提交 9c517e6c 编写于 作者: T Todd Poynor 提交者: Thomas Gleixner

[MTD] maps: Add mapping driver for PQ2FADS boards.

From: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NTodd Poynor <tpoynor@mvista.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
上级 81e39cf0
# drivers/mtd/maps/Kconfig
# $Id: Kconfig,v 1.55 2005/07/02 01:53:24 tpoynor Exp $
# $Id: Kconfig,v 1.58 2005/09/14 19:14:13 tpoynor Exp $
menu "Mapping drivers for chip access"
depends on MTD!=n
......@@ -520,6 +520,12 @@ config MTD_MPC1211
This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
If you have such a board, say 'Y'.
config MTD_PQ2FADS
tristate "JEDEC flash SIMM mapped on PQ2FADS and 8272ADS boards"
depends on (ADS8272 || PQ2FADS) && MTD_PARTITIONS && MTD_JEDECPROBE && MTD_PHYSMAP && MTD_CFI_GEOMETRY && MTD_CFI_INTELEXT
help
This enables access to flash SIMM on PQ2FADS-like boards
config MTD_OMAP_NOR
tristate "TI OMAP board mappings"
depends on MTD_CFI && ARCH_OMAP
......
#
# linux/drivers/maps/Makefile
#
# $Id: Makefile.common,v 1.30 2005/07/02 01:53:24 tpoynor Exp $
# $Id: Makefile.common,v 1.31 2005/09/14 19:14:13 tpoynor Exp $
ifeq ($(CONFIG_MTD_COMPLEX_MAPPINGS),y)
obj-$(CONFIG_MTD) += map_funcs.o
......@@ -70,3 +70,4 @@ obj-$(CONFIG_MTD_DMV182) += dmv182.o
obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_PQ2FADS) += pq2fads.o
/*
* drivers/mtd/maps/pq2fads.c
*
* Mapping for the flash SIMM on 8272ADS and PQ2FADS board
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
*
* 2005 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/ppcboot.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
/*
NOTE: bank width and interleave relative to the installed flash
should have been chosen within MTD_CFI_GEOMETRY options.
*/
#define PQ2FADS_BANK_WIDTH 4
static struct mtd_partition pq2fads_partitions[] = {
{
#ifdef CONFIG_ADS8272
.name = "HRCW",
.size = 0x40000,
.offset = 0,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "User FS",
.size = 0x5c0000,
.offset = 0x40000,
#else
.name = "User FS",
.size = 0x600000,
.offset = 0,
#endif
}, {
.name = "uImage",
.size = 0x100000,
.offset = 0x600000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "bootloader",
.size = 0x40000,
.offset = 0x700000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "bootloader env",
.size = 0x40000,
.offset = 0x740000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}
};
/* pointer to MPC885ADS board info data */
extern unsigned char __res[];
static int __init init_pq2fads_mtd(void)
{
bd_t *bd = (bd_t *)__res;
physmap_configure(bd->bi_flashstart, bd->bi_flashsize, PQ2FADS_BANK_WIDTH, NULL);
physmap_set_partitions(pq2fads_partitions,
sizeof (pq2fads_partitions) /
sizeof (pq2fads_partitions[0]));
return 0;
}
static void __exit cleanup_pq2fads_mtd(void)
{
}
module_init(init_pq2fads_mtd);
module_exit(cleanup_pq2fads_mtd);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MTD map and partitions for MPC8272ADS boards");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册