Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits)
  [ARM] 5171/1: ep93xx: fix compilation of modules using clocks
  [ARM] 5133/2: at91sam9g20 defconfig file
  [ARM] 5130/4: Support for the at91sam9g20
  [ARM] 5160/1: IOP3XX: gpio/gpiolib support
  [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits.
  [ARM] 5084/1: zylonite: Register AC97 device
  [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model
  [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers
  [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting
  [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state
  [ARM] 5144/1: pxaficp_ir: cleanup includes
  [ARM] pxa: remove pxa_set_cken()
  [ARM] pxa: allow clk aliases
  [ARM] Feroceon: don't disable BPU on boot
  [ARM] Orion: LED support for HP mv2120
  [ARM] Orion: add RD88F5181L-FXO support
  [ARM] Orion: add RD88F5181L-GE support
  [ARM] Orion: add Netgear WNR854T support
  [ARM] s3c2410_defconfig: update for current build
  [ARM] Acer n30: Minor style and indentation fixes.
  ...

Documentation/kernel-parameters.txt

@@ -1242,6 +1242,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	mtdparts=	[MTD]
 			See drivers/mtd/cmdlinepart.c.
 
+	mtdset=		[ARM]
+			ARM/S3C2412 JIVE boot control
+
+			See arch/arm/mach-s3c2412/mach-jive.c
+
 	mtouchusb.raw_coordinates=
 			[HW] Make the MicroTouch USB driver use raw coordinates
 			('y', default) or cooked coordinates ('n')

arch/arm/Kconfig

@@ -24,6 +24,9 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
+config HAVE_PWM
+	bool
+
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
@@ -86,6 +89,11 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	bool
+	depends on !SMP
+	default y
+
 config LOCKDEP_SUPPORT
 	bool
 	default y
@@ -149,6 +157,10 @@ config FIQ
 config ARCH_MTD_XIP
 	bool
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	bool
+	def_bool y
+
 if OPROFILE
 
 config OPROFILE_ARMV6
@@ -234,13 +246,6 @@ config ARCH_CLPS711X
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
-config ARCH_CO285
-	bool "Co-EBSA285"
-	select FOOTBRIDGE
-	select FOOTBRIDGE_ADDIN
-	help
-	  Support for Intel's EBSA285 companion chip.
-
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select ISA
@@ -301,6 +306,8 @@ config ARCH_IOP32X
 	depends on MMU
 	select PLAT_IOP
 	select PCI
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -310,6 +317,8 @@ config ARCH_IOP33X
 	depends on MMU
 	select PLAT_IOP
 	select PCI
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -349,6 +358,16 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_KIRKWOOD
+	bool "Marvell Kirkwood"
+	select PCI
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the following Marvell Kirkwood series SoCs:
+	  88F6180, 88F6192 and 88F6281.
+
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
 	select GENERIC_GPIO
@@ -367,9 +386,31 @@ config ARCH_NS9XXX
 
 	  <http://www.digi.com/products/microprocessors/index.jsp>
 
+config ARCH_LOKI
+	bool "Marvell Loki (88RC8480)"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the Marvell Loki (88RC8480) SoC.
+
+config ARCH_MV78XX0
+	bool "Marvell MV78xx0"
+	select PCI
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the following Marvell MV78xx0 series SoCs:
+	  MV781x0, MV782x0.
+
 config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	select ARCH_MTD_XIP
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -383,7 +424,8 @@ config ARCH_ORION5X
 	select PLAT_ORION
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
+	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+	  Orion-2 (5281).
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
@@ -408,6 +450,7 @@ config ARCH_RPC
 	select FIQ
 	select TIMER_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
+	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select NO_IOPORT
 	help
@@ -504,6 +547,10 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-loki/Kconfig"
+
+source "arch/arm/mach-mv78xx0/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
@@ -516,6 +563,8 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
@@ -705,27 +754,6 @@ config PREEMPT
 	  Say Y here if you are building a kernel for a desktop, embedded
 	  or real-time system.  Say N if you are unsure.
 
-config NO_IDLE_HZ
-	bool "Dynamic tick timer"
-	depends on !GENERIC_CLOCKEVENTS
-	help
-	  Select this option if you want to disable continuous timer ticks
-	  and have them programmed to occur as required. This option saves
-	  power as the system can remain in idle state for longer.
-
-	  By default dynamic tick is disabled during the boot, and can be
-	  manually enabled with:
-
-	    echo 1 > /sys/devices/system/timer/timer0/dyn_tick
-
-	  Alternatively, if you want dynamic tick automatically enabled
-	  during boot, pass "dyntick=enable" via the kernel command string.
-
-	  Please note that dynamic tick may affect the accuracy of
-	  timekeeping on some platforms depending on the implementation.
-	  Currently at least OMAP, PXA2xx and SA11x0 platforms are known
-	  to have accurate timekeeping with dynamic tick.
-
 config HZ
 	int
 	default 128 if ARCH_L7200
@@ -791,7 +819,7 @@ source "mm/Kconfig"
 
