提交 84223598 编写于 作者: C Cornelia Huck

KVM: s390: irq routing for adapter interrupts.

Introduce a new interrupt class for s390 adapter interrupts and enable
irqfds for s390.

This is depending on a new s390 specific vm capability, KVM_CAP_S390_IRQCHIP,
that needs to be enabled by userspace.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
上级 841b91c5
......@@ -586,8 +586,8 @@ struct kvm_fpu {
4.24 KVM_CREATE_IRQCHIP
Capability: KVM_CAP_IRQCHIP
Architectures: x86, ia64, ARM, arm64
Capability: KVM_CAP_IRQCHIP, KVM_CAP_S390_IRQCHIP (s390)
Architectures: x86, ia64, ARM, arm64, s390
Type: vm ioctl
Parameters: none
Returns: 0 on success, -1 on error
......@@ -596,7 +596,10 @@ Creates an interrupt controller model in the kernel. On x86, creates a virtual
ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to have a
local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC; GSI 16-23
only go to the IOAPIC. On ia64, a IOSAPIC is created. On ARM/arm64, a GIC is
created.
created. On s390, a dummy irq routing table is created.
Note that on s390 the KVM_CAP_S390_IRQCHIP vm capability needs to be enabled
before KVM_CREATE_IRQCHIP can be used.
4.25 KVM_IRQ_LINE
......@@ -1336,7 +1339,7 @@ KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
4.52 KVM_SET_GSI_ROUTING
Capability: KVM_CAP_IRQ_ROUTING
Architectures: x86 ia64
Architectures: x86 ia64 s390
Type: vm ioctl
Parameters: struct kvm_irq_routing (in)
Returns: 0 on success, -1 on error
......@@ -1359,6 +1362,7 @@ struct kvm_irq_routing_entry {
union {
struct kvm_irq_routing_irqchip irqchip;
struct kvm_irq_routing_msi msi;
struct kvm_irq_routing_s390_adapter adapter;
__u32 pad[8];
} u;
};
......@@ -1366,6 +1370,7 @@ struct kvm_irq_routing_entry {
/* gsi routing entry types */
#define KVM_IRQ_ROUTING_IRQCHIP 1
#define KVM_IRQ_ROUTING_MSI 2
#define KVM_IRQ_ROUTING_S390_ADAPTER 3
No flags are specified so far, the corresponding field must be set to zero.
......@@ -1381,6 +1386,14 @@ struct kvm_irq_routing_msi {
__u32 pad;
};
struct kvm_irq_routing_s390_adapter {
__u64 ind_addr;
__u64 summary_addr;
__u64 ind_offset;
__u32 summary_offset;
__u32 adapter_id;
};
4.53 KVM_ASSIGN_SET_MSIX_NR
......
......@@ -24,6 +24,14 @@
#define KVM_MAX_VCPUS 64
#define KVM_USER_MEM_SLOTS 32
/*
* These seem to be used for allocating ->chip in the routing table,
* which we don't use. 4096 is an out-of-thin-air value. If we need
* to look at ->chip later on, we'll need to revisit this.
*/
#define KVM_NR_IRQCHIPS 1
#define KVM_IRQCHIP_NUM_PINS 4096
struct sca_entry {
atomic_t scn;
__u32 reserved;
......@@ -274,6 +282,7 @@ struct kvm_arch{
struct kvm_device *flic;
struct gmap *gmap;
int css_support;
int use_irqchip;
struct s390_io_adapter *adapters[MAX_S390_IO_ADAPTERS];
};
......
......@@ -25,6 +25,8 @@ config KVM
select HAVE_KVM_EVENTFD
select KVM_ASYNC_PF
select KVM_ASYNC_PF_SYNC
select HAVE_KVM_IRQCHIP
select HAVE_KVM_IRQ_ROUTING
---help---
Support hosting paravirtualized guest machines using the SIE
virtualization capability on the mainframe. This should work
......
