提交 8407ef46 编写于 作者: L Linus Torvalds

Merge tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull more RTC updates from Alexandre Belloni:
 "A second pull request for v4.6 with a few fixesi before -rc1.  The new
  features for abx80x actually make the RTC behave correctly.

  Drivers:
   - abx80x: handle both XT and RC oscillators, XT failure bit and
     autocalibration
   - m41t80: avoid out of range year values
   - rv8803: workaround an i2c HW issue"

* tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: abx80x: handle the oscillator failure bit
  rtc: abx80x: handle autocalibration
  rtc: rv8803: workaround i2c HW issue
  rtc: mcp795: add devicetree support
  rtc: asm9260: remove incorrect __init/__exit annotations
  rtc: m41t80: avoid out of range year values
  rtc: s3c: Don't print an error on probe deferral
  rtc: rv3029: stop mentioning rv3029c2
* Maxim MCP795 SPI Serial Real-Time Clock
Required properties:
- compatible: Should contain "maxim,mcp795".
- reg: SPI address for chip
Example:
mcp795: rtc@0 {
compatible = "maxim,mcp795";
reg = <0>;
};
...@@ -589,7 +589,7 @@ config RTC_DRV_RV3029_HWMON ...@@ -589,7 +589,7 @@ config RTC_DRV_RV3029_HWMON
default y default y
help help
Say Y here if you want to expose temperature sensor data on Say Y here if you want to expose temperature sensor data on
rtc-rv3029c2. rtc-rv3029.
config RTC_DRV_RV8803 config RTC_DRV_RV8803
tristate "Micro Crystal RV8803" tristate "Micro Crystal RV8803"
......
...@@ -49,7 +49,20 @@ ...@@ -49,7 +49,20 @@
#define ABX8XX_REG_CD_TIMER_CTL 0x18 #define ABX8XX_REG_CD_TIMER_CTL 0x18
#define ABX8XX_REG_OSC 0x1c
#define ABX8XX_OSC_FOS BIT(3)
#define ABX8XX_OSC_BOS BIT(4)
#define ABX8XX_OSC_ACAL_512 BIT(5)
#define ABX8XX_OSC_ACAL_1024 BIT(6)
#define ABX8XX_OSC_OSEL BIT(7)
#define ABX8XX_REG_OSS 0x1d
#define ABX8XX_OSS_OF BIT(1)
#define ABX8XX_OSS_OMODE BIT(4)
#define ABX8XX_REG_CFG_KEY 0x1f #define ABX8XX_REG_CFG_KEY 0x1f
#define ABX8XX_CFG_KEY_OSC 0xa1
#define ABX8XX_CFG_KEY_MISC 0x9d #define ABX8XX_CFG_KEY_MISC 0x9d
#define ABX8XX_REG_ID0 0x28 #define ABX8XX_REG_ID0 0x28
...@@ -81,6 +94,20 @@ static struct abx80x_cap abx80x_caps[] = { ...@@ -81,6 +94,20 @@ static struct abx80x_cap abx80x_caps[] = {
[ABX80X] = {.pn = 0} [ABX80X] = {.pn = 0}
}; };
static int abx80x_is_rc_mode(struct i2c_client *client)
{
int flags = 0;
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
if (flags < 0) {
dev_err(&client->dev,
"Failed to read autocalibration attribute\n");
return flags;
}
return (flags & ABX8XX_OSS_OMODE) ? 1 : 0;
}
static int abx80x_enable_trickle_charger(struct i2c_client *client, static int abx80x_enable_trickle_charger(struct i2c_client *client,
u8 trickle_cfg) u8 trickle_cfg)
{ {
...@@ -112,7 +139,23 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm) ...@@ -112,7 +139,23 @@ static int abx80x_rtc_read_time(struct device *dev, struct rtc_time *tm)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
unsigned char buf[8]; unsigned char buf[8];
int err; int err, flags, rc_mode = 0;
/* Read the Oscillator Failure only in XT mode */
rc_mode = abx80x_is_rc_mode(client);
if (rc_mode < 0)
return rc_mode;
if (!rc_mode) {
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
if (flags < 0)
return flags;
if (flags & ABX8XX_OSS_OF) {
dev_err(dev, "Oscillator failure, data is invalid.\n");
return -EINVAL;
}
}
err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH, err = i2c_smbus_read_i2c_block_data(client, ABX8XX_REG_HTH,
sizeof(buf), buf); sizeof(buf), buf);
...@@ -140,7 +183,7 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm) ...@@ -140,7 +183,7 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
unsigned char buf[8]; unsigned char buf[8];
int err; int err, flags;
if (tm->tm_year < 100) if (tm->tm_year < 100)
return -EINVAL; return -EINVAL;
...@@ -161,6 +204,18 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm) ...@@ -161,6 +204,18 @@ static int abx80x_rtc_set_time(struct device *dev, struct rtc_time *tm)
return -EIO; return -EIO;
} }
/* Clear the OF bit of Oscillator Status Register */
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