 config LEDS
 	bool "Timer and CPU usage LEDs"
-	depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
+	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
 		   ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \

arch/arm/Makefile

@@ -100,8 +100,6 @@ textofs-y	:= 0x00008000
   incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
   incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
- machine-$(CONFIG_ARCH_CO285)	   := footbridge
-  incdir-$(CONFIG_ARCH_CO285)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -135,11 +133,15 @@ endif
  machine-$(CONFIG_ARCH_NETX)	   := netx
  machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
+ machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
   incdir-$(CONFIG_ARCH_MXC)	   := mxc
+ machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
+ machine-$(CONFIG_ARCH_LOKI)       := loki
+ machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -190,8 +192,6 @@ core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 core-$(CONFIG_ARCH_MXC)		+= arch/arm/plat-mxc/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
-drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/
-drivers-$(CONFIG_ARCH_L7200)	+= drivers/acorn/char/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 

arch/arm/boot/compressed/head.S

@@ -623,8 +623,8 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		b	__armv4_mmu_cache_flush
 
-		.word	0x56055310		@ Feroceon
-		.word	0xfffffff0
+		.word	0x56050000		@ Feroceon
+		.word	0xff0f0000
 		b	__armv4_mmu_cache_on
 		b	__armv4_mmu_cache_off
 		b	__armv5tej_mmu_cache_flush

arch/arm/common/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-y				+= rtctime.o
 obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ARM_VIC)		+= vic.o
 obj-$(CONFIG_ICST525)		+= icst525.o

