提交 6ee16520 编写于 作者: Y Yi Zou 提交者: David S. Miller

ixgbe: Add support for dcbnl_rtnl_ops.setapp/getapp

Add support for dcbnl_rtnl_ops.setapp/getapp to set or get the current user
priority bitmap for the given application protocol. Currently, 82599 only
supports setapp/getapp for Fiber Channel over Ethernet (FCoE) protocol.
Signed-off-by: NYi Zou <yi.zou@intel.com>
Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 57949686
......@@ -452,6 +452,10 @@ extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid);
extern int ixgbe_fcoe_enable(struct net_device *netdev);
extern int ixgbe_fcoe_disable(struct net_device *netdev);
#ifdef CONFIG_IXGBE_DCB
extern u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter);
extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up);
#endif /* CONFIG_IXGBE_DCB */
#endif /* IXGBE_FCOE */
#endif /* _IXGBE_H_ */
......@@ -480,6 +480,64 @@ static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state)
return;
}
/**
* ixgbe_dcbnl_getapp - retrieve the DCBX application user priority
* @netdev : the corresponding netdev
* @idtype : identifies the id as ether type or TCP/UDP port number
* @id: id is either ether type or TCP/UDP port number
*
* Returns : on success, returns a non-zero 802.1p user priority bitmap
* otherwise returns 0 as the invalid user priority bitmap to indicate an
* error.
*/
static u8 ixgbe_dcbnl_getapp(struct net_device *netdev, u8 idtype, u16 id)
{
u8 rval = 0;
switch (idtype) {
case DCB_APP_IDTYPE_ETHTYPE:
#ifdef IXGBE_FCOE
if (id == ETH_P_FCOE)
rval = ixgbe_fcoe_getapp(netdev_priv(netdev));
#endif
break;
case DCB_APP_IDTYPE_PORTNUM:
break;
default:
break;
}
return rval;
}
/**
* ixgbe_dcbnl_setapp - set the DCBX application user priority
* @netdev : the corresponding netdev
* @idtype : identifies the id as ether type or TCP/UDP port number
* @id: id is either ether type or TCP/UDP port number
* @up: the 802.1p user priority bitmap
*
* Returns : 0 on success or 1 on error
*/
static u8 ixgbe_dcbnl_setapp(struct net_device *netdev,
u8 idtype, u16 id, u8 up)
{
u8 rval = 1;
switch (idtype) {
case DCB_APP_IDTYPE_ETHTYPE:
#ifdef IXGBE_FCOE
if (id == ETH_P_FCOE)
rval = ixgbe_fcoe_setapp(netdev_priv(netdev), up);
#endif
break;
case DCB_APP_IDTYPE_PORTNUM:
break;
default:
break;
}
return rval;
}
struct dcbnl_rtnl_ops dcbnl_ops = {
.getstate = ixgbe_dcbnl_get_state,
.setstate = ixgbe_dcbnl_set_state,
......@@ -500,5 +558,7 @@ struct dcbnl_rtnl_ops dcbnl_ops = {
.setnumtcs = ixgbe_dcbnl_setnumtcs,
.getpfcstate = ixgbe_dcbnl_getpfcstate,
.setpfcstate = ixgbe_dcbnl_setpfcstate,
.getapp = ixgbe_dcbnl_getapp,
.setapp = ixgbe_dcbnl_setapp,
};
......@@ -27,6 +27,9 @@
#include "ixgbe.h"
#ifdef CONFIG_IXGBE_DCB
#include "ixgbe_dcb_82599.h"
#endif /* CONFIG_IXGBE_DCB */
#include <linux/if_ether.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
......@@ -648,3 +651,64 @@ int ixgbe_fcoe_disable(struct net_device *netdev)
out_disable:
return rc;
}
#ifdef CONFIG_IXGBE_DCB
/**
* ixgbe_fcoe_getapp - retrieves current user priority bitmap for FCoE
* @adapter : ixgbe adapter
*
* Finds out the corresponding user priority bitmap from the current
* traffic class that FCoE belongs to. Returns 0 as the invalid user
* priority bitmap to indicate an error.
*
* Returns : 802.1p user priority bitmap for FCoE
*/
u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter)
{
int i;
u8 tc;
u32 up2tc;
up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC);
for (i = 0; i < MAX_USER_PRIORITY; i++) {
tc = (u8)(up2tc >> (i * IXGBE_RTTUP2TC_UP_SHIFT));
tc &= (MAX_TRAFFIC_CLASS - 1);
if (adapter->fcoe.tc == tc)
return 1 << i;
}
return 0;
}
/**
* ixgbe_fcoe_setapp - sets the user priority bitmap for FCoE
* @adapter : ixgbe adapter
* @up : 802.1p user priority bitmap
*
* Finds out the traffic class from the input user priority
* bitmap for FCoE.
*
* Returns : 0 on success otherwise returns 1 on error
*/
u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up)
{
int i;
u32 up2tc;
/* valid user priority bitmap must not be 0 */
if (up) {
/* from user priority to the corresponding traffic class */
up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC);
for (i = 0; i < MAX_USER_PRIORITY; i++) {
if (up & (1 << i)) {
up2tc >>= (i * IXGBE_RTTUP2TC_UP_SHIFT);
up2tc &= (MAX_TRAFFIC_CLASS - 1);
adapter->fcoe.tc = (u8)up2tc;
return 0;
}
}
}
return 1;
}
#endif /* CONFIG_IXGBE_DCB */
......@@ -46,6 +46,9 @@
#define IXGBE_FCBUFF_MIN 4096 /* 4KB min */
#define IXGBE_FCOE_DDP_MAX 512 /* 9 bits xid */
/* Default traffic class to use for FCoE */
#define IXGBE_FCOE_DEFTC 3
/* fcerr */
#define IXGBE_FCERR_BADCRC 0x00100000
......@@ -59,6 +62,7 @@ struct ixgbe_fcoe_ddp {
};
struct ixgbe_fcoe {
u8 tc;
spinlock_t lock;
struct pci_pool *pool;
struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
......
......@@ -3801,6 +3801,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
adapter->ring_feature[RING_F_FCOE].indices = 0;
/* Default traffic class to use for FCoE */
adapter->fcoe.tc = IXGBE_FCOE_DEFTC;
#endif /* IXGBE_FCOE */
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册