提交 5d98cd4e 编写于 作者: H Hauke Mehrtens 提交者: Greg Kroah-Hartman

USB: use generic platform driver on ath79

The ath79 usb driver doesn't do anything special and is now converted
to the generic ehci and ohci driver.
This was tested on a TP-Link TL-WR1043ND (AR9132)
Acked-by: NGabor Juhos <juhosg@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
CC: linux-mips@linux-mips.org
CC: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 7a7a4a59
......@@ -17,6 +17,8 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/usb/ehci_pdriver.h>
#include <linux/usb/ohci_pdriver.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
......@@ -36,14 +38,19 @@ static struct resource ath79_ohci_resources[] = {
};
static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32);
static struct usb_ohci_pdata ath79_ohci_pdata = {
};
static struct platform_device ath79_ohci_device = {
.name = "ath79-ohci",
.name = "ohci-platform",
.id = -1,
.resource = ath79_ohci_resources,
.num_resources = ARRAY_SIZE(ath79_ohci_resources),
.dev = {
.dma_mask = &ath79_ohci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ath79_ohci_pdata,
},
};
......@@ -60,8 +67,20 @@ static struct resource ath79_ehci_resources[] = {
};
static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32);
static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
.has_synopsys_hc_bug = 1,
.port_power_off = 1,
};
static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
.caps_offset = 0x100,
.has_tt = 1,
.port_power_off = 1,
};
static struct platform_device ath79_ehci_device = {
.name = "ath79-ehci",
.name = "ehci-platform",
.id = -1,
.resource = ath79_ehci_resources,
.num_resources = ARRAY_SIZE(ath79_ehci_resources),
......@@ -101,7 +120,7 @@ static void __init ath79_usb_setup(void)
ath79_ehci_resources[0].start = AR71XX_EHCI_BASE;
ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1;
ath79_ehci_device.name = "ar71xx-ehci";
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v1;
platform_device_register(&ath79_ehci_device);
}
......@@ -142,7 +161,7 @@ static void __init ar724x_usb_setup(void)
ath79_ehci_resources[0].start = AR724X_EHCI_BASE;
ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1;
ath79_ehci_device.name = "ar724x-ehci";
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
platform_device_register(&ath79_ehci_device);
}
......@@ -159,7 +178,7 @@ static void __init ar913x_usb_setup(void)
ath79_ehci_resources[0].start = AR913X_EHCI_BASE;
ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1;
ath79_ehci_device.name = "ar913x-ehci";
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
platform_device_register(&ath79_ehci_device);
}
......@@ -176,7 +195,7 @@ static void __init ar933x_usb_setup(void)
ath79_ehci_resources[0].start = AR933X_EHCI_BASE;
ath79_ehci_resources[0].end = AR933X_EHCI_BASE + AR933X_EHCI_SIZE - 1;
ath79_ehci_device.name = "ar933x-ehci";
ath79_ehci_device.dev.platform_data = &ath79_ehci_pdata_v2;
platform_device_register(&ath79_ehci_device);
}
......
......@@ -222,11 +222,15 @@ config USB_CNS3XXX_EHCI
support.
config USB_EHCI_ATH79
bool "EHCI support for AR7XXX/AR9XXX SoCs"
bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
depends on USB_EHCI_HCD && (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
select USB_EHCI_ROOT_HUB_TT
select USB_EHCI_HCD_PLATFORM
default y
---help---
This option is deprecated now and the driver was removed, use
USB_EHCI_HCD_PLATFORM instead.
Enables support for the built-in EHCI controller present
on the Atheros AR7XXX/AR9XXX SoCs.
......@@ -316,10 +320,14 @@ config USB_OHCI_HCD_OMAP3
OMAP3 and later chips.
config USB_OHCI_ATH79
bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs"
bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
depends on USB_OHCI_HCD && (SOC_AR71XX || SOC_AR724X)