arch/arm/common/rtctime.c

-/*
- *  linux/arch/arm/common/rtctime.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions Ltd.
- *  Based on sa1100-rtc.c, Nils Faerber, CIH, Nicolas Pitre.
- *  Based on rtc.c by Paul Gortmaker
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/miscdevice.h>
-#include <linux/spinlock.h>
-#include <linux/capability.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-
-#include <asm/rtc.h>
-
-static DECLARE_WAIT_QUEUE_HEAD(rtc_wait);
-static struct fasync_struct *rtc_async_queue;
-
-/*
- * rtc_lock protects rtc_irq_data
- */
-static DEFINE_SPINLOCK(rtc_lock);
-static unsigned long rtc_irq_data;
-
-/*
- * rtc_sem protects rtc_inuse and rtc_ops
- */
-static DEFINE_MUTEX(rtc_mutex);
-static unsigned long rtc_inuse;
-static struct rtc_ops *rtc_ops;
-
-#define rtc_epoch 1900UL
-
-/*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
- */
-void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
-{
-	unsigned long next_time;
-	unsigned long now_time;
-
-	next->tm_year = now->tm_year;
-	next->tm_mon = now->tm_mon;
-	next->tm_mday = now->tm_mday;
-	next->tm_hour = alrm->tm_hour;
-	next->tm_min = alrm->tm_min;
-	next->tm_sec = alrm->tm_sec;
-
-	rtc_tm_to_time(now, &now_time);
-	rtc_tm_to_time(next, &next_time);
-
-	if (next_time < now_time) {
-		/* Advance one day */
-		next_time += 60 * 60 * 24;
-		rtc_time_to_tm(next_time, next);
-	}
-}
-EXPORT_SYMBOL(rtc_next_alarm_time);
-
-static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
-{
-	memset(tm, 0, sizeof(struct rtc_time));
-	return ops->read_time(tm);
-}
-
-static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
-{
-	int ret;
-
-	ret = rtc_valid_tm(tm);
-	if (ret == 0)
-		ret = ops->set_time(tm);
-
-	return ret;
-}
-
-static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-{
-	int ret = -EINVAL;
-	if (ops->read_alarm) {
-		memset(alrm, 0, sizeof(struct rtc_wkalrm));
-		ret = ops->read_alarm(alrm);
-	}
-	return ret;
-}
-
-static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
-{
-	int ret = -EINVAL;
-	if (ops->set_alarm)
-		ret = ops->set_alarm(alrm);
-	return ret;
-}
-
-void rtc_update(unsigned long num, unsigned long events)
-{
-	spin_lock(&rtc_lock);
-	rtc_irq_data = (rtc_irq_data + (num << 8)) | events;
-	spin_unlock(&rtc_lock);
-
-	wake_up_interruptible(&rtc_wait);
-	kill_fasync(&rtc_async_queue, SIGIO, POLL_IN);
-}
-EXPORT_SYMBOL(rtc_update);
-
-
-static ssize_t
-rtc_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	unsigned long data;
-	ssize_t ret;
-
-	if (count < sizeof(unsigned long))
-		return -EINVAL;
-
-	add_wait_queue(&rtc_wait, &wait);
-	do {
-		__set_current_state(TASK_INTERRUPTIBLE);
-
-		spin_lock_irq(&rtc_lock);
-		data = rtc_irq_data;
-		rtc_irq_data = 0;
-		spin_unlock_irq(&rtc_lock);
-
-		if (data != 0) {
-			ret = 0;
-			break;
-		}
-		if (file->f_flags & O_NONBLOCK) {
-			ret = -EAGAIN;
-			break;
-		}
-		if (signal_pending(current)) {
-			ret = -ERESTARTSYS;
-			break;
-		}
-		schedule();
-	} while (1);
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&rtc_wait, &wait);
-
-	if (ret == 0) {
-		ret = put_user(data, (unsigned long __user *)buf);
-		if (ret == 0)
-			ret = sizeof(unsigned long);
-	}
-	return ret;
-}
-
-static unsigned int rtc_poll(struct file *file, poll_table *wait)
-{
-	unsigned long data;
-
-	poll_wait(file, &rtc_wait, wait);
-
-	spin_lock_irq(&rtc_lock);
-	data = rtc_irq_data;
-	spin_unlock_irq(&rtc_lock);
-
-	return data != 0 ? POLLIN | POLLRDNORM : 0;
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
-{
-	struct rtc_ops *ops = file->private_data;
-	struct rtc_time tm;
-	struct rtc_wkalrm alrm;
-	void __user *uarg = (void __user *)arg;
-	int ret = -EINVAL;
-
-	switch (cmd) {
-	case RTC_ALM_READ:
-		ret = rtc_arm_read_alarm(ops, &alrm);
-		if (ret)
-			break;
-		ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
-		if (ret)
-			ret = -EFAULT;
-		break;
-
-	case RTC_ALM_SET:
-		ret = copy_from_user(&alrm.time, uarg, sizeof(tm));
-		if (ret) {
-			ret = -EFAULT;
-			break;
-		}
-		alrm.enabled = 0;
-		alrm.pending = 0;
-		alrm.time.tm_mday = -1;
-		alrm.time.tm_mon = -1;
-		alrm.time.tm_year = -1;
-		alrm.time.tm_wday = -1;
-		alrm.time.tm_yday = -1;
-		alrm.time.tm_isdst = -1;
-		ret = rtc_arm_set_alarm(ops, &alrm);
-		break;
-
-	case RTC_RD_TIME:
-		ret = rtc_arm_read_time(ops, &tm);
-		if (ret)
-			break;
-		ret = copy_to_user(uarg, &tm, sizeof(tm));
-		if (ret)
-			ret = -EFAULT;
-		break;
-
-	case RTC_SET_TIME:
