提交 605c82ba 编写于 作者: B Bruce Allan 提交者: David S. Miller

e1000e: 82579 do not gate auto config of PHY by hardware during nominal use

For non-managed versions of 82579, set the bit that prevents the hardware
from automatically configuring the PHY after resets only when the driver
performs a reset, clear the bit after resets.  This is so the hardware can
configure the PHY automatically when the part is reset in a manner that is
not controlled by the driver (e.g. in a virtual environment via PCI FLR)
otherwise the PHY will be mis-configured causing issues such as failing to
link at 1000Mbps.
For managed versions of 82579, keep the previous behavior since the
manageability firmware will handle the PHY configuration.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 a1ce6473
......@@ -243,6 +243,7 @@ static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
......@@ -278,7 +279,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
u32 ctrl;
u32 ctrl, fwsm;
s32 ret_val = 0;
phy->addr = 1;
......@@ -300,7 +301,8 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
* disabled, then toggle the LANPHYPC Value bit to force
* the interconnect to PCIe mode.
*/
if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
fwsm = er32(FWSM);
if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) {
ctrl = er32(CTRL);
ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
......@@ -309,6 +311,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
ew32(CTRL, ctrl);
msleep(50);
/*
* Gate automatic PHY configuration by hardware on
* non-managed 82579
*/
if (hw->mac.type == e1000_pch2lan)
e1000_gate_hw_phy_config_ich8lan(hw, true);
}
/*
......@@ -321,6 +330,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
if (ret_val)
goto out;
/* Ungate automatic PHY configuration on non-managed 82579 */
if ((hw->mac.type == e1000_pch2lan) &&
!(fwsm & E1000_ICH_FWSM_FW_VALID)) {
msleep(10);
e1000_gate_hw_phy_config_ich8lan(hw, false);
}
phy->id = e1000_phy_unknown;
ret_val = e1000e_get_phy_id(hw);
if (ret_val)
......@@ -567,13 +583,10 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
if (mac->type == e1000_ich8lan)
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
/* Disable PHY configuration by hardware, config by software */
if (mac->type == e1000_pch2lan) {
u32 extcnf_ctrl = er32(EXTCNF_CTRL);
extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
}
/* Gate automatic PHY configuration by hardware on managed 82579 */
if ((mac->type == e1000_pch2lan) &&
(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
e1000_gate_hw_phy_config_ich8lan(hw, true);
return 0;
}
......@@ -1620,6 +1633,32 @@ static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
return ret_val;
}
/**
* e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware
* @hw: pointer to the HW structure
* @gate: boolean set to true to gate, false to ungate
*
* Gate/ungate the automatic PHY configuration via hardware; perform
* the configuration via software instead.
**/
static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate)
{
u32 extcnf_ctrl;
if (hw->mac.type != e1000_pch2lan)
return;
extcnf_ctrl = er32(EXTCNF_CTRL);
if (gate)
extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
else
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
return;
}
/**
* e1000_lan_init_done_ich8lan - Check for PHY config completion
* @hw: pointer to the HW structure
......@@ -1695,6 +1734,13 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
/* Configure the LCD with the OEM bits in NVM */
ret_val = e1000_oem_bits_config_ich8lan(hw, true);
/* Ungate automatic PHY configuration on non-managed 82579 */
if ((hw->mac.type == e1000_pch2lan) &&
!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
msleep(10);
e1000_gate_hw_phy_config_ich8lan(hw, false);
}
out:
return ret_val;
}
......@@ -1711,6 +1757,11 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
{
s32 ret_val = 0;
/* Gate automatic PHY configuration by hardware on non-managed 82579 */
if ((hw->mac.type == e1000_pch2lan) &&
!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
e1000_gate_hw_phy_config_ich8lan(hw, true);
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
goto out;
......@@ -2975,6 +3026,14 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
* external PHY is reset.
*/
ctrl |= E1000_CTRL_PHY_RST;
/*
* Gate automatic PHY configuration by hardware on
* non-managed 82579
*/
if ((hw->mac.type == e1000_pch2lan) &&
!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
e1000_gate_hw_phy_config_ich8lan(hw, true);
}
ret_val = e1000_acquire_swflag_ich8lan(hw);
e_dbg("Issuing a global reset to ich8lan\n");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册