if (flags < 0)
return flags;
err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSS,
flags & ~ABX8XX_OSS_OF);
if (err < 0) {
dev_err(&client->dev, "Unable to write oscillator status register\n");
return err;
}
return 0; return 0;
} }
...@@ -248,6 +303,174 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t) ...@@ -248,6 +303,174 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
return 0; return 0;
} }
static int abx80x_rtc_set_autocalibration(struct device *dev,
int autocalibration)
{
struct i2c_client *client = to_i2c_client(dev);
int retval, flags = 0;
if ((autocalibration != 0) && (autocalibration != 1024) &&
(autocalibration != 512)) {
dev_err(dev, "autocalibration value outside permitted range\n");
return -EINVAL;
}
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
if (flags < 0)
return flags;
if (autocalibration == 0) {
flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024);
} else if (autocalibration == 1024) {
/* 1024 autocalibration is 0x10 */
flags |= ABX8XX_OSC_ACAL_1024;
flags &= ~(ABX8XX_OSC_ACAL_512);
} else {
/* 512 autocalibration is 0x11 */
flags |= (ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512);
}
/* Unlock write access to Oscillator Control Register */
retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
ABX8XX_CFG_KEY_OSC);
if (retval < 0) {
dev_err(dev, "Failed to write CONFIG_KEY register\n");
return retval;
}
retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
return retval;
}
static int abx80x_rtc_get_autocalibration(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
int flags = 0, autocalibration;
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
if (flags < 0)
return flags;
if (flags & ABX8XX_OSC_ACAL_512)
autocalibration = 512;
else if (flags & ABX8XX_OSC_ACAL_1024)
autocalibration = 1024;
else
autocalibration = 0;
return autocalibration;
}
static ssize_t autocalibration_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int retval;
unsigned long autocalibration = 0;
retval = kstrtoul(buf, 10, &autocalibration);
if (retval < 0) {
dev_err(dev, "Failed to store RTC autocalibration attribute\n");
return -EINVAL;
}
retval = abx80x_rtc_set_autocalibration(dev, autocalibration);
return retval ? retval : count;
}
static ssize_t autocalibration_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int autocalibration = 0;
autocalibration = abx80x_rtc_get_autocalibration(dev);
if (autocalibration < 0) {
dev_err(dev, "Failed to read RTC autocalibration\n");
sprintf(buf, "0\n");
return autocalibration;
}
return sprintf(buf, "%d\n", autocalibration);
}
static DEVICE_ATTR_RW(autocalibration);
static ssize_t oscillator_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
int retval, flags, rc_mode = 0;
if (strncmp(buf, "rc", 2) == 0) {
rc_mode = 1;
} else if (strncmp(buf, "xtal", 4) == 0) {
rc_mode = 0;
} else {
dev_err(dev, "Oscillator selection value outside permitted ones\n");
return -EINVAL;
}
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
if (flags < 0)
return flags;
if (rc_mode == 0)
flags &= ~(ABX8XX_OSC_OSEL);
else
flags |= (ABX8XX_OSC_OSEL);
/* Unlock write access on Oscillator Control register */
retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
ABX8XX_CFG_KEY_OSC);
if (retval < 0) {
dev_err(dev, "Failed to write CONFIG_KEY register\n");
return retval;
}
retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
if (retval < 0) {
dev_err(dev, "Failed to write Oscillator Control register\n");
return retval;
}
return retval ? retval : count;
}
static ssize_t oscillator_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int rc_mode = 0;
struct i2c_client *client = to_i2c_client(dev);
rc_mode = abx80x_is_rc_mode(client);
if (rc_mode < 0) {
dev_err(dev, "Failed to read RTC oscillator selection\n");
sprintf(buf, "\n");
return rc_mode;
}
if (rc_mode)
return sprintf(buf, "rc\n");
else
return sprintf(buf, "xtal\n");
}
static DEVICE_ATTR_RW(oscillator);
static struct attribute *rtc_calib_attrs[] = {
&dev_attr_autocalibration.attr,
&dev_attr_oscillator.attr,
NULL,
};
static const struct attribute_group rtc_calib_attr_group = {