-		if (!capable(CAP_SYS_TIME)) {
-			ret = -EACCES;
-			break;
-		}
-		ret = copy_from_user(&tm, uarg, sizeof(tm));
-		if (ret) {
-			ret = -EFAULT;
-			break;
-		}
-		ret = rtc_arm_set_time(ops, &tm);
-		break;
-
-	case RTC_EPOCH_SET:
-#ifndef rtc_epoch
-		/*
-		 * There were no RTC clocks before 1900.
-		 */
-		if (arg < 1900) {
-			ret = -EINVAL;
-			break;
-		}
-		if (!capable(CAP_SYS_TIME)) {
-			ret = -EACCES;
-			break;
-		}
-		rtc_epoch = arg;
-		ret = 0;
-#endif
-		break;
-
-	case RTC_EPOCH_READ:
-		ret = put_user(rtc_epoch, (unsigned long __user *)uarg);
-		break;
-
-	case RTC_WKALM_SET:
-		ret = copy_from_user(&alrm, uarg, sizeof(alrm));
-		if (ret) {
-			ret = -EFAULT;
-			break;
-		}
-		ret = rtc_arm_set_alarm(ops, &alrm);
-		break;
-
-	case RTC_WKALM_RD:
-		ret = rtc_arm_read_alarm(ops, &alrm);
-		if (ret)
-			break;
-		ret = copy_to_user(uarg, &alrm, sizeof(alrm));
-		if (ret)
-			ret = -EFAULT;
-		break;
-
-	default:
-		if (ops->ioctl)
-			ret = ops->ioctl(cmd, arg);
-		break;
-	}
-	return ret;
-}
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	int ret;
-
-	mutex_lock(&rtc_mutex);
-
-	if (rtc_inuse) {
-		ret = -EBUSY;
-	} else if (!rtc_ops || !try_module_get(rtc_ops->owner)) {
-		ret = -ENODEV;
-	} else {
-		file->private_data = rtc_ops;
-
-		ret = rtc_ops->open ? rtc_ops->open() : 0;
-		if (ret == 0) {
-			spin_lock_irq(&rtc_lock);
-			rtc_irq_data = 0;
-			spin_unlock_irq(&rtc_lock);
-
-			rtc_inuse = 1;
-		}
-	}
-	mutex_unlock(&rtc_mutex);
-
-	return ret;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-	struct rtc_ops *ops = file->private_data;
-
-	if (ops->release)
-		ops->release();
-
-	spin_lock_irq(&rtc_lock);
-	rtc_irq_data = 0;
-	spin_unlock_irq(&rtc_lock);
-
-	module_put(rtc_ops->owner);
-	rtc_inuse = 0;
-
-	return 0;
-}
-
-static int rtc_fasync(int fd, struct file *file, int on)
-{
-	return fasync_helper(fd, file, on, &rtc_async_queue);
-}
-
-static const struct file_operations rtc_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.read		= rtc_read,
-	.poll		= rtc_poll,
-	.ioctl		= rtc_ioctl,
-	.open		= rtc_open,
-	.release	= rtc_release,
-	.fasync		= rtc_fasync,
-};
-
-static struct miscdevice rtc_miscdev = {
-	.minor		= RTC_MINOR,
-	.name		= "rtc",
-	.fops		= &rtc_fops,
-};
-
-
-static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data)
-{
-	struct rtc_ops *ops = data;
-	struct rtc_wkalrm alrm;
-	struct rtc_time tm;
-	char *p = page;
-
-	if (rtc_arm_read_time(ops, &tm) == 0) {
-		p += sprintf(p,
-			"rtc_time\t: %02d:%02d:%02d\n"
-			"rtc_date\t: %04d-%02d-%02d\n"
-			"rtc_epoch\t: %04lu\n",
-			tm.tm_hour, tm.tm_min, tm.tm_sec,
-			tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
-			rtc_epoch);
-	}
-
-	if (rtc_arm_read_alarm(ops, &alrm) == 0) {
-		p += sprintf(p, "alrm_time\t: ");
-		if ((unsigned int)alrm.time.tm_hour <= 24)
-			p += sprintf(p, "%02d:", alrm.time.tm_hour);
-		else
-			p += sprintf(p, "**:");
-		if ((unsigned int)alrm.time.tm_min <= 59)
-			p += sprintf(p, "%02d:", alrm.time.tm_min);
-		else
-			p += sprintf(p, "**:");
-		if ((unsigned int)alrm.time.tm_sec <= 59)
-			p += sprintf(p, "%02d\n", alrm.time.tm_sec);
-		else
-			p += sprintf(p, "**\n");
-
-		p += sprintf(p, "alrm_date\t: ");
-		if ((unsigned int)alrm.time.tm_year <= 200)
-			p += sprintf(p, "%04d-", alrm.time.tm_year + 1900);
-		else
-			p += sprintf(p, "****-");
-		if ((unsigned int)alrm.time.tm_mon <= 11)
-			p += sprintf(p, "%02d-", alrm.time.tm_mon + 1);
-		else
-			p += sprintf(p, "**-");
-		if ((unsigned int)alrm.time.tm_mday <= 31)
-			p += sprintf(p, "%02d\n", alrm.time.tm_mday);
-		else
-			p += sprintf(p, "**\n");
-		p += sprintf(p, "alrm_wakeup\t: %s\n",
-			     alrm.enabled ? "yes" : "no");
-		p += sprintf(p, "alrm_pending\t: %s\n",
-			     alrm.pending ? "yes" : "no");
-	}
-
-	if (ops->proc)
-		p += ops->proc(p);
-
-	return p - page;
-}
-
-int register_rtc(struct rtc_ops *ops)
-{
-	int ret = -EBUSY;
-
-	mutex_lock(&rtc_mutex);
-	if (rtc_ops == NULL) {
-		rtc_ops = ops;
-
-		ret = misc_register(&rtc_miscdev);
-		if (ret == 0)
-			create_proc_read_entry("driver/rtc", 0, NULL,
-					       rtc_read_proc, ops);
-	}
-	mutex_unlock(&rtc_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(register_rtc);
-
-void unregister_rtc(struct rtc_ops *rtc)
-{
-	mutex_lock(&rtc_mutex);
-	if (rtc == rtc_ops) {
-		remove_proc_entry("driver/rtc", NULL);
-		misc_deregister(&rtc_miscdev);
-		rtc_ops = NULL;
-	}
-	mutex_unlock(&rtc_mutex);
-}
-EXPORT_SYMBOL(unregister_rtc);

