提交 73ca66b9 编写于 作者: M Magnus Damm 提交者: Linus Torvalds

[PATCH] release_firmware() fixes

Use release_firmware() to free requested resources.

According to Documentation/firmware_class/README the request_firmware()
call should be followed by a release_firmware().  Some drivers do not
however free the firmware previously allocated with request_firmware().
This patch tries to fix this by making sure that release_firmware() is used
as expected.
Signed-off-by: NMagnus Damm <magnus@valinux.co.jp>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 454d6fbc
......@@ -234,6 +234,7 @@ static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id
data->fw_data = kmalloc(firmware->size, GFP_KERNEL);
if (!data->fw_data) {
BT_ERR("Can't allocate memory for firmware image");
release_firmware(firmware);
usb_free_urb(data->urb);
kfree(data->buffer);
kfree(data);
......
......@@ -896,9 +896,9 @@ static int nxt2002_init(struct dvb_frontend* fe)
}
ret = nxt2002_load_firmware(fe, fw);
release_firmware(fw);
if (ret) {
printk("nxt2002: Writing firmware to device failed\n");
release_firmware(fw);
return ret;
}
printk("nxt2002: Firmware upload complete\n");
......@@ -960,9 +960,9 @@ static int nxt2004_init(struct dvb_frontend* fe)
}
ret = nxt2004_load_firmware(fe, fw);
release_firmware(fw);
if (ret) {
printk("nxt2004: Writing firmware to device failed\n");
release_firmware(fw);
return ret;
}
printk("nxt2004: Firmware upload complete\n");
......
......@@ -437,10 +437,10 @@ static int or51211_init(struct dvb_frontend* fe)
}
ret = or51211_load_firmware(fe, fw);
release_firmware(fw);
if (ret) {
printk(KERN_WARNING "or51211: Writing firmware to "
"device failed!\n");
release_firmware(fw);
return ret;
}
printk(KERN_INFO "or51211: Firmware upload complete.\n");
......
......@@ -318,7 +318,6 @@ static int sp8870_init (struct dvb_frontend* fe)
printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
printk("sp8870: no firmware upload (timeout or file not found?)\n");
release_firmware(fw);
return -EIO;
}
......@@ -327,6 +326,7 @@ static int sp8870_init (struct dvb_frontend* fe)
release_firmware(fw);
return -EIO;
}
release_firmware(fw);
printk("sp8870: firmware upload complete\n");
/* enable TS output and interface pins */
......
......@@ -520,9 +520,9 @@ static int sp887x_init(struct dvb_frontend* fe)
}
ret = sp887x_initial_setup(fe, fw);
release_firmware(fw);
if (ret) {
printk("sp887x: writing firmware to device failed\n");
release_firmware(fw);
return ret;
}
printk("sp887x: firmware upload complete\n");
......
......@@ -453,11 +453,13 @@ static int blackbird_load_firmware(struct cx8802_dev *dev)
if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) {
dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n",
firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE);
release_firmware(firmware);
return -1;
}
if (0 != memcmp(firmware->data, magic, 8)) {
dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n");
release_firmware(firmware);
return -1;
}
......@@ -478,6 +480,7 @@ static int blackbird_load_firmware(struct cx8802_dev *dev)
}
if (checksum) {
dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n");
release_firmware(firmware);
return -1;
}
release_firmware(firmware);
......
......@@ -34,8 +34,6 @@
#include "orinoco.h"
static unsigned char *primsym;
static unsigned char *secsym;
static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
......@@ -440,7 +438,7 @@ spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block)
*/
static int
spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
const unsigned char *image)
const unsigned char *image, int secondary)
{
int ret;
const unsigned char *ptr;
......@@ -455,7 +453,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
first_block = (const struct dblock *) ptr;
/* Read the PDA */
if (image != primsym) {
if (secondary) {
ret = spectrum_read_pda(hw, pda, sizeof(pda));
if (ret)
return ret;
......@@ -472,7 +470,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
return ret;
/* Write the PDA to the adapter */
if (image != primsym) {
if (secondary) {
ret = spectrum_apply_pda(hw, first_block, pda);
if (ret)
return ret;
......@@ -487,7 +485,7 @@ spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
ret = hermes_init(hw);
/* hermes_reset() should return 0 with the secondary firmware */
if (image != primsym && ret != 0)
if (secondary && ret != 0)
return -ENODEV;
/* And this should work with any firmware */
......@@ -509,33 +507,30 @@ spectrum_dl_firmware(hermes_t *hw, struct pcmcia_device *link)
const struct firmware *fw_entry;
if (request_firmware(&fw_entry, primary_fw_name,
&handle_to_dev(link)) == 0) {
primsym = fw_entry->data;
} else {
&handle_to_dev(link)) != 0) {
printk(KERN_ERR PFX "Cannot find firmware: %s\n",
primary_fw_name);
return -ENOENT;
}
if (request_firmware(&fw_entry, secondary_fw_name,
&handle_to_dev(link)) == 0) {
secsym = fw_entry->data;
} else {
printk(KERN_ERR PFX "Cannot find firmware: %s\n",
secondary_fw_name);
return -ENOENT;
}
/* Load primary firmware */
ret = spectrum_dl_image(hw, link, primsym);
ret = spectrum_dl_image(hw, link, fw_entry->data, 0);
release_firmware(fw_entry);
if (ret) {
printk(KERN_ERR PFX "Primary firmware download failed\n");
return ret;
}
/* Load secondary firmware */
ret = spectrum_dl_image(hw, link, secsym);
if (request_firmware(&fw_entry, secondary_fw_name,
&handle_to_dev(link)) != 0) {
printk(KERN_ERR PFX "Cannot find firmware: %s\n",
secondary_fw_name);
return -ENOENT;
}
/* Load secondary firmware */
ret = spectrum_dl_image(hw, link, fw_entry->data, 1);
release_firmware(fw_entry);
if (ret) {
printk(KERN_ERR PFX "Secondary firmware download failed\n");
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册