提交 6cddcc7a 编写于 作者: B Ben Greear 提交者: Kalle Valo

ath10k: support ethtool stats

Add support for reading firmware stats through the ethtool
API.  This may be easier for applications to manipulate
compared to parsing a text based debugfs file.

kvalo: remove unneeded ifdefs, call ath10k_debug_fw_stats_request() and added
simple error handling
Signed-off-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
上级 f51dbe73
......@@ -1130,6 +1130,166 @@ static ssize_t ath10k_write_fw_dbglog(struct file *file,
return ret;
}
/* TODO: Would be nice to always support ethtool stats, would need to
* move the stats storage out of ath10k_debug, or always have ath10k_debug
* struct available..
*/
/* This generally cooresponds to the debugfs fw_stats file */
static const char ath10k_gstrings_stats[][ETH_GSTRING_LEN] = {
"tx_pkts_nic",
"tx_bytes_nic",
"rx_pkts_nic",
"rx_bytes_nic",
"d_noise_floor",
"d_cycle_count",
"d_phy_error",
"d_rts_bad",
"d_rts_good",
"d_tx_power", /* in .5 dbM I think */
"d_rx_crc_err", /* fcs_bad */
"d_no_beacon",
"d_tx_mpdus_queued",
"d_tx_msdu_queued",
"d_tx_msdu_dropped",
"d_local_enqued",
"d_local_freed",
"d_tx_ppdu_hw_queued",
"d_tx_ppdu_reaped",
"d_tx_fifo_underrun",
"d_tx_ppdu_abort",
"d_tx_mpdu_requed",
"d_tx_excessive_retries",
"d_tx_hw_rate",
"d_tx_dropped_sw_retries",
"d_tx_illegal_rate",
"d_tx_continuous_xretries",
"d_tx_timeout",
"d_tx_mpdu_txop_limit",
"d_pdev_resets",
"d_rx_mid_ppdu_route_change",
"d_rx_status",
"d_rx_extra_frags_ring0",
"d_rx_extra_frags_ring1",
"d_rx_extra_frags_ring2",
"d_rx_extra_frags_ring3",
"d_rx_msdu_htt",
"d_rx_mpdu_htt",
"d_rx_msdu_stack",
"d_rx_mpdu_stack",
"d_rx_phy_err",
"d_rx_phy_err_drops",
"d_rx_mpdu_errors", /* FCS, MIC, ENC */
"d_fw_crash_count",
"d_fw_warm_reset_count",
"d_fw_cold_reset_count",
};
#define ATH10K_SSTATS_LEN ARRAY_SIZE(ath10k_gstrings_stats)
void ath10k_debug_get_et_strings(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u32 sset, u8 *data)
{
if (sset == ETH_SS_STATS)
memcpy(data, *ath10k_gstrings_stats,
sizeof(ath10k_gstrings_stats));
}
int ath10k_debug_get_et_sset_count(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, int sset)
{
if (sset == ETH_SS_STATS)
return ATH10K_SSTATS_LEN;
return 0;
}
void ath10k_debug_get_et_stats(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ethtool_stats *stats, u64 *data)
{
struct ath10k *ar = hw->priv;
static const struct ath10k_fw_stats_pdev zero_stats = {};
const struct ath10k_fw_stats_pdev *pdev_stats;
int i = 0, ret;
mutex_lock(&ar->conf_mutex);
if (ar->state == ATH10K_STATE_ON) {
ret = ath10k_debug_fw_stats_request(ar);
if (ret) {
/* just print a warning and try to use older results */
ath10k_warn(ar,
"failed to get fw stats for ethtool: %d\n",
ret);
}
}
pdev_stats = list_first_entry_or_null(&ar->debug.fw_stats.pdevs,
struct ath10k_fw_stats_pdev,
list);
if (!pdev_stats) {
/* no results available so just return zeroes */
pdev_stats = &zero_stats;
}
spin_lock_bh(&ar->data_lock);
data[i++] = pdev_stats->hw_reaped; /* ppdu reaped */
data[i++] = 0; /* tx bytes */
data[i++] = pdev_stats->htt_mpdus;