......@@ -7,7 +7,7 @@
# as published by the Free Software Foundation.
KVM := ../../../virt/kvm
common-objs = $(KVM)/kvm_main.o $(KVM)/eventfd.o $(KVM)/async_pf.o
common-objs = $(KVM)/kvm_main.o $(KVM)/eventfd.o $(KVM)/async_pf.o $(KVM)/irqchip.o
ccflags-y := -Ivirt/kvm -Iarch/s390/kvm
......
......@@ -13,6 +13,7 @@
#include <linux/interrupt.h>
#include <linux/kvm_host.h>
#include <linux/hrtimer.h>
#include <linux/mmu_context.h>
#include <linux/signal.h>
#include <linux/slab.h>
#include <asm/asm-offsets.h>
......@@ -1284,3 +1285,123 @@ struct kvm_device_ops kvm_flic_ops = {
.create = flic_create,
.destroy = flic_destroy,
};
static unsigned long get_ind_bit(__u64 addr, unsigned long bit_nr, bool swap)
{
unsigned long bit;
bit = bit_nr + (addr % PAGE_SIZE) * 8;
return swap ? (bit ^ (BITS_PER_LONG - 1)) : bit;
}
static struct s390_map_info *get_map_info(struct s390_io_adapter *adapter,
u64 addr)
{
struct s390_map_info *map;
if (!adapter)
return NULL;
list_for_each_entry(map, &adapter->maps, list) {
if (map->guest_addr == addr)
return map;
}
return NULL;
}
static int adapter_indicators_set(struct kvm *kvm,
struct s390_io_adapter *adapter,
struct kvm_s390_adapter_int *adapter_int)
{
unsigned long bit;
int summary_set, idx;
struct s390_map_info *info;
void *map;
info = get_map_info(adapter, adapter_int->ind_addr);
if (!info)
return -1;
map = page_address(info->page);
bit = get_ind_bit(info->addr, adapter_int->ind_offset, adapter->swap);
set_bit(bit, map);
idx = srcu_read_lock(&kvm->srcu);
mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT);
set_page_dirty_lock(info->page);
info = get_map_info(adapter, adapter_int->summary_addr);
if (!info) {
srcu_read_unlock(&kvm->srcu, idx);
return -1;
}
map = page_address(info->page);
bit = get_ind_bit(info->addr, adapter_int->summary_offset,
adapter->swap);
summary_set = test_and_set_bit(bit, map);
mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT);
set_page_dirty_lock(info->page);
srcu_read_unlock(&kvm->srcu, idx);
return summary_set ? 0 : 1;
}
/*
* < 0 - not injected due to error
* = 0 - coalesced, summary indicator already active
* > 0 - injected interrupt
*/
static int set_adapter_int(struct kvm_kernel_irq_routing_entry *e,
struct kvm *kvm, int irq_source_id, int level,
bool line_status)
{
int ret;
struct s390_io_adapter *adapter;
/* We're only interested in the 0->1 transition. */
if (!level)
return 0;
adapter = get_io_adapter(kvm, e->adapter.adapter_id);
if (!adapter)
return -1;
down_read(&adapter->maps_lock);
ret = adapter_indicators_set(kvm, adapter, &e->adapter);
up_read(&adapter->maps_lock);
if ((ret > 0) && !adapter->masked) {
struct kvm_s390_interrupt s390int = {
.type = KVM_S390_INT_IO(1, 0, 0, 0),
.parm = 0,
.parm64 = (adapter->isc << 27) | 0x80000000,
};
ret = kvm_s390_inject_vm(kvm, &s390int);
if (ret == 0)
ret = 1;
}
return ret;
}
int kvm_set_routing_entry(struct kvm_irq_routing_table *rt,
struct kvm_kernel_irq_routing_entry *e,
const struct kvm_irq_routing_entry *ue)
{
int ret;
switch (ue->type) {
case KVM_IRQ_ROUTING_S390_ADAPTER:
e->set = set_adapter_int;
e->adapter.summary_addr = ue->u.adapter.summary_addr;
e->adapter.ind_addr = ue->u.adapter.ind_addr;
e->adapter.summary_offset = ue->u.adapter.summary_offset;
e->adapter.ind_offset = ue->u.adapter.ind_offset;
e->adapter.adapter_id = ue->u.adapter.adapter_id;
ret = 0;
break;
default:
ret = -EINVAL;
}
return ret;
}
int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, struct kvm *kvm,
int irq_source_id, int level, bool line_status)
{
return -EINVAL;
}
/*
* s390 irqchip routines
*
* Copyright IBM Corp. 2014
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
* as published by the Free Software Foundation.
