提交 84eae18c 编写于 作者: P Peter Ujfalusi 提交者: Liam Girdwood

ASoC: tlv320dac33: Use usleep_range for delays

Switch to use the more precise usleep_range instead of
msleep().
Replace the udelay with usleep_range to remove the busy loop
waiting.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: NMark Borwn <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
上级 872a64d7
......@@ -669,6 +669,7 @@ static int dac33_set_bias_level(struct snd_soc_codec *codec,
static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
{
struct snd_soc_codec *codec = dac33->codec;
unsigned int delay;
switch (dac33->fifo_mode) {
case DAC33_FIFO_MODE1:
......@@ -684,8 +685,9 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
dac33_write16(codec, DAC33_PREFILL_MSB,
DAC33_THRREG(dac33->alarm_threshold));
/* Enable Alarm Threshold IRQ with a delay */
udelay(SAMPLES_TO_US(dac33->burst_rate,
dac33->alarm_threshold));
delay = SAMPLES_TO_US(dac33->burst_rate,
dac33->alarm_threshold) + 1000;
usleep_range(delay, delay + 500);
dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MAT);
break;
case DAC33_FIFO_MODE7:
......@@ -785,11 +787,11 @@ static irqreturn_t dac33_interrupt_handler(int irq, void *dev)
static void dac33_oscwait(struct snd_soc_codec *codec)
{
int timeout = 20;
int timeout = 60;
u8 reg;
do {
msleep(1);
usleep_range(1000, 2000);
dac33_read(codec, DAC33_INT_OSC_STATUS, &reg);
} while (((reg & 0x03) != DAC33_OSCSTATUS_NORMAL) && timeout--);
if ((reg & 0x03) != DAC33_OSCSTATUS_NORMAL)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册