drm/i915: Hold dev->event_lock whilst inspecting intel_crtc->unpin_work

We should serialise access to the intel_crtc->unpin_work through the
dev->event_lock spinlock. It should not be possible for it to disappear
without severe error as the mmio_flip worker has not tagged the
unpin_work pending flip-completion. Similarly if the error exists, just
taking the unpin_work whilst holding the spinlock and then using it
unserialised just masks the race. (It is supposed to be valid as the
unpin_work exists until the flip completion interrupt which should not
fire until we flush the mmio writes to update the display base which is
the last time we access the unpin_work from the kthread.)

References: https://bugs.freedesktop.org/show_bug.cgi?id=92335Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_display.c

@@ -10848,11 +10848,11 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane)
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 }
 
-static inline void intel_mark_page_flip_active(struct intel_crtc *intel_crtc)
+static inline void intel_mark_page_flip_active(struct intel_unpin_work *work)
 {
 	/* Ensure that the work item is consistent when activating it ... */
 	smp_wmb();
-	atomic_set(&intel_crtc->unpin_work->pending, INTEL_FLIP_PENDING);
+	atomic_set(&work->pending, INTEL_FLIP_PENDING);
 	/* and that it is marked active as soon as the irq could fire. */
 	smp_wmb();
 }
@@ -10888,7 +10888,7 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 	intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
 	intel_ring_emit(ring, 0); /* aux display base address, unused */
 
-	intel_mark_page_flip_active(intel_crtc);
+	intel_mark_page_flip_active(intel_crtc->unpin_work);
 	return 0;
 }
 
@@ -10920,7 +10920,7 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 	intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
 	intel_ring_emit(ring, MI_NOOP);
 
-	intel_mark_page_flip_active(intel_crtc);
+	intel_mark_page_flip_active(intel_crtc->unpin_work);
 	return 0;
 }
 
@@ -10959,7 +10959,7 @@ static int intel_gen4_queue_flip(struct drm_device *dev,
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	intel_ring_emit(ring, pf | pipesrc);
 
-	intel_mark_page_flip_active(intel_crtc);
+	intel_mark_page_flip_active(intel_crtc->unpin_work);
 	return 0;
 }
 
@@ -10995,7 +10995,7 @@ static int intel_gen6_queue_flip(struct drm_device *dev,
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	intel_ring_emit(ring, pf | pipesrc);
 
-	intel_mark_page_flip_active(intel_crtc);
+	intel_mark_page_flip_active(intel_crtc->unpin_work);
 	return 0;
 }
 
@@ -11090,7 +11090,7 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
 	intel_ring_emit(ring, intel_crtc->unpin_work->gtt_offset);
 	intel_ring_emit(ring, (MI_NOOP));
 
-	intel_mark_page_flip_active(intel_crtc);
+	intel_mark_page_flip_active(intel_crtc->unpin_work);
 	return 0;
 }
 
@@ -11121,7 +11121,8 @@ static bool use_mmio_flip(struct intel_engine_cs *ring,
 		return ring != i915_gem_request_get_ring(obj->last_write_req);
 }
 
-static void skl_do_mmio_flip(struct intel_crtc *intel_crtc)
+static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
+			     struct intel_unpin_work *work)
 {
 	struct drm_device *dev = intel_crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -11162,11 +11163,12 @@ static void skl_do_mmio_flip(struct intel_crtc *intel_crtc)
 	I915_WRITE(PLANE_CTL(pipe, 0), ctl);
 	I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
 
-	I915_WRITE(PLANE_SURF(pipe, 0), intel_crtc->unpin_work->gtt_offset);
+	I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset);
 	POSTING_READ(PLANE_SURF(pipe, 0));
 }
 
-static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc)
+static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
+			     struct intel_unpin_work *work)
 {
 	struct drm_device *dev = intel_crtc->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -11186,31 +11188,36 @@ static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc)
 
 	I915_WRITE(reg, dspcntr);
 
-	I915_WRITE(DSPSURF(intel_crtc->plane),
-		   intel_crtc->unpin_work->gtt_offset);
+	I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset);
 	POSTING_READ(DSPSURF(intel_crtc->plane));
-
 }
 
 /*
  * XXX: This is the temporary way to update the plane registers until we get
  * around to using the usual plane update functions for MMIO flips
  */
-static void intel_do_mmio_flip(struct intel_crtc *intel_crtc)
+static void intel_do_mmio_flip(struct intel_mmio_flip *mmio_flip)
 {
-	struct drm_device *dev = intel_crtc->base.dev;
+	struct intel_crtc *crtc = mmio_flip->crtc;
+	struct intel_unpin_work *work;
 
-	intel_mark_page_flip_active(intel_crtc);
+	spin_lock_irq(&crtc->base.dev->event_lock);
+	work = crtc->unpin_work;
+	spin_unlock_irq(&crtc->base.dev->event_lock);
+	if (work == NULL)
+		return;
 
-	intel_pipe_update_start(intel_crtc);
+	intel_mark_page_flip_active(work);
 
-	if (INTEL_INFO(dev)->gen >= 9)
-		skl_do_mmio_flip(intel_crtc);
+	intel_pipe_update_start(crtc);
+
+	if (INTEL_INFO(mmio_flip->i915)->gen >= 9)
+		skl_do_mmio_flip(crtc, work);
 	else
 		/* use_mmio_flip() retricts MMIO flips to ilk+ */
-		ilk_do_mmio_flip(intel_crtc);
+		ilk_do_mmio_flip(crtc, work);
 
-	intel_pipe_update_end(intel_crtc);
+	intel_pipe_update_end(crtc);
 }
 
 static void intel_mmio_flip_work_func(struct work_struct *work)
@@ -11218,15 +11225,15 @@ static void intel_mmio_flip_work_func(struct work_struct *work)
 	struct intel_mmio_flip *mmio_flip =
 		container_of(work, struct intel_mmio_flip, work);
 
-	if (mmio_flip->req)
+	if (mmio_flip->req) {
 		WARN_ON(__i915_wait_request(mmio_flip->req,
 					    mmio_flip->crtc->reset_counter,
 					    false, NULL,
 					    &mmio_flip->i915->rps.mmioflips));
+		i915_gem_request_unreference__unlocked(mmio_flip->req);
+	}
 
-	intel_do_mmio_flip(mmio_flip->crtc);
-
-	i915_gem_request_unreference__unlocked(mmio_flip->req);
+	intel_do_mmio_flip(mmio_flip);
 	kfree(mmio_flip);
 }