提交 6e81176d 编写于 作者: J Jouni Hogander 提交者: Tony Lindgren

ARM: OMAP2 Provide function to enable/disable uart clocks

This patch adds common function to enable/disable omap2/3 uart
clocks. Enabled uarts are passed by bootloader in atags and clocks for
these enabled uarts are touched.
Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 56f68556
......@@ -3,7 +3,7 @@
*
* OMAP2 serial support.
*
* Copyright (C) 2005 Nokia Corporation
* Copyright (C) 2005-2008 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
* Based off of arch/arm/mach-omap/omap1/serial.c
......@@ -23,12 +23,8 @@
#include <mach/common.h>
#include <mach/board.h>
static struct clk * uart1_ick = NULL;
static struct clk * uart1_fck = NULL;
static struct clk * uart2_ick = NULL;
static struct clk * uart2_fck = NULL;
static struct clk * uart3_ick = NULL;
static struct clk * uart3_fck = NULL;
static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
static struct plat_serial8250_port serial_platform_data[] = {
{
......@@ -38,7 +34,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP16XX_BASE_BAUD * 16,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.membase = IO_ADDRESS(OMAP_UART2_BASE),
.mapbase = OMAP_UART2_BASE,
......@@ -46,7 +42,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP16XX_BASE_BAUD * 16,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.membase = IO_ADDRESS(OMAP_UART3_BASE),
.mapbase = OMAP_UART3_BASE,
......@@ -54,7 +50,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP16XX_BASE_BAUD * 16,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
......@@ -87,10 +83,27 @@ static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
}
void __init omap_serial_init()
void omap_serial_enable_clocks(int enable)
{
int i;
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
if (uart_ick[i] && uart_fck[i]) {
if (enable) {
clk_enable(uart_ick[i]);
clk_enable(uart_fck[i]);
} else {
clk_disable(uart_ick[i]);
clk_disable(uart_fck[i]);
}
}
}
}
void __init omap_serial_init(void)
{
int i;
const struct omap_uart_config *info;
char name[16];
/*
* Make sure the serial ports are muxed on at this point.
......@@ -98,8 +111,7 @@ void __init omap_serial_init()
* if not needed.
*/
info = omap_get_config(OMAP_TAG_UART,
struct omap_uart_config);
info = omap_get_config(OMAP_TAG_UART, struct omap_uart_config);
if (info == NULL)
return;
......@@ -113,53 +125,21 @@ void __init omap_serial_init()
continue;
}
switch (i) {
case 0:
uart1_ick = clk_get(NULL, "uart1_ick");
if (IS_ERR(uart1_ick))
printk("Could not get uart1_ick\n");
else {
clk_enable(uart1_ick);
}
uart1_fck = clk_get(NULL, "uart1_fck");
if (IS_ERR(uart1_fck))
printk("Could not get uart1_fck\n");
else {
clk_enable(uart1_fck);
}
break;
case 1:
uart2_ick = clk_get(NULL, "uart2_ick");
if (IS_ERR(uart2_ick))
printk("Could not get uart2_ick\n");
else {
clk_enable(uart2_ick);
}
uart2_fck = clk_get(NULL, "uart2_fck");
if (IS_ERR(uart2_fck))
printk("Could not get uart2_fck\n");
else {
clk_enable(uart2_fck);
}
break;
case 2:
uart3_ick = clk_get(NULL, "uart3_ick");
if (IS_ERR(uart3_ick))
printk("Could not get uart3_ick\n");
else {
clk_enable(uart3_ick);
}
uart3_fck = clk_get(NULL, "uart3_fck");
if (IS_ERR(uart3_fck))
printk("Could not get uart3_fck\n");
else {
clk_enable(uart3_fck);
}
break;
}
sprintf(name, "uart%d_ick", i+1);
uart_ick[i] = clk_get(NULL, name);
if (IS_ERR(uart_ick[i])) {
printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
uart_ick[i] = NULL;
} else
clk_enable(uart_ick[i]);
sprintf(name, "uart%d_fck", i+1);
uart_fck[i] = clk_get(NULL, name);
if (IS_ERR(uart_fck[i])) {
printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
uart_fck[i] = NULL;
} else
clk_enable(uart_fck[i]);
omap_serial_reset(p);
}
......
......@@ -34,6 +34,7 @@ struct sys_timer;
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
extern void omap_serial_init(void);
extern void omap_serial_enable_clocks(int enable);
#ifdef CONFIG_I2C_OMAP
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
......
......@@ -20,11 +20,17 @@
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x4806e000
#elif defined(CONFIG_ARCH_OMAP3)
/* OMAP3 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x49020000
#endif
#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
#define is_omap_port(pt) ({int __ret = 0; \
if ((pt)->port.mapbase == OMAP_UART1_BASE || \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册