remove ide-scsi

As planed, this removes ide-scsi.

The 2.6 kernel supports direct writing to ide CD drives, which
eliminates the need for ide-scsi. ide-scsi has been unmaintained and
marked as deprecated.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James.Bottomley@HansenPartnership.com
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Documentation/feature-removal-schedule.txt

@@ -310,15 +310,6 @@ Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
 
 ---------------------------
 
-What: ide-scsi (BLK_DEV_IDESCSI)
-When: 2.6.29
-Why:  The 2.6 kernel supports direct writing to ide CD drives, which
-      eliminates the need for ide-scsi. The new method is more
-      efficient in every way.
-Who:  FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
-
----------------------------
-
 What:	i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
 When:	2.6.29 (ideally) or 2.6.30 (more likely)
 Why:	Deprecated by the new (standard) device driver binding model. Use

MAINTAINERS

@@ -2146,11 +2146,6 @@ M:	Gadi Oxman <gadio@netvision.net.il>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
-IDE-SCSI DRIVER
-L:	linux-ide@vger.kernel.org
-L:	linux-scsi@vger.kernel.org
-S:	Orphan
-
 IDLE-I7300
 P:	Andy Henroid
 M:	andrew.d.henroid@intel.com

drivers/ide/Kconfig

@@ -185,23 +185,6 @@ config BLK_DEV_IDETAPE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide-tape.
 
-config BLK_DEV_IDESCSI
-	tristate "SCSI emulation support (DEPRECATED)"
-	depends on SCSI
-	select IDE_ATAPI
-	---help---
-	  WARNING: ide-scsi is no longer needed for cd writing applications!
-	  The 2.6 kernel supports direct writing to ide-cd, which eliminates
-	  the need for ide-scsi + the entire scsi stack just for writing a
-	  cd. The new method is more efficient in every way.
-
-	  This will provide SCSI host adapter emulation for IDE ATAPI devices,
-	  and will allow you to use a SCSI device driver instead of a native
-	  ATAPI driver.
-
-	  If both this SCSI emulation and native ATAPI support are compiled
-	  into the kernel, the native support will be used.
-
 config BLK_DEV_IDEACPI
 	bool "IDE ACPI support"
 	depends on ACPI

drivers/scsi/Kconfig

@@ -21,7 +21,7 @@ config SCSI
 	  You also need to say Y here if you have a device which speaks
 	  the SCSI protocol.  Examples of this include the parallel port
 	  version of the IOMEGA ZIP drive, USB storage devices, Fibre
-	  Channel, FireWire storage and the IDE-SCSI emulation driver.
+	  Channel, and FireWire storage.
 
 	  To compile this driver as a module, choose M here and read
 	  <file:Documentation/scsi/scsi.txt>.
@@ -101,9 +101,9 @@ config CHR_DEV_OSST
 	---help---
 	  The OnStream SC-x0 SCSI tape drives cannot be driven by the
 	  standard st driver, but instead need this special osst driver and
-	  use the  /dev/osstX char device nodes (major 206).  Via usb-storage
-	  and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives
-	  as well.  Note that there is also a second generation of OnStream
+	  use the  /dev/osstX char device nodes (major 206).  Via usb-storage,
+	  you may be able to drive the USB-x0 and DI-x0 drives as well.
+	  Note that there is also a second generation of OnStream
 	  tape drives (ADR-x0) that supports the standard SCSI-2 commands for
 	  tapes (QIC-157) and can be driven by the standard driver st.
 	  For more information, you may have a look at the SCSI-HOWTO

drivers/scsi/Makefile

@@ -105,7 +105,6 @@ obj-$(CONFIG_SCSI_GDTH)		+= gdth.o
 obj-$(CONFIG_SCSI_INITIO)	+= initio.o
 obj-$(CONFIG_SCSI_INIA100)	+= a100u2w.o
 obj-$(CONFIG_SCSI_QLOGICPTI)	+= qlogicpti.o
-obj-$(CONFIG_BLK_DEV_IDESCSI)	+= ide-scsi.o
 obj-$(CONFIG_SCSI_MESH)		+= mesh.o
 obj-$(CONFIG_SCSI_MAC53C94)	+= mac53c94.o
 obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o