提交 794e96e8 编写于 作者: L Linus Torvalds

Merge tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "Following up on last week's discussion, here's my part of the EDAC
  pile, highlights in the signed tag.

  The last two patches have a date from just now because I've just
  applied them to the tree after Johannes sent them to me earlier.  I
  decided to forward them now because they're trivial.

  There's a third one for MPC85xx which adds PCIe error interrupt
  support but since it is not so trivial and hasn't seen any linux-next
  time, I'm deferring it to 3.14

  EDAC update highlights:
   - Support for Calxeda ECX-2000 memory controller, from Robert Richter
   - Misc Calxeda Highbank drivers and EDAC core cleanups, from Rob
     Herring and Robert Richter
   - New maintainer for Freescale's MPC85xx EDAC driver: Johannes
     Thumshirn"

* tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  edac/85xx: Remove mpc85xx_pci_err_remove
  EDAC: Add edac-mpc85xx driver to MAINTAINERS
  edac, highbank: Moving error injection to sysfs for edac
  edac, highbank: Add MAINTAINERS entry
  edac: Unify reporting of device info for device, mc and pci
  edac, highbank: Improve and unify naming
  edac, highbank: Add Calxeda ECX-2000 support
  ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
  edac, highbank: Fix interrupt setup of mem and l2 controller
Calxeda DDR memory controller
Properties:
- compatible : Should be "calxeda,hb-ddr-ctrl"
- compatible : Should be:
- "calxeda,hb-ddr-ctrl" for ECX-1000
- "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
- reg : Address and size for DDR controller registers.
- interrupts : Interrupt for DDR controller.
......
......@@ -3063,6 +3063,14 @@ W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/amd64_edac*
EDAC-CALXEDA
M: Doug Thompson <dougthompson@xmission.com>
M: Robert Richter <rric@kernel.org>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/highbank*
EDAC-CAVIUM
M: Ralf Baechle <ralf@linux-mips.org>
M: David Daney <david.daney@cavium.com>
......@@ -3144,6 +3152,13 @@ W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82975x_edac.c
EDAC-MPC85XX
M: Johannes Thumshirn <johannes.thumshirn@men.de>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/mpc85xx_edac.[ch]
EDAC-PASEMI
M: Egor Martovetsky <egor@pasemi.com>
L: linux-edac@vger.kernel.org
......
......@@ -85,6 +85,12 @@
<1 10 0xf08>;
};
memory-controller@fff00000 {
compatible = "calxeda,ecx-2000-ddr-ctrl";
reg = <0xfff00000 0x1000>;
interrupts = <0 91 4>;
};
intc: interrupt-controller@fff11000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
......
......@@ -53,12 +53,6 @@
status = "disabled";
};
memory-controller@fff00000 {
compatible = "calxeda,hb-ddr-ctrl";
reg = <0xfff00000 0x1000>;
interrupts = <0 91 4>;
};
ipc@fff20000 {
compatible = "arm,pl320", "arm,primecell";
reg = <0xfff20000 0x1000>;
......
......@@ -86,6 +86,12 @@
soc {
ranges = <0x00000000 0x00000000 0xffffffff>;
memory-controller@fff00000 {
compatible = "calxeda,hb-ddr-ctrl";
reg = <0xfff00000 0x1000>;
interrupts = <0 91 4>;
};
timer@fff10600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xfff10600 0x20>;
......
......@@ -530,12 +530,9 @@ int edac_device_add_device(struct edac_device_ctl_info *edac_dev)
/* Report action taken */
edac_device_printk(edac_dev, KERN_INFO,
"Giving out device to module '%s' controller "
"'%s': DEV '%s' (%s)\n",
edac_dev->mod_name,
edac_dev->ctl_name,
edac_dev_name(edac_dev),
edac_op_state_to_string(edac_dev->op_state));
"Giving out device to module %s controller %s: DEV %s (%s)\n",
edac_dev->mod_name, edac_dev->ctl_name, edac_dev->dev_name,
edac_op_state_to_string(edac_dev->op_state));
mutex_unlock(&device_ctls_mutex);
return 0;
......
......@@ -788,8 +788,10 @@ int edac_mc_add_mc(struct mem_ctl_info *mci)
}
/* Report action taken */
edac_mc_printk(mci, KERN_INFO, "Giving out device to '%s' '%s':"
" DEV %s\n", mci->mod_name, mci->ctl_name, edac_dev_name(mci));
edac_mc_printk(mci, KERN_INFO,
"Giving out device to module %s controller %s: DEV %s (%s)\n",
mci->mod_name, mci->ctl_name, mci->dev_name,
edac_op_state_to_string(mci->op_state));
edac_mc_owner = mci->mod_name;
......
