提交 8150bc88 编写于 作者: B Ben Dooks 提交者: Mark Brown

S3C24XX: Move and update IIS headers

Move the IIS headers to their correct place.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 c5976504
......@@ -28,7 +28,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
......
......@@ -131,7 +131,4 @@ extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
/* machine specific hardware definitions should go after this */
/* currently here until moved into config (todo) */
#define CONFIG_NO_MULTIWORD_IO
#endif /* __ASM_ARCH_HARDWARE_H */
......@@ -9,7 +9,7 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#include <mach/hardware.h>
#include <mach/map.h>
#define IO_SPACE_LIMIT 0xffffffff
......
......@@ -29,8 +29,8 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <plat/regs-s3c2412-iis.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
......
......@@ -28,7 +28,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
......
......@@ -29,7 +29,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
#define MAP(x) { \
......
......@@ -14,7 +14,7 @@
#define PCIO_BASE 0xe0000000
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
#define __io(a) __typesafe_io(PCIO_BASE + (a))
#define __mem_pci(addr) (addr)
#endif
......@@ -18,6 +18,7 @@
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <plat/clock.h>
#include <plat/cpu.h>
......
......@@ -33,7 +33,7 @@
#include <linux/io.h>
#include <mach/spi-gpio.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <plat/regs-iis.h>
#include "../codecs/wm8753.h"
#include "lm4857.h"
......
......@@ -22,6 +22,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <sound/core.h>
#include <sound/pcm.h>
......@@ -30,10 +31,7 @@
#include <sound/soc.h>
#include <mach/hardware.h>
#include <linux/io.h>
#include <asm/dma.h>
#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
#include <plat/regs-s3c2412-iis.h>
#include <mach/regs-gpio.h>
#include <mach/audio.h>
......
......@@ -34,7 +34,7 @@
#include <asm/dma.h>
#include <mach/dma.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <plat/regs-iis.h>
#include "s3c24xx-pcm.h"
#include "s3c24xx-i2s.h"
......
......@@ -22,7 +22,7 @@
#include <sound/s3c24xx_uda134x.h>
#include <sound/uda134x.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <plat/regs-iis.h>
#include "s3c24xx-pcm.h"
#include "s3c24xx-i2s.h"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册