arch/arm/common/sharpsl_pm.c

@@ -31,6 +31,7 @@
 #include <asm/irq.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
@@ -157,6 +158,7 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
 			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
 
+#ifdef CONFIG_BACKLIGHT_CORGI
 	/* If battery is low. limit backlight intensity to save power. */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
 			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
@@ -169,6 +171,7 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 		sharpsl_pm.machinfo->backlight_limit(0);
 		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
 	}
+#endif
 
 	/* Suspend if critical battery level */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)

arch/arm/configs/at91cap9adk_defconfig

@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
@@ -907,7 +906,32 @@ CONFIG_USB_MON=y
 #
 # USB Gadget Support
 #
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
@@ -926,7 +950,59 @@ CONFIG_MMC_AT91=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
 
 #
 # File systems

arch/arm/configs/at91rm9200dk_defconfig

@@ -169,7 +169,6 @@ CONFIG_AT91_CF=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y

arch/arm/configs/at91rm9200ek_defconfig

@@ -160,7 +160,6 @@ CONFIG_ISA_DMA_API=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y

arch/arm/configs/at91sam9260ek_defconfig

@@ -220,7 +220,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/at91sam9261ek_defconfig

@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/at91sam9263ek_defconfig

@@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/at91sam9rlek_defconfig

@@ -211,7 +211,6 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/ateb9200_defconfig

@@ -171,7 +171,6 @@ CONFIG_AT91_CF=m
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-CONFIG_NO_IDLE_HZ=y
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/collie_defconfig

@@ -166,7 +166,6 @@ CONFIG_PCMCIA_SA1100=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y

arch/arm/configs/corgi_defconfig

@@ -165,7 +165,6 @@ CONFIG_PCMCIA_PXA2XX=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y

arch/arm/configs/ecbat91_defconfig

@@ -230,7 +230,6 @@ CONFIG_AT91_CF=y
 #
 # CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/ep93xx_defconfig

@@ -184,7 +184,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/eseries_pxa_defconfig

@@ -251,7 +251,6 @@ CONFIG_PCMCIA_PXA2XX=m
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y

arch/arm/configs/imx27ads_defconfig

+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc6
+# Fri Jun 20 16:29:34 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+
+#
+# MX2 family CPU support
+#
+CONFIG_MACH_MX27=y
+
+#
+# MX2 Platforms
+#
+CONFIG_MACH_MX27ADS=y
+# CONFIG_MACH_PCM038 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_FEC_OLD is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_IMX is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/arm/configs/iop13xx_defconfig

@@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/iop32x_defconfig

@@ -201,7 +201,6 @@ CONFIG_PCI_LEGACY=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/iop33x_defconfig

@@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/ixp2000_defconfig

@@ -184,7 +184,6 @@ CONFIG_PCI=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/ixp23xx_defconfig

@@ -180,7 +180,6 @@ CONFIG_PCI=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/ixp4xx_defconfig

@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y
 CONFIG_MACH_NAS100D=y
 CONFIG_MACH_DSMG600=y
 CONFIG_ARCH_IXDP4XX=y
+CONFIG_MACH_FSG=y
 CONFIG_CPU_IXP46X=y
 CONFIG_CPU_IXP43X=y
 CONFIG_MACH_GTWX5715=y
@@ -770,7 +771,7 @@ CONFIG_ATA=y
 # CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
+CONFIG_SATA_VIA=y
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_ALI is not set
@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
+CONFIG_SENSORS_W83781D=y
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-# CONFIG_LEDS_IXP4XX is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_FSG=y
 
 #
 # LED Triggers
@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_PCF8583 is not set

arch/arm/configs/kafa_defconfig

@@ -162,7 +162,6 @@ CONFIG_CPU_TLB_V4WBI=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/kb9202_defconfig

@@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y

arch/arm/configs/ks8695_defconfig

@@ -174,7 +174,6 @@ CONFIG_PCCARD_NONSTATIC=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/lpd270_defconfig

@@ -173,7 +173,6 @@ CONFIG_XSCALE_PMU=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/lpd7a404_defconfig

@@ -148,7 +148,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_AEABI is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y

arch/arm/configs/netx_defconfig

@@ -154,7 +154,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/onearm_defconfig

@@ -202,7 +202,6 @@ CONFIG_AT91_CF=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/picotux200_defconfig

@@ -201,7 +201,6 @@ CONFIG_ARM_THUMB=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-CONFIG_NO_IDLE_HZ=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y

arch/arm/configs/pnx4008_defconfig

@@ -151,7 +151,6 @@ CONFIG_ARM_THUMB=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/realview-smp_defconfig

@@ -177,7 +177,6 @@ CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
 CONFIG_LOCAL_TIMERS=y
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/realview_defconfig

@@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y

arch/arm/configs/rpc_defconfig

@@ -190,7 +190,6 @@ CONFIG_ISA_DMA_API=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/sam9_l9260_defconfig

@@ -211,7 +211,6 @@ CONFIG_ARM_THUMB=y
 #
 # CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/spitz_defconfig

@@ -164,7 +164,6 @@ CONFIG_PCMCIA_PXA2XX=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y

arch/arm/configs/tct_hammer_defconfig

@@ -247,7 +247,6 @@ CONFIG_ARM_THUMB=y
 #
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=200
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/configs/trizeps4_defconfig

@@ -195,7 +195,6 @@ CONFIG_PCMCIA_PXA2XX=y
 # Kernel Features
 #
 CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y

arch/arm/configs/versatile_defconfig

@@ -151,7 +151,6 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

arch/arm/kernel/atags.c

 #include <linux/slab.h>
-#include <linux/kexec.h>
 #include <linux/proc_fs.h>
 #include <asm/setup.h>
 #include <asm/types.h>
@@ -7,9 +6,8 @@
 
 struct buffer {
 	size_t size;
-	char *data;
+	char data[];
 };
-static struct buffer tags_buffer;
 
 static int
 read_buffer(char* page, char** start, off_t off, int count,
@@ -29,58 +27,57 @@ read_buffer(char* page, char** start, off_t off, int count,
 	return count;
 }
 
