ath9k_htc: Fix warning on device removal

The commit "ath9k_hw: warn if we cannot change the power to the chip"
introduced a new warning to indicate chip powerup failures, but this
is not required for devices that have been removed. Handle USB device
removal properly by checking for unplugged status.

For PCI devices, this warning will still be seen when the card is pulled
out, not sure how to check for card removal.
Signed-off-by: NSujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/eeprom.h

@@ -23,8 +23,6 @@
 #include <net/cfg80211.h>
 #include "ar9003_eeprom.h"
 
-#define AH_USE_EEPROM   0x1
-
 #ifdef __BIG_ENDIAN
 #define AR5416_EEPROM_MAGIC 0x5aa5
 #else

drivers/net/wireless/ath/ath9k/hif_usb.c

@@ -993,16 +993,16 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
 {
 	struct usb_device *udev = interface_to_usbdev(interface);
 	struct hif_device_usb *hif_dev = usb_get_intfdata(interface);
+	bool unplugged = (udev->state == USB_STATE_NOTATTACHED) ? true : false;
 
 	if (hif_dev) {
-		ath9k_htc_hw_deinit(hif_dev->htc_handle,
-		    (udev->state == USB_STATE_NOTATTACHED) ? true : false);
+		ath9k_htc_hw_deinit(hif_dev->htc_handle, unplugged);
 		ath9k_htc_hw_free(hif_dev->htc_handle);
 		ath9k_hif_usb_dev_deinit(hif_dev);
 		usb_set_intfdata(interface, NULL);
 	}
 
-	if (hif_dev->flags & HIF_USB_START)
+	if (!unplugged && (hif_dev->flags & HIF_USB_START))
 		ath9k_hif_usb_reboot(udev);
 
 	kfree(hif_dev);

drivers/net/wireless/ath/ath9k/htc.h

@@ -339,9 +339,8 @@ void ath_htc_cancel_btcoex_work(struct ath9k_htc_priv *priv);
 #define OP_ASSOCIATED		   BIT(7)
 #define OP_ENABLE_BEACON	   BIT(8)
 #define OP_LED_DEINIT		   BIT(9)
-#define OP_UNPLUGGED		   BIT(10)
-#define OP_BT_PRIORITY_DETECTED	   BIT(11)
-#define OP_BT_SCAN		   BIT(12)
+#define OP_BT_PRIORITY_DETECTED    BIT(10)
+#define OP_BT_SCAN                 BIT(11)
 
 struct ath9k_htc_priv {
 	struct device *dev;

drivers/net/wireless/ath/ath9k/htc_drv_init.c

@@ -851,9 +851,6 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 	if (ret)
 		goto err_init;
 
-	/* The device may have been unplugged earlier. */
-	priv->op_flags &= ~OP_UNPLUGGED;
-
 	ret = ath9k_init_device(priv, devid, product, drv_info);
 	if (ret)
 		goto err_init;
@@ -873,7 +870,7 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug)
 
 		/* Check if the device has been yanked out. */
 		if (hotunplug)
-			htc_handle->drv_priv->op_flags |= OP_UNPLUGGED;
+			htc_handle->drv_priv->ah->ah_flags |= AH_UNPLUGGED;
 
 		ath9k_deinit_device(htc_handle->drv_priv);
 		ath9k_deinit_wmi(htc_handle->drv_priv);

drivers/net/wireless/ath/ath9k/hw.c

@@ -1615,7 +1615,9 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 	 * simply keep the ATH_DBG_WARN_ON_ONCE() but make
 	 * ath9k_hw_setpower() return type void.
 	 */
-	ATH_DBG_WARN_ON_ONCE(!status);
+
+	if (!(ah->ah_flags & AH_UNPLUGGED))
+		ATH_DBG_WARN_ON_ONCE(!status);
 
 	return status;
 }

drivers/net/wireless/ath/ath9k/hw.h

@@ -646,6 +646,10 @@ struct ath_nf_limits {
 	s16 nominal;
 };
 
+/* ah_flags */
+#define AH_USE_EEPROM   0x1
+#define AH_UNPLUGGED    0x2 /* The card has been physically removed. */
+
 struct ath_hw {
 	struct ieee80211_hw *hw;
 	struct ath_common common;

drivers/net/wireless/ath/ath9k/wmi.c

@@ -250,7 +250,7 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 	int time_left, ret = 0;
 	unsigned long flags;
 
-	if (wmi->drv_priv->op_flags & OP_UNPLUGGED)
+	if (ah->ah_flags & AH_UNPLUGGED)
 		return 0;
 
 	skb = alloc_skb(headroom + cmd_len, GFP_ATOMIC);