapter, adapter->hba_port_num,
loopback_type, 1);
if (ret)
return ret;
*status = be_cmd_loopback_test(adapter, adapter->hba_port_num,
loopback_type, 1500, 2, 0xabc);
be_cmd_set_loopback(adapter, adapter->hba_port_num, BE_NO_LOOPBACK, 1);
ret = be_cmd_set_loopback(adapter, adapter->hba_port_num,
BE_NO_LOOPBACK, 1);
if (ret)
return ret;
return *status;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册