提交 96dd22ac 编写于 作者: J Johannes Berg 提交者: John W. Linville

mac80211: inform driver of basic rateset

Drivers need to know the basic rateset to be able to configure
the ACK/CTS programming in hardware correctly.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 ccd7b362
......@@ -160,6 +160,7 @@ struct ieee80211_low_level_stats {
* @BSS_CHANGED_ERP_PREAMBLE: preamble changed
* @BSS_CHANGED_ERP_SLOT: slot timing changed
* @BSS_CHANGED_HT: 802.11n parameters changed
* @BSS_CHANGED_BASIC_RATES: Basic rateset changed
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
......@@ -167,6 +168,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_ERP_PREAMBLE = 1<<2,
BSS_CHANGED_ERP_SLOT = 1<<3,
BSS_CHANGED_HT = 1<<4,
BSS_CHANGED_BASIC_RATES = 1<<5,
};
/**
......@@ -187,6 +189,9 @@ enum ieee80211_bss_change {
* @assoc_ht: association in HT mode
* @ht_conf: ht capabilities
* @ht_bss_conf: ht extended capabilities
* @basic_rates: bitmap of basic rates, each bit stands for an
* index into the rate table configured by the driver in
* the current band.
*/
struct ieee80211_bss_conf {
/* association related data */
......@@ -200,6 +205,7 @@ struct ieee80211_bss_conf {
u16 beacon_int;
u16 assoc_capability;
u64 timestamp;
u64 basic_rates;
/* ht related data */
bool assoc_ht;
struct ieee80211_ht_info *ht_conf;
......
......@@ -433,11 +433,6 @@ struct ieee80211_sub_if_data {
int drop_unencrypted;
/*
* basic rates of this AP or the AP we're associated to
*/
u64 basic_rates;
/* Fragment table for host-based reassembly */
struct ieee80211_fragment_entry fragments[IEEE80211_FRAGMENT_MAX];
unsigned int fragment_next;
......@@ -1017,6 +1012,8 @@ void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
void ieee802_11_parse_elems(u8 *start, size_t len,
struct ieee802_11_elems *elems);
int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
u64 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band);
#ifdef CONFIG_MAC80211_NOINLINE
#define debug_noinline noinline
......
......@@ -144,7 +144,9 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
ieee80211_setup_sdata(sdata, type);
/* reset some values that shouldn't be kept across type changes */
sdata->basic_rates = 0;
sdata->bss_conf.basic_rates =
ieee80211_mandatory_rates(sdata->local,
sdata->local->hw.conf.channel->band);
sdata->drop_unencrypted = 0;
return 0;
......
......@@ -710,6 +710,12 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
ieee80211_led_assoc(local, 1);
sdata->bss_conf.assoc = 1;
/*
* For now just always ask the driver to update the basic rateset
* when we have associated, we aren't checking whether it actually
* changed or not.
*/
changed |= BSS_CHANGED_BASIC_RATES;
ieee80211_bss_info_change_notify(sdata, changed);
netif_tx_start_all_queues(sdata->dev);
......@@ -1296,7 +1302,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
}
sta->supp_rates[local->hw.conf.channel->band] = rates;
sdata->basic_rates = basic_rates;
sdata->bss_conf.basic_rates = basic_rates;
/* cf. IEEE 802.11 9.2.12 */
if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
......@@ -1453,34 +1459,6 @@ static int ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
return res;
}
static u64 ieee80211_sta_get_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band)
{
struct ieee80211_supported_band *sband;
struct ieee80211_rate *bitrates;
u64 mandatory_rates;
enum ieee80211_rate_flags mandatory_flag;
int i;
sband = local->hw.wiphy->bands[band];
if (!sband) {
WARN_ON(1);
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
}
if (band == IEEE80211_BAND_2GHZ)
mandatory_flag = IEEE80211_RATE_MANDATORY_B;
else
mandatory_flag = IEEE80211_RATE_MANDATORY_A;
bitrates = sband->bitrates;
mandatory_rates = 0;
for (i = 0; i < sband->n_bitrates; i++)
if (bitrates[i].flags & mandatory_flag)
mandatory_rates |= BIT(i);
return mandatory_rates;
}
static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len,
......@@ -1522,7 +1500,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
prev_rates = sta->supp_rates[band];
/* make sure mandatory rates are always added */
sta->supp_rates[band] = supp_rates |
ieee80211_sta_get_mandatory_rates(local, band);
ieee80211_mandatory_rates(local, band);
#ifdef CONFIG_MAC80211_IBSS_DEBUG
if (sta->supp_rates[band] != prev_rates)
......@@ -2361,7 +2339,7 @@ struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
/* make sure mandatory rates are always added */
sta->supp_rates[band] = supp_rates |
ieee80211_sta_get_mandatory_rates(local, band);
ieee80211_mandatory_rates(local, band);
rate_control_rate_init(sta, local);
......
......@@ -153,7 +153,7 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, int group_addr,
if (r->bitrate > txrate->bitrate)
break;
if (tx->sdata->basic_rates & BIT(i))
if (tx->sdata->bss_conf.basic_rates & BIT(i))
rate = r->bitrate;
switch (sband->band) {
......@@ -594,7 +594,7 @@ ieee80211_tx_h_misc(struct ieee80211_tx_data *tx)
for (idx = 0; idx < sband->n_bitrates; idx++) {
if (sband->bitrates[idx].bitrate > rate->bitrate)
continue;
if (tx->sdata->basic_rates & BIT(idx) &&
if (tx->sdata->bss_conf.basic_rates & BIT(idx) &&
(baserate < 0 ||
(sband->bitrates[baserate].bitrate
< sband->bitrates[idx].bitrate)))
......
......@@ -640,3 +640,31 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
return ret;
}
u64 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band)
{
struct ieee80211_supported_band *sband;
struct ieee80211_rate *bitrates;
u64 mandatory_rates;
enum ieee80211_rate_flags mandatory_flag;
int i;
sband = local->hw.wiphy->bands[band];
if (!sband) {
WARN_ON(1);
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
}
if (band == IEEE80211_BAND_2GHZ)
mandatory_flag = IEEE80211_RATE_MANDATORY_B;
else
mandatory_flag = IEEE80211_RATE_MANDATORY_A;
bitrates = sband->bitrates;
mandatory_rates = 0;
for (i = 0; i < sband->n_bitrates; i++)
if (bitrates[i].flags & mandatory_flag)
mandatory_rates |= BIT(i);
return mandatory_rates;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册