ath10k: poll HTT send completion when CE 5 is unused

commit a70587b3 ("ath10k: configure copy engine 5 for HTT messages")
moved send completion polling under HTT Rx (CE 5) service routine. For
QCA6174 based devices copy engine 1 (CE 1) is used for HTT Rx instead
of CE 5. So send completion never be called. This is causing "failed to
transmit packet, dropping: -105" errors. Fix this by processing send
completion from CE 1 service routine instead of CE 5.

Fixes: a70587b3 ("ath10k: configure copy engine 5 for HTT messages")
Tested-by: NRyan Hsu <ryanhsu@qca.qualcomm.com>
Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/pci.c

@@ -107,6 +107,7 @@ static void ath10k_pci_htc_tx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htt_rx_cb(struct ath10k_ce_pipe *ce_state);
+static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state);
 
 static struct ce_attr host_ce_config_wlan[] = {
 	/* CE0: host->target HTC control and raw streams */
@@ -124,7 +125,7 @@ static struct ce_attr host_ce_config_wlan[] = {
 		.src_nentries = 0,
 		.src_sz_max = 2048,
 		.dest_nentries = 512,
-		.recv_cb = ath10k_pci_htc_rx_cb,
+		.recv_cb = ath10k_pci_htt_htc_rx_cb,
 	},
 
 	/* CE2: target->host WMI */
@@ -1204,6 +1205,16 @@ static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state)
 	ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler);
 }
 
+static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state)
+{
+	/* CE4 polling needs to be done whenever CE pipe which transports
+	 * HTT Rx (target->host) is processed.
+	 */
+	ath10k_ce_per_engine_service(ce_state->ar, 4);
+
+	ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler);
+}
+
 /* Called by lower (CE) layer when a send to HTT Target completes. */
 static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state)
 {