.attrs = rtc_calib_attrs,
};
static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled) static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
...@@ -303,6 +526,13 @@ static int abx80x_dt_trickle_cfg(struct device_node *np) ...@@ -303,6 +526,13 @@ static int abx80x_dt_trickle_cfg(struct device_node *np)
return (trickle_cfg | i); return (trickle_cfg | i);
} }
static void rtc_calib_remove_sysfs_group(void *_dev)
{
struct device *dev = _dev;
sysfs_remove_group(&dev->kobj, &rtc_calib_attr_group);
}
static int abx80x_probe(struct i2c_client *client, static int abx80x_probe(struct i2c_client *client,
const struct i2c_device_id *id) const struct i2c_device_id *id)
{ {
...@@ -405,6 +635,24 @@ static int abx80x_probe(struct i2c_client *client, ...@@ -405,6 +635,24 @@ static int abx80x_probe(struct i2c_client *client,
} }
} }
/* Export sysfs entries */
err = sysfs_create_group(&(&client->dev)->kobj, &rtc_calib_attr_group);
if (err) {
dev_err(&client->dev, "Failed to create sysfs group: %d\n",
err);
return err;
}
err = devm_add_action(&client->dev, rtc_calib_remove_sysfs_group,
&client->dev);
if (err) {
rtc_calib_remove_sysfs_group(&client->dev);
dev_err(&client->dev,
"Failed to add sysfs cleanup action: %d\n",
err);
return err;
}
return 0; return 0;
} }
......
...@@ -255,7 +255,7 @@ static const struct rtc_class_ops asm9260_rtc_ops = { ...@@ -255,7 +255,7 @@ static const struct rtc_class_ops asm9260_rtc_ops = {
.alarm_irq_enable = asm9260_alarm_irq_enable, .alarm_irq_enable = asm9260_alarm_irq_enable,
}; };
static int __init asm9260_rtc_probe(struct platform_device *pdev) static int asm9260_rtc_probe(struct platform_device *pdev)
{ {
struct asm9260_rtc_priv *priv; struct asm9260_rtc_priv *priv;
struct device *dev = &pdev->dev; struct device *dev = &pdev->dev;
...@@ -323,7 +323,7 @@ static int __init asm9260_rtc_probe(struct platform_device *pdev) ...@@ -323,7 +323,7 @@ static int __init asm9260_rtc_probe(struct platform_device *pdev)
return ret; return ret;
} }
static int __exit asm9260_rtc_remove(struct platform_device *pdev) static int asm9260_rtc_remove(struct platform_device *pdev)
{ {
struct asm9260_rtc_priv *priv = platform_get_drvdata(pdev); struct asm9260_rtc_priv *priv = platform_get_drvdata(pdev);
......
...@@ -176,7 +176,13 @@ static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm) ...@@ -176,7 +176,13 @@ static int m41t80_set_datetime(struct i2c_client *client, struct rtc_time *tm)
bin2bcd(tm->tm_mday) | (buf[M41T80_REG_DAY] & ~0x3f); bin2bcd(tm->tm_mday) | (buf[M41T80_REG_DAY] & ~0x3f);
buf[M41T80_REG_MON] = buf[M41T80_REG_MON] =
bin2bcd(tm->tm_mon + 1) | (buf[M41T80_REG_MON] & ~0x1f); bin2bcd(tm->tm_mon + 1) | (buf[M41T80_REG_MON] & ~0x1f);
/* assume 20YY not 19YY */ /* assume 20YY not 19YY */
if (tm->tm_year < 100 || tm->tm_year > 199) {
dev_err(&client->dev, "Year must be between 2000 and 2099. It's %d.\n",
tm->tm_year + 1900);
return -EINVAL;
}
buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year % 100); buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year % 100);
if (i2c_transfer(client->adapter, msgs, 1) != 1) { if (i2c_transfer(client->adapter, msgs, 1) != 1) {
......
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/printk.h> #include <linux/printk.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/rtc.h> #include <linux/rtc.h>
#include <linux/of.h>
/* MCP795 Instructions, see datasheet table 3-1 */ /* MCP795 Instructions, see datasheet table 3-1 */
#define MCP795_EEREAD 0x03 #define MCP795_EEREAD 0x03
...@@ -183,9 +184,18 @@ static int mcp795_probe(struct spi_device *spi) ...@@ -183,9 +184,18 @@ static int mcp795_probe(struct spi_device *spi)
return 0; return 0;
} }
#ifdef CONFIG_OF
static const struct of_device_id mcp795_of_match[] = {
{ .compatible = "maxim,mcp795" },
{ }
};
MODULE_DEVICE_TABLE(of, mcp795_of_match);
#endif
static struct spi_driver mcp795_driver = { static struct spi_driver mcp795_driver = {
.driver = { .driver = {
.name = "rtc-mcp795", .name = "rtc-mcp795",
.of_match_table = of_match_ptr(mcp795_of_match),
}, },
.probe = mcp795_probe, .probe = mcp795_probe,
}; };
......