......@@ -358,11 +358,9 @@ int edac_pci_add_device(struct edac_pci_ctl_info *pci, int edac_idx)
}
edac_pci_printk(pci, KERN_INFO,
"Giving out device to module '%s' controller '%s':"
" DEV '%s' (%s)\n",
pci->mod_name,
pci->ctl_name,
edac_dev_name(pci), edac_op_state_to_string(pci->op_state));
"Giving out device to module %s controller %s: DEV %s (%s)\n",
pci->mod_name, pci->ctl_name, pci->dev_name,
edac_op_state_to_string(pci->op_state));
mutex_unlock(&edac_pci_ctls_mutex);
return 0;
......
......@@ -50,8 +50,15 @@ static irqreturn_t highbank_l2_err_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
static const struct of_device_id hb_l2_err_of_match[] = {
{ .compatible = "calxeda,hb-sregs-l2-ecc", },
{},
};
MODULE_DEVICE_TABLE(of, hb_l2_err_of_match);
static int highbank_l2_err_probe(struct platform_device *pdev)
{
const struct of_device_id *id;
struct edac_device_ctl_info *dci;
struct hb_l2_drvdata *drvdata;
struct resource *r;
......@@ -90,28 +97,32 @@ static int highbank_l2_err_probe(struct platform_device *pdev)
goto err;
}
id = of_match_device(hb_l2_err_of_match, &pdev->dev);
dci->mod_name = pdev->dev.driver->name;
dci->ctl_name = id ? id->compatible : "unknown";
dci->dev_name = dev_name(&pdev->dev);
if (edac_device_add_device(dci))
goto err;
drvdata->db_irq = platform_get_irq(pdev, 0);
res = devm_request_irq(&pdev->dev, drvdata->db_irq,
highbank_l2_err_handler,
0, dev_name(&pdev->dev), dci);
if (res < 0)
goto err;
goto err2;
drvdata->sb_irq = platform_get_irq(pdev, 1);
res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
highbank_l2_err_handler,
0, dev_name(&pdev->dev), dci);
if (res < 0)
goto err;
dci->mod_name = dev_name(&pdev->dev);
dci->dev_name = dev_name(&pdev->dev);
if (edac_device_add_device(dci))
goto err;
goto err2;
devres_close_group(&pdev->dev, NULL);
return 0;
err2:
edac_device_del_device(&pdev->dev);
err:
devres_release_group(&pdev->dev, NULL);
edac_device_free_ctl_info(dci);
......@@ -127,12 +138,6 @@ static int highbank_l2_err_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id hb_l2_err_of_match[] = {
{ .compatible = "calxeda,hb-sregs-l2-ecc", },
{},
};
MODULE_DEVICE_TABLE(of, hb_l2_err_of_match);
static struct platform_driver highbank_l2_edac_driver = {
.probe = highbank_l2_err_probe,
.remove = highbank_l2_err_remove,
......
......@@ -26,31 +26,40 @@
#include "edac_module.h"
/* DDR Ctrlr Error Registers */
#define HB_DDR_ECC_OPT 0x128
#define HB_DDR_ECC_U_ERR_ADDR 0x130
#define HB_DDR_ECC_U_ERR_STAT 0x134
#define HB_DDR_ECC_U_ERR_DATAL 0x138
#define HB_DDR_ECC_U_ERR_DATAH 0x13c
#define HB_DDR_ECC_C_ERR_ADDR 0x140
#define HB_DDR_ECC_C_ERR_STAT 0x144
#define HB_DDR_ECC_C_ERR_DATAL 0x148
#define HB_DDR_ECC_C_ERR_DATAH 0x14c
#define HB_DDR_ECC_INT_STATUS 0x180
#define HB_DDR_ECC_INT_ACK 0x184
#define HB_DDR_ECC_U_ERR_ID 0x424
#define HB_DDR_ECC_C_ERR_ID 0x428
#define HB_DDR_ECC_INT_STAT_CE 0x8
#define HB_DDR_ECC_INT_STAT_DOUBLE_CE 0x10
#define HB_DDR_ECC_INT_STAT_UE 0x20
#define HB_DDR_ECC_INT_STAT_DOUBLE_UE 0x40
#define HB_DDR_ECC_ERR_BASE 0x128
#define MW_DDR_ECC_ERR_BASE 0x1b4
#define HB_DDR_ECC_OPT 0x00
#define HB_DDR_ECC_U_ERR_ADDR 0x08
#define HB_DDR_ECC_U_ERR_STAT 0x0c
#define HB_DDR_ECC_U_ERR_DATAL 0x10
#define HB_DDR_ECC_U_ERR_DATAH 0x14
#define HB_DDR_ECC_C_ERR_ADDR 0x18
#define HB_DDR_ECC_C_ERR_STAT 0x1c
#define HB_DDR_ECC_C_ERR_DATAL 0x20
#define HB_DDR_ECC_C_ERR_DATAH 0x24
#define HB_DDR_ECC_OPT_MODE_MASK 0x3
#define HB_DDR_ECC_OPT_FWC 0x100
#define HB_DDR_ECC_OPT_XOR_SHIFT 16
/* DDR Ctrlr Interrupt Registers */
#define HB_DDR_ECC_INT_BASE 0x180
#define MW_DDR_ECC_INT_BASE 0x218
#define HB_DDR_ECC_INT_STATUS 0x00
#define HB_DDR_ECC_INT_ACK 0x04
#define HB_DDR_ECC_INT_STAT_CE 0x8
#define HB_DDR_ECC_INT_STAT_DOUBLE_CE 0x10
#define HB_DDR_ECC_INT_STAT_UE 0x20