data[i++] = 0; /* rx bytes */
data[i++] = pdev_stats->ch_noise_floor;
data[i++] = pdev_stats->cycle_count;
data[i++] = pdev_stats->phy_err_count;
data[i++] = pdev_stats->rts_bad;
data[i++] = pdev_stats->rts_good;
data[i++] = pdev_stats->chan_tx_power;
data[i++] = pdev_stats->fcs_bad;
data[i++] = pdev_stats->no_beacons;
data[i++] = pdev_stats->mpdu_enqued;
data[i++] = pdev_stats->msdu_enqued;
data[i++] = pdev_stats->wmm_drop;
data[i++] = pdev_stats->local_enqued;
data[i++] = pdev_stats->local_freed;
data[i++] = pdev_stats->hw_queued;
data[i++] = pdev_stats->hw_reaped;
data[i++] = pdev_stats->underrun;
data[i++] = pdev_stats->tx_abort;
data[i++] = pdev_stats->mpdus_requed;
data[i++] = pdev_stats->tx_ko;
data[i++] = pdev_stats->data_rc;
data[i++] = pdev_stats->sw_retry_failure;
data[i++] = pdev_stats->illgl_rate_phy_err;
data[i++] = pdev_stats->pdev_cont_xretry;
data[i++] = pdev_stats->pdev_tx_timeout;
data[i++] = pdev_stats->txop_ovf;
data[i++] = pdev_stats->pdev_resets;
data[i++] = pdev_stats->mid_ppdu_route_change;
data[i++] = pdev_stats->status_rcvd;
data[i++] = pdev_stats->r0_frags;
data[i++] = pdev_stats->r1_frags;
data[i++] = pdev_stats->r2_frags;
data[i++] = pdev_stats->r3_frags;
data[i++] = pdev_stats->htt_msdus;
data[i++] = pdev_stats->htt_mpdus;
data[i++] = pdev_stats->loc_msdus;
data[i++] = pdev_stats->loc_mpdus;
data[i++] = pdev_stats->phy_errs;
data[i++] = pdev_stats->phy_err_drop;
data[i++] = pdev_stats->mpdu_errs;
data[i++] = ar->stats.fw_crash_counter;
data[i++] = ar->stats.fw_warm_reset_counter;
data[i++] = ar->stats.fw_cold_reset_counter;
spin_unlock_bh(&ar->data_lock);
mutex_unlock(&ar->conf_mutex);
WARN_ON(i != ATH10K_SSTATS_LEN);
}
static const struct file_operations fops_fw_dbglog = {
.read = ath10k_read_fw_dbglog,
.write = ath10k_write_fw_dbglog,
......
......@@ -63,6 +63,15 @@ void ath10k_debug_dbglog_add(struct ath10k *ar, u8 *buffer, int len);
#define ATH10K_DFS_STAT_INC(ar, c) (ar->debug.dfs_stats.c++)
void ath10k_debug_get_et_strings(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u32 sset, u8 *data);
int ath10k_debug_get_et_sset_count(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, int sset);
void ath10k_debug_get_et_stats(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ethtool_stats *stats, u64 *data);
#else
static inline int ath10k_debug_start(struct ath10k *ar)
{
......@@ -115,6 +124,10 @@ ath10k_debug_get_new_fw_crash_data(struct ath10k *ar)
#define ATH10K_DFS_STAT_INC(ar, c) do { } while (0)
#define ath10k_debug_get_et_strings NULL
#define ath10k_debug_get_et_sset_count NULL
#define ath10k_debug_get_et_stats NULL
#endif /* CONFIG_ATH10K_DEBUGFS */
#ifdef CONFIG_ATH10K_DEBUG
......
......@@ -4505,6 +4505,9 @@ static const struct ieee80211_ops ath10k_ops = {
.sta_rc_update = ath10k_sta_rc_update,
.get_tsf = ath10k_get_tsf,
.ampdu_action = ath10k_ampdu_action,
.get_et_sset_count = ath10k_debug_get_et_sset_count,
.get_et_stats = ath10k_debug_get_et_stats,
.get_et_strings = ath10k_debug_get_et_strings,
CFG80211_TESTMODE_CMD(ath10k_tm_cmd)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册