提交 80f92546 编写于 作者: M Marc Pignat 提交者: Pierre Ossman

mmc: at91_mci: support for block size not modulo 4

Implement transfer with size not modulo 4 for at91sam9*. Please note that the
at91rm9200 simply can't handle this.
Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
上级 8769392b
......@@ -233,11 +233,11 @@ static void at91_mci_pre_dma_read(struct at91mci_host *host)
if (i == 0) {
at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ? sg->length : sg->length / 4);
}
else {
at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
at91_mci_write(host, ATMEL_PDC_RNCR, (data->blksz & 0x3) ? sg->length : sg->length / 4);
}
}
......@@ -430,7 +430,7 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
if (data) {
if ( data->blksz & 0x3 ) {
if ( cpu_is_at91rm9200() && (data->blksz & 0x3) ) {
pr_debug("Unsupported block size\n");
cmd->error = -EINVAL;
mmc_request_done(host->mmc, host->request);
......@@ -482,7 +482,10 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
} else {
/* zero block length and PDC mode */
mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0;
mr |= (block_length << 16);
mr |= AT91_MCI_PDCMODE;
at91_mci_write(host, AT91_MCI_MR, mr);
/*
* Disable the PDC controller
......@@ -517,7 +520,9 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
pr_debug("Transmitting %d bytes\n", host->total_length);
at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ?
host->total_length : host->total_length / 4);
ier = AT91_MCI_CMDRDY;
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册