#define HB_DDR_ECC_INT_STAT_DOUBLE_UE 0x40
struct hb_mc_drvdata {
void __iomem *mc_vbase;
void __iomem *mc_err_base;
void __iomem *mc_int_base;
};
static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
......@@ -60,10 +69,10 @@ static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
u32 status, err_addr;
/* Read the interrupt status register */
status = readl(drvdata->mc_vbase + HB_DDR_ECC_INT_STATUS);
status = readl(drvdata->mc_int_base + HB_DDR_ECC_INT_STATUS);
if (status & HB_DDR_ECC_INT_STAT_UE) {
err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_U_ERR_ADDR);
err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_U_ERR_ADDR);
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
err_addr >> PAGE_SHIFT,
err_addr & ~PAGE_MASK, 0,
......@@ -71,9 +80,9 @@ static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
mci->ctl_name, "");
}
if (status & HB_DDR_ECC_INT_STAT_CE) {
u32 syndrome = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_STAT);
u32 syndrome = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_STAT);
syndrome = (syndrome >> 8) & 0xff;
err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_ADDR);
err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_ADDR);
edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
err_addr >> PAGE_SHIFT,
err_addr & ~PAGE_MASK, syndrome,
......@@ -82,66 +91,79 @@ static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
}
/* clear the error, clears the interrupt */
writel(status, drvdata->mc_vbase + HB_DDR_ECC_INT_ACK);
writel(status, drvdata->mc_int_base + HB_DDR_ECC_INT_ACK);
return IRQ_HANDLED;
}
#ifdef CONFIG_EDAC_DEBUG
static ssize_t highbank_mc_err_inject_write(struct file *file,
const char __user *data,
size_t count, loff_t *ppos)
static void highbank_mc_err_inject(struct mem_ctl_info *mci, u8 synd)
{
struct mem_ctl_info *mci = file->private_data;
struct hb_mc_drvdata *pdata = mci->pvt_info;
char buf[32];
size_t buf_size;
u32 reg;
reg = readl(pdata->mc_err_base + HB_DDR_ECC_OPT);
reg &= HB_DDR_ECC_OPT_MODE_MASK;
reg |= (synd << HB_DDR_ECC_OPT_XOR_SHIFT) | HB_DDR_ECC_OPT_FWC;
writel(reg, pdata->mc_err_base + HB_DDR_ECC_OPT);
}
#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
static ssize_t highbank_mc_inject_ctrl(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct mem_ctl_info *mci = to_mci(dev);
u8 synd;
buf_size = min(count, (sizeof(buf)-1));
if (copy_from_user(buf, data, buf_size))
return -EFAULT;
buf[buf_size] = 0;
if (kstrtou8(buf, 16, &synd))
return -EINVAL;
if (!kstrtou8(buf, 16, &synd)) {
reg = readl(pdata->mc_vbase + HB_DDR_ECC_OPT);
reg &= HB_DDR_ECC_OPT_MODE_MASK;
reg |= (synd << HB_DDR_ECC_OPT_XOR_SHIFT) | HB_DDR_ECC_OPT_FWC;
writel(reg, pdata->mc_vbase + HB_DDR_ECC_OPT);
}
highbank_mc_err_inject(mci, synd);
return count;
}
static const struct file_operations highbank_mc_debug_inject_fops = {
.open = simple_open,
.write = highbank_mc_err_inject_write,
.llseek = generic_file_llseek,
static DEVICE_ATTR(inject_ctrl, S_IWUSR, NULL, highbank_mc_inject_ctrl);
struct hb_mc_settings {
int err_offset;
int int_offset;
};
static void highbank_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
{
if (mci->debugfs)
debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci,
&highbank_mc_debug_inject_fops);
;
}
#else
static void highbank_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
{}
#endif
static struct hb_mc_settings hb_settings = {
.err_offset = HB_DDR_ECC_ERR_BASE,
.int_offset = HB_DDR_ECC_INT_BASE,
};
static struct hb_mc_settings mw_settings = {
.err_offset = MW_DDR_ECC_ERR_BASE,
.int_offset = MW_DDR_ECC_INT_BASE,
};
static struct of_device_id hb_ddr_ctrl_of_match[] = {
{ .compatible = "calxeda,hb-ddr-ctrl", .data = &hb_settings },
{ .compatible = "calxeda,ecx-2000-ddr-ctrl", .data = &mw_settings },
