ARM: OMAP1: OCPI: move to mach-omap1/

Move the OMAP1 OCPI "bus" code to arch/arm/mach-omap1, since it is
only used on OMAP1 devices.  In the long term, it probably makes sense
to move the OCPI bus code to somewhere under drivers/.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/Makefile

@@ -12,6 +12,9 @@ endif
 
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
+# OCPI interconnect support for 1710, 1610 and 5912
+obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
+
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 

arch/arm/mach-omap1/common.h

@@ -63,4 +63,6 @@ extern bool omap_32k_timer_init(void);
 
 extern u32 omap_irq_flags;
 
+extern int ocpi_enable(void);
+
 #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */

arch/arm/plat-omap/ocpi.c → arch/arm/mach-omap1/ocpi.c

@@ -4,6 +4,7 @@
  * Minimal OCP bus support for omap16xx
  *
  * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Written by Tony Lindgren <tony@atomide.com>
  *
  * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>.
@@ -35,6 +36,8 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)
 #define OCPI_CMD_FAULT		(OCPI_BASE + 0x04)
@@ -64,7 +67,7 @@ int ocpi_enable(void)
 	/* Enable access for OHCI in OCPI */
 	val = omap_readl(OCPI_PROT);
 	val &= ~0xff;
-	//val &= (1 << 0);	/* Allow access only to EMIFS */
+	/* val &= (1 << 0);	 Allow access only to EMIFS */
 	omap_writel(val, OCPI_PROT);
 
 	val = omap_readl(OCPI_SEC);
@@ -86,7 +89,7 @@ static int __init omap_ocpi_init(void)
 
 	clk_enable(ocpi_ck);
 	ocpi_enable();
-	printk("OMAP OCPI interconnect driver loaded\n");
+	pr_info("OMAP OCPI interconnect driver loaded\n");
 
 	return 0;
 }

arch/arm/plat-omap/Makefile

@@ -9,9 +9,6 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-# OCPI interconnect support for 1710, 1610 and 5912
-obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
-
 # omap_device support (OMAP2+ only at the moment)
 obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP3) += omap_device.o