-
-static int
-create_proc_entries(void)
-{
-	struct proc_dir_entry* tags_entry;
-
-	tags_entry = create_proc_read_entry("atags", 0400, NULL, read_buffer, &tags_buffer);
-	if (!tags_entry)
-		return -ENOMEM;
-
-	return 0;
-}
-
-
-static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE];
-static char __initdata *atags_copy;
+#define BOOT_PARAMS_SIZE 1536
+static char __initdata atags_copy[BOOT_PARAMS_SIZE];
 
 void __init save_atags(const struct tag *tags)
 {
-	atags_copy = atags_copy_buf;
-	memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE);
+	memcpy(atags_copy, tags, sizeof(atags_copy));
 }
 
-
 static int __init init_atags_procfs(void)
 {
-	struct tag *tag;
-	int error;
+	/*
+	 * This cannot go into save_atags() because kmalloc and proc don't work
+	 * yet when it is called.
+	 */
+	struct proc_dir_entry *tags_entry;
+	struct tag *tag = (struct tag *)atags_copy;
+	struct buffer *b;
+	size_t size;
 
-	if (!atags_copy) {
-		printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n");
-		return -EIO;
+	if (tag->hdr.tag != ATAG_CORE) {
+		printk(KERN_INFO "No ATAGs?");
+		return -EINVAL;
 	}
 
-	for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag))
+	for (; tag->hdr.size; tag = tag_next(tag))
 		;
 
-	tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr);
-	tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL);
-	if (tags_buffer.data == NULL)
-		return -ENOMEM;
-	memcpy(tags_buffer.data, atags_copy, tags_buffer.size);
-
-	error = create_proc_entries();
-	if (error) {
-		printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
-		kfree(tags_buffer.data);
-		tags_buffer.size = 0;
-		tags_buffer.data = NULL;
-	}
+	/* include the terminating ATAG_NONE */
+	size = (char *)tag - atags_copy + sizeof(struct tag_header);
 
-	return error;
-}
+	WARN_ON(tag->hdr.tag != ATAG_NONE);
+
+	b = kmalloc(sizeof(*b) + size, GFP_KERNEL);
+	if (!b)
+		goto nomem;
 
+	b->size = size;
+	memcpy(b->data, atags_copy, size);
+
+	tags_entry = create_proc_read_entry("atags", 0400,
+			NULL, read_buffer, b);
+
+	if (!tags_entry)
+		goto nomem;
+
+	return 0;
+
+nomem:
+	kfree(b);
+	printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
+
+	return -ENOMEM;
+}
 arch_initcall(init_atags_procfs);

arch/arm/kernel/ecard.c

@@ -680,7 +680,7 @@ static int __init ecard_probeirqhw(void)
 #define IO_EC_MEMC8_BASE 0
 #endif
 
-unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
+static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
 {
 	unsigned long address = 0;
 	int slot = ec->slot_no;
@@ -1002,7 +1002,7 @@ ecard_probe(int slot, card_type_t type)
 	}
 
 	rc = -ENODEV;
-	if ((ec->podaddr = ecard_address(ec, type, ECARD_SYNC)) == 0)
+	if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0)
 		goto nodev;
 
 	cid.r_zero = 1;
@@ -1141,10 +1141,10 @@ static int ecard_drv_probe(struct device *dev)
 
 	id = ecard_match_device(drv->id_table, ec);
 
-	ecard_claim(ec);
+	ec->claimed = 1;
 	ret = drv->probe(ec, id);
 	if (ret)
-		ecard_release(ec);
+		ec->claimed = 0;
 	return ret;
 }
 
@@ -1154,7 +1154,7 @@ static int ecard_drv_remove(struct device *dev)
 	struct ecard_driver *drv = ECARD_DRV(dev->driver);
 
 	drv->remove(ec);
-	ecard_release(ec);
+	ec->claimed = 0;
 
 	/*
 	 * Restore the default operations.  We ensure that the
@@ -1182,7 +1182,7 @@ static void ecard_drv_shutdown(struct device *dev)
 	if (dev->driver) {
 		if (drv->shutdown)
 			drv->shutdown(ec);
-		ecard_release(ec);
+		ec->claimed = 0;
 	}
 
 	/*
@@ -1239,7 +1239,6 @@ static int ecard_bus_init(void)
 postcore_initcall(ecard_bus_init);
 