{},
};
MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match);
static int highbank_mc_probe(struct platform_device *pdev)
{
const struct of_device_id *id;
const struct hb_mc_settings *settings;
struct edac_mc_layer layers[2];
struct mem_ctl_info *mci;
struct hb_mc_drvdata *drvdata;
struct dimm_info *dimm;
struct resource *r;
void __iomem *base;
u32 control;
int irq;
int res = 0;
id = of_match_device(hb_ddr_ctrl_of_match, &pdev->dev);
if (!id)
return -ENODEV;
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
layers[0].size = 1;
layers[0].is_virt_csrow = true;
......@@ -174,35 +196,31 @@ static int highbank_mc_probe(struct platform_device *pdev)
goto err;
}
drvdata->mc_vbase = devm_ioremap(&pdev->dev,
r->start, resource_size(r));
if (!drvdata->mc_vbase) {
base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (!base) {
dev_err(&pdev->dev, "Unable to map regs\n");
res = -ENOMEM;
goto err;
}
control = readl(drvdata->mc_vbase + HB_DDR_ECC_OPT) & 0x3;
settings = id->data;
drvdata->mc_err_base = base + settings->err_offset;
drvdata->mc_int_base = base + settings->int_offset;
control = readl(drvdata->mc_err_base + HB_DDR_ECC_OPT) & 0x3;
if (!control || (control == 0x2)) {
dev_err(&pdev->dev, "No ECC present, or ECC disabled\n");
res = -ENODEV;
goto err;
}
irq = platform_get_irq(pdev, 0);
res = devm_request_irq(&pdev->dev, irq, highbank_mc_err_handler,
0, dev_name(&pdev->dev), mci);
if (res < 0) {
dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
goto err;
}
mci->mtype_cap = MEM_FLAG_DDR3;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_SECDED;
mci->mod_name = dev_name(&pdev->dev);
mci->mod_name = pdev->dev.driver->name;
mci->mod_ver = "1";
mci->ctl_name = dev_name(&pdev->dev);
mci->ctl_name = id->compatible;
mci->dev_name = dev_name(&pdev->dev);
mci->scrub_mode = SCRUB_SW_SRC;
/* Only a single 4GB DIMM is supported */
......@@ -217,10 +235,20 @@ static int highbank_mc_probe(struct platform_device *pdev)
if (res < 0)
goto err;
highbank_mc_create_debugfs_nodes(mci);
irq = platform_get_irq(pdev, 0);
res = devm_request_irq(&pdev->dev, irq, highbank_mc_err_handler,
0, dev_name(&pdev->dev), mci);
if (res < 0) {
dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
goto err2;
}
device_create_file(&mci->dev, &dev_attr_inject_ctrl);
devres_close_group(&pdev->dev, NULL);
return 0;
err2:
edac_mc_del_mc(&pdev->dev);
err:
devres_release_group(&pdev->dev, NULL);
edac_mc_free(mci);
......@@ -231,17 +259,12 @@ static int highbank_mc_remove(struct platform_device *pdev)
{
struct mem_ctl_info *mci = platform_get_drvdata(pdev);
device_remove_file(&mci->dev, &dev_attr_inject_ctrl);
edac_mc_del_mc(&pdev->dev);
edac_mc_free(mci);
return 0;
}
static const struct of_device_id hb_ddr_ctrl_of_match[] = {
{ .compatible = "calxeda,hb-ddr-ctrl", },
{},
};
MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match);
static struct platform_driver highbank_mc_edac_driver = {
.probe = highbank_mc_probe,
.remove = highbank_mc_remove,
......
......@@ -327,28 +327,6 @@ int mpc85xx_pci_err_probe(struct platform_device *op)
}
EXPORT_SYMBOL(mpc85xx_pci_err_probe);
static int mpc85xx_pci_err_remove(struct platform_device *op)
{
struct edac_pci_ctl_info *pci = dev_get_drvdata(&op->dev);
struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
edac_dbg(0, "\n");
out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR,
orig_pci_err_cap_dr);
out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, orig_pci_err_en);
edac_pci_del_device(pci->dev);
if (edac_op_state == EDAC_OPSTATE_INT)
irq_dispose_mapping(pdata->irq);
edac_pci_free_ctl_info(pci);
return 0;
}
#endif /* CONFIG_PCI */
/**************************** L2 Err device ***************************/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册