*
* Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
*/
#ifndef __KVM_IRQ_H
#define __KVM_IRQ_H
#include <linux/kvm_host.h>
static inline int irqchip_in_kernel(struct kvm *kvm)
{
return 1;
}
#endif
......@@ -196,6 +196,10 @@ static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
return -EINVAL;
switch (cap->cap) {
case KVM_CAP_S390_IRQCHIP:
kvm->arch.use_irqchip = 1;
r = 0;
break;
default:
r = -EINVAL;
break;
......@@ -228,6 +232,18 @@ long kvm_arch_vm_ioctl(struct file *filp,
r = kvm_vm_ioctl_enable_cap(kvm, &cap);
break;
}
case KVM_CREATE_IRQCHIP: {
struct kvm_irq_routing_entry routing;
r = -EINVAL;
if (kvm->arch.use_irqchip) {
/* Set up dummy routing. */
memset(&routing, 0, sizeof(routing));
kvm_set_irq_routing(kvm, &routing, 0, 0);
r = 0;
}
break;
}
default:
r = -ENOTTY;
}
......@@ -284,6 +300,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
}
kvm->arch.css_support = 0;
kvm->arch.use_irqchip = 0;
return 0;
out_nogmap:
......
......@@ -297,6 +297,14 @@ static inline unsigned long kvm_dirty_bitmap_bytes(struct kvm_memory_slot *memsl
return ALIGN(memslot->npages, BITS_PER_LONG) / 8;
}
struct kvm_s390_adapter_int {
u64 ind_addr;
u64 summary_addr;
u64 ind_offset;
u32 summary_offset;
u32 adapter_id;
};
struct kvm_kernel_irq_routing_entry {
u32 gsi;
u32 type;
......@@ -309,6 +317,7 @@ struct kvm_kernel_irq_routing_entry {
unsigned pin;
} irqchip;
struct msi_msg msi;
struct kvm_s390_adapter_int adapter;
};
struct hlist_node link;
};
......
......@@ -742,6 +742,7 @@ struct kvm_ppc_smmu_info {
#define KVM_CAP_HYPERV_TIME 96
#define KVM_CAP_IOAPIC_POLARITY_IGNORED 97
#define KVM_CAP_ENABLE_CAP_VM 98
#define KVM_CAP_S390_IRQCHIP 99
#ifdef KVM_CAP_IRQ_ROUTING
......@@ -757,9 +758,18 @@ struct kvm_irq_routing_msi {
__u32 pad;
};
struct kvm_irq_routing_s390_adapter {
__u64 ind_addr;
__u64 summary_addr;
__u64 ind_offset;
__u32 summary_offset;
__u32 adapter_id;
};
/* gsi routing entry types */
#define KVM_IRQ_ROUTING_IRQCHIP 1
#define KVM_IRQ_ROUTING_MSI 2
#define KVM_IRQ_ROUTING_S390_ADAPTER 3
struct kvm_irq_routing_entry {
__u32 gsi;
......@@ -769,6 +779,7 @@ struct kvm_irq_routing_entry {
union {
struct kvm_irq_routing_irqchip irqchip;
struct kvm_irq_routing_msi msi;
struct kvm_irq_routing_s390_adapter adapter;
__u32 pad[8];
} u;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册