提交 707d9cf9 编写于 作者: B Ben Widawsky 提交者: Daniel Vetter

drm/i915: gen specific ring init

Gen8 has already had some differentiation with how it handles rings.
Semaphores bring yet more differences, and now is as good a time as any
to do the split.

Also, since gen8 doesn't actually use semaphores up until this point,
put the proper "NULL" values in for the mbox info.

v2: v1 had a stale commit message

v3: Move everything in the is_semaphore_enabled() check

v4: VCS2 rebase
Remove double assignment of signal in render ring (Ville)

v5: Adding missed VCS2 signal init on gen8+ (Rodrigo)
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 ddd4dbc6
......@@ -729,7 +729,11 @@ gen6_add_request(struct intel_engine_cs *ring)
{
int ret;
ret = ring->semaphore.signal(ring, 4);
if (ring->semaphore.signal)
ret = ring->semaphore.signal(ring, 4);
else
ret = intel_ring_begin(ring, 4);
if (ret)
return ret;
......@@ -1952,40 +1956,59 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
ring->id = RCS;
ring->mmio_base = RENDER_RING_BASE;
if (INTEL_INFO(dev)->gen >= 6) {
if (INTEL_INFO(dev)->gen >= 8) {
ring->add_request = gen6_add_request;
ring->flush = gen8_render_ring_flush;
ring->irq_get = gen8_ring_get_irq;
ring->irq_put = gen8_ring_put_irq;
ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
ring->get_seqno = gen6_ring_get_seqno;
ring->set_seqno = ring_set_seqno;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
}
} else if (INTEL_INFO(dev)->gen >= 6) {
ring->add_request = gen6_add_request;
ring->flush = gen7_render_ring_flush;
if (INTEL_INFO(dev)->gen == 6)
ring->flush = gen6_render_ring_flush;
if (INTEL_INFO(dev)->gen >= 8) {
ring->flush = gen8_render_ring_flush;
ring->irq_get = gen8_ring_get_irq;
ring->irq_put = gen8_ring_put_irq;
} else {
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
}
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
ring->get_seqno = gen6_ring_get_seqno;
ring->set_seqno = ring_set_seqno;
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
/*
* The current semaphore is only applied on pre-gen8 platform.
* And there is no VCS2 ring on the pre-gen8 platform. So the
* semaphore between RCS and VCS2 is initialized as INVALID.
* Gen8 will initialize the sema between VCS2 and RCS later.
*/
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_RV;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_RB;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_RVE;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_VRSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_BRSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_VERSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
/*
* The current semaphore is only applied on pre-gen8
* platform. And there is no VCS2 ring on the pre-gen8
* platform. So the semaphore between RCS and VCS2 is
* initialized as INVALID. Gen8 will initialize the
* sema between VCS2 and RCS later.
*/
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_RV;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_RB;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_RVE;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_VRSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_BRSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_VERSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
}
} else if (IS_GEN5(dev)) {
ring->add_request = pc_render_add_request;
ring->flush = gen4_render_ring_flush;
......@@ -2013,6 +2036,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
ring->irq_enable_mask = I915_USER_INTERRUPT;
}
ring->write_tail = ring_write_tail;
if (IS_HASWELL(dev))
ring->dispatch_execbuffer = hsw_ring_dispatch_execbuffer;
else if (IS_GEN8(dev))
......@@ -2163,31 +2187,49 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
ring->irq_put = gen8_ring_put_irq;
ring->dispatch_execbuffer =
gen8_ring_dispatch_execbuffer;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
/*
* The current semaphore is only applied on
* pre-gen8 platform. And there is no VCS2 ring
* on the pre-gen8 platform. So the semaphore
* between VCS and VCS2 is initialized as
* INVALID. Gen8 will initialize the sema
* between VCS2 and VCS later.
*/
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
}
} else {
ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
ring->dispatch_execbuffer =
gen6_ring_dispatch_execbuffer;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VR;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VB;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_VVE;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_RVSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_BVSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_VEVSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
}
}
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
/*
* The current semaphore is only applied on pre-gen8 platform.
* And there is no VCS2 ring on the pre-gen8 platform. So the
* semaphore between VCS and VCS2 is initialized as INVALID.
* Gen8 will initialize the sema between VCS2 and VCS later.
*/
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VR;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VB;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_VVE;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_RVSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_BVSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_VEVSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
} else {
ring->mmio_base = BSD_RING_BASE;
ring->flush = bsd_ring_flush;
......@@ -2283,30 +2325,47 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
ring->irq_get = gen8_ring_get_irq;
ring->irq_put = gen8_ring_put_irq;
ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
}
} else {
ring->irq_enable_mask = GT_BLT_USER_INTERRUPT;
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.signal = gen6_signal;
ring->semaphore.sync_to = gen6_ring_sync;
/*
* The current semaphore is only applied on pre-gen8
* platform. And there is no VCS2 ring on the pre-gen8
* platform. So the semaphore between BCS and VCS2 is
* initialized as INVALID. Gen8 will initialize the
* sema between BCS and VCS2 later.
*/
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_BR;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_BV;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_BVE;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_RBSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_VBSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_VEBSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
}
}
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
/*
* The current semaphore is only applied on pre-gen8 platform. And
* there is no VCS2 ring on the pre-gen8 platform. So the semaphore
* between BCS and VCS2 is initialized as INVALID.
* Gen8 will initialize the sema between BCS and VCS2 later.
*/
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_BR;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_BV;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_BVE;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_RBSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_VBSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_VEBSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
ring->init = init_ring_common;
return intel_init_ring_buffer(dev, ring);
......@@ -2333,24 +2392,40 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
ring->irq_get = gen8_ring_get_irq;
ring->irq_put = gen8_ring_put_irq;
ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
}
} else {
ring->irq_enable_mask = PM_VEBOX_USER_INTERRUPT;
ring->irq_get = hsw_vebox_get_irq;
ring->irq_put = hsw_vebox_put_irq;
ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
if (i915_semaphore_is_enabled(dev)) {
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VER;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_VEV;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VEB;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_RVESYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_VVESYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_BVESYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
}
}
ring->semaphore.sync_to = gen6_ring_sync;
ring->semaphore.signal = gen6_signal;
ring->semaphore.mbox.wait[RCS] = MI_SEMAPHORE_SYNC_VER;
ring->semaphore.mbox.wait[VCS] = MI_SEMAPHORE_SYNC_VEV;
ring->semaphore.mbox.wait[BCS] = MI_SEMAPHORE_SYNC_VEB;
ring->semaphore.mbox.wait[VECS] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.wait[VCS2] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore.mbox.signal[RCS] = GEN6_RVESYNC;
ring->semaphore.mbox.signal[VCS] = GEN6_VVESYNC;
ring->semaphore.mbox.signal[BCS] = GEN6_BVESYNC;
ring->semaphore.mbox.signal[VECS] = GEN6_NOSYNC;
ring->semaphore.mbox.signal[VCS2] = GEN6_NOSYNC;
ring->init = init_ring_common;
return intel_init_ring_buffer(dev, ring);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册