...@@ -61,11 +61,14 @@ static irqreturn_t rv8803_handle_irq(int irq, void *dev_id) ...@@ -61,11 +61,14 @@ static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
struct i2c_client *client = dev_id; struct i2c_client *client = dev_id;
struct rv8803_data *rv8803 = i2c_get_clientdata(client); struct rv8803_data *rv8803 = i2c_get_clientdata(client);
unsigned long events = 0; unsigned long events = 0;
int flags; int flags, try = 0;
mutex_lock(&rv8803->flags_lock); mutex_lock(&rv8803->flags_lock);
flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); do {
flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
try++;
} while ((flags == -ENXIO) && (try < 3));
if (flags <= 0) { if (flags <= 0) {
mutex_unlock(&rv8803->flags_lock); mutex_unlock(&rv8803->flags_lock);
return IRQ_NONE; return IRQ_NONE;
...@@ -424,7 +427,7 @@ static int rv8803_probe(struct i2c_client *client, ...@@ -424,7 +427,7 @@ static int rv8803_probe(struct i2c_client *client,
{ {
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct rv8803_data *rv8803; struct rv8803_data *rv8803;
int err, flags; int err, flags, try = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK)) { I2C_FUNC_SMBUS_I2C_BLOCK)) {
...@@ -441,7 +444,16 @@ static int rv8803_probe(struct i2c_client *client, ...@@ -441,7 +444,16 @@ static int rv8803_probe(struct i2c_client *client,
rv8803->client = client; rv8803->client = client;
i2c_set_clientdata(client, rv8803); i2c_set_clientdata(client, rv8803);
flags = i2c_smbus_read_byte_data(client, RV8803_FLAG); /*
* There is a 60µs window where the RTC may not reply on the i2c bus in
* that case, the transfer is not ACKed. In that case, ensure there are
* multiple attempts.
*/
do {
flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
try++;
} while ((flags == -ENXIO) && (try < 3));
if (flags < 0) if (flags < 0)
return flags; return flags;
...@@ -476,8 +488,12 @@ static int rv8803_probe(struct i2c_client *client, ...@@ -476,8 +488,12 @@ static int rv8803_probe(struct i2c_client *client,
return PTR_ERR(rv8803->rtc); return PTR_ERR(rv8803->rtc);
} }
err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT, try = 0;
RV8803_EXT_WADA); do {
err = i2c_smbus_write_byte_data(rv8803->client, RV8803_EXT,
RV8803_EXT_WADA);
try++;
} while ((err == -ENXIO) && (try < 3));
if (err) if (err)
return err; return err;
......
...@@ -501,18 +501,27 @@ static int s3c_rtc_probe(struct platform_device *pdev) ...@@ -501,18 +501,27 @@ static int s3c_rtc_probe(struct platform_device *pdev)
info->rtc_clk = devm_clk_get(&pdev->dev, "rtc"); info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
if (IS_ERR(info->rtc_clk)) { if (IS_ERR(info->rtc_clk)) {
dev_err(&pdev->dev, "failed to find rtc clock\n"); ret = PTR_ERR(info->rtc_clk);
return PTR_ERR(info->rtc_clk); if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev, "failed to find rtc clock\n");
else
dev_dbg(&pdev->dev, "probe deferred due to missing rtc clk\n");
return ret;
} }
clk_prepare_enable(info->rtc_clk); clk_prepare_enable(info->rtc_clk);
if (info->data->needs_src_clk) { if (info->data->needs_src_clk) {
info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src"); info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
if (IS_ERR(info->rtc_src_clk)) { if (IS_ERR(info->rtc_src_clk)) {
dev_err(&pdev->dev, ret = PTR_ERR(info->rtc_src_clk);
"failed to find rtc source clock\n"); if (ret != -EPROBE_DEFER)
dev_err(&pdev->dev,
"failed to find rtc source clock\n");
else
dev_dbg(&pdev->dev,
"probe deferred due to missing rtc src clk\n");
clk_disable_unprepare(info->rtc_clk); clk_disable_unprepare(info->rtc_clk);
return PTR_ERR(info->rtc_src_clk); return ret;
} }
clk_prepare_enable(info->rtc_src_clk); clk_prepare_enable(info->rtc_src_clk);
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册