 EXPORT_SYMBOL(ecard_readchunk);
-EXPORT_SYMBOL(__ecard_address);
 EXPORT_SYMBOL(ecard_register_driver);
 EXPORT_SYMBOL(ecard_remove_driver);
 EXPORT_SYMBOL(ecard_bus_type);

arch/arm/kernel/ecard.h

@@ -54,3 +54,16 @@ struct ex_chunk_dir {
 #define c_len(x)	((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
 #define c_start(x)	((x)->r_start)
 };
+
+typedef enum ecard_type {		/* Cards address space		*/
+	ECARD_IOC,
+	ECARD_MEMC,
+	ECARD_EASI
+} card_type_t;
+
+typedef enum {				/* Speed for ECARD_IOC space	*/
+	ECARD_SLOW	 = 0,
+	ECARD_MEDIUM	 = 1,
+	ECARD_FAST	 = 2,
+	ECARD_SYNC	 = 3
+} card_speed_t;

arch/arm/kernel/process.c

@@ -133,10 +133,8 @@ static void default_idle(void)
 		cpu_relax();
 	else {
 		local_irq_disable();
-		if (!need_resched()) {
-			timer_dyn_reprogram();
+		if (!need_resched())
 			arch_idle();
-		}
 		local_irq_enable();
 	}
 }

arch/arm/kernel/stacktrace.c

@@ -36,6 +36,7 @@ EXPORT_SYMBOL(walk_stackframe);
 #ifdef CONFIG_STACKTRACE
 struct stack_trace_data {
 	struct stack_trace *trace;
+	unsigned int no_sched_functions;
 	unsigned int skip;
 };
 
@@ -43,27 +44,52 @@ static int save_trace(struct stackframe *frame, void *d)
 {
 	struct stack_trace_data *data = d;
 	struct stack_trace *trace = data->trace;
+	unsigned long addr = frame->lr;
 
+	if (data->no_sched_functions && in_sched_functions(addr))
+		return 0;
 	if (data->skip) {
 		data->skip--;
 		return 0;
 	}
 
-	trace->entries[trace->nr_entries++] = frame->lr;
+	trace->entries[trace->nr_entries++] = addr;
 
 	return trace->nr_entries >= trace->max_entries;
 }
 
-void save_stack_trace(struct stack_trace *trace)
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	struct stack_trace_data data;
 	unsigned long fp, base;
 
 	data.trace = trace;
 	data.skip = trace->skip;
-	base = (unsigned long)task_stack_page(current);
-	asm("mov %0, fp" : "=r" (fp));
+	base = (unsigned long)task_stack_page(tsk);
+
+	if (tsk != current) {
+#ifdef CONFIG_SMP
+		/*
+		 * What guarantees do we have here that 'tsk'
+		 * is not running on another CPU?
+		 */
+		BUG();
+#else
+		data.no_sched_functions = 1;
+		fp = thread_saved_fp(tsk);
+#endif
+	} else {
+		data.no_sched_functions = 0;
+		asm("mov %0, fp" : "=r" (fp));
+	}
 
 	walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	save_stack_trace_tsk(current, trace);
 }
 #endif

arch/arm/kernel/time.c

@@ -365,108 +365,6 @@ static struct sysdev_class timer_sysclass = {
 	.resume		= timer_resume,
 };
 
-#ifdef CONFIG_NO_IDLE_HZ
-static int timer_dyn_tick_enable(void)
-{
-	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-	unsigned long flags;
-	int ret = -ENODEV;
-
-	if (dyn_tick) {
-		spin_lock_irqsave(&dyn_tick->lock, flags);
-		ret = 0;
-		if (!(dyn_tick->state & DYN_TICK_ENABLED)) {
-			ret = dyn_tick->enable();
-
-			if (ret == 0)
-				dyn_tick->state |= DYN_TICK_ENABLED;
-		}
-		spin_unlock_irqrestore(&dyn_tick->lock, flags);
-	}
-
-	return ret;
-}
-
-static int timer_dyn_tick_disable(void)
-{
-	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-	unsigned long flags;
-	int ret = -ENODEV;
-
-	if (dyn_tick) {
-		spin_lock_irqsave(&dyn_tick->lock, flags);
-		ret = 0;
-		if (dyn_tick->state & DYN_TICK_ENABLED) {
-			ret = dyn_tick->disable();
-
-			if (ret == 0)
-				dyn_tick->state &= ~DYN_TICK_ENABLED;
-		}
-		spin_unlock_irqrestore(&dyn_tick->lock, flags);
-	}
-
-	return ret;
-}
-
-/*
- * Reprogram the system timer for at least the calculated time interval.
- * This function should be called from the idle thread with IRQs disabled,
- * immediately before sleeping.
- */
-void timer_dyn_reprogram(void)
-{
-	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-	unsigned long next, seq, flags;
-
-	if (!dyn_tick)
-		return;
-
-	spin_lock_irqsave(&dyn_tick->lock, flags);
-	if (dyn_tick->state & DYN_TICK_ENABLED) {
-		next = next_timer_interrupt();
-		do {
-			seq = read_seqbegin(&xtime_lock);
-			dyn_tick->reprogram(next - jiffies);
-		} while (read_seqretry(&xtime_lock, seq));
-	}
-	spin_unlock_irqrestore(&dyn_tick->lock, flags);
-}
-
-static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)
-{
-	return sprintf(buf, "%i\n",
-		       (system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1);
-}
-
-static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf,
-				  size_t count)
-{
-	unsigned int enable = simple_strtoul(buf, NULL, 2);
-
-	if (enable)
-		timer_dyn_tick_enable();
-	else
-		timer_dyn_tick_disable();
-
-	return count;
-}
-static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick);
-
-/*
- * dyntick=enable|disable
- */
-static char dyntick_str[4] __initdata = "";
-
-static int __init dyntick_setup(char *str)
-{
-	if (str)
-		strlcpy(dyntick_str, str, sizeof(dyntick_str));
-	return 1;
-}
-
-__setup("dyntick=", dyntick_setup);
-#endif
-
 static int __init timer_init_sysfs(void)
 {
 	int ret = sysdev_class_register(&timer_sysclass);
@@ -475,19 +373,6 @@ static int __init timer_init_sysfs(void)
 		ret = sysdev_register(&system_timer->dev);
 	}
 
-#ifdef CONFIG_NO_IDLE_HZ
-	if (ret == 0 && system_timer->dyn_tick) {
-		ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick);
-
-		/*
-		 * Turn on dynamic tick after calibrate delay
-		 * for correct bogomips
-		 */
-		if (ret == 0 && dyntick_str[0] == 'e')
-			ret = timer_dyn_tick_enable();
-	}
-#endif
-
 	return ret;
 }
 
@@ -500,10 +385,5 @@ void __init time_init(void)
 		system_timer->offset = dummy_gettimeoffset;
 #endif
 	system_timer->init();
-
-#ifdef CONFIG_NO_IDLE_HZ
-	if (system_timer->dyn_tick)
-		spin_lock_init(&system_timer->dyn_tick->lock);
-#endif
 }
 

arch/arm/lib/copy_template.S

@@ -12,14 +12,6 @@
  *  published by the Free Software Foundation.
  */
 
-/*
- * This can be used to enable code to cacheline align the source pointer.
- * Experiments on tested architectures (StrongARM and XScale) didn't show
- * this a worthwhile thing to do.  That might be different in the future.
- */
-//#define CALGN(code...)	code
-#define CALGN(code...)
-
 /*
  * Theory of operation
  * -------------------
@@ -82,7 +74,7 @@
 		stmfd	sp!, {r5 - r8}
 		blt	5f
 
-	CALGN(	ands	ip, r1, #31		)
+	CALGN(	ands	ip, r0, #31		)
 	CALGN(	rsb	r3, ip, #32		)
 	CALGN(	sbcnes	r4, r3, r2		)  @ C is always set here
 	CALGN(	bcs	2f			)
@@ -168,7 +160,7 @@
 		subs	r2, r2, #28
 		blt	14f
 
-	CALGN(	ands	ip, r1, #31		)
+	CALGN(	ands	ip, r0, #31		)
 	CALGN(	rsb	ip, ip, #32		)
 	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
 	CALGN(	subcc	r2, r2, ip		)

arch/arm/lib/memmove.S

@@ -13,14 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-/*
- * This can be used to enable code to cacheline align the source pointer.
- * Experiments on tested architectures (StrongARM and XScale) didn't show
- * this a worthwhile thing to do.  That might be different in the future.
- */
-//#define CALGN(code...)        code
-#define CALGN(code...)
-
 		.text
 
 /*
@@ -55,11 +47,12 @@ ENTRY(memmove)
 		stmfd	sp!, {r5 - r8}
 		blt	5f
 
-	CALGN(	ands	ip, r1, #31		)
+	CALGN(	ands	ip, r0, #31		)
 	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
 	CALGN(	bcs	2f			)
 	CALGN(	adr	r4, 6f			)
 	CALGN(	subs	r2, r2, ip		)  @ C is set here
+	CALGN(	rsb	ip, ip, #32		)
 	CALGN(	add	pc, r4, ip		)
 
 	PLD(	pld	[r1, #-4]		)
@@ -138,8 +131,7 @@ ENTRY(memmove)
 		subs	r2, r2, #28
 		blt	14f
 
-	CALGN(	ands	ip, r1, #31		)
-	CALGN(	rsb	ip, ip, #32		)
+	CALGN(	ands	ip, r0, #31		)
 	CALGN(	sbcnes	r4, ip, r2		)  @ C is always set here
 	CALGN(	subcc	r2, r2, ip		)
 	CALGN(	bcc	15f			)

arch/arm/mach-at91/at91sam9263_devices.c

@@ -391,8 +391,8 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 
 	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 
 	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
 			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));

arch/arm/mach-at91/board-csb637.c

@@ -45,10 +45,10 @@ static void __init csb637_map_io(void)
 	/* Initialize processor: 3.6864 MHz crystal */
 	at91rm9200_initialize(3686400, AT91RM9200_BGA);
 
-	/* DBGU on ttyS0 */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
-	/* make console=ttyS0 the default */
+	/* make console=ttyS0 (ie, DBGU) the default */
 	at91_set_serial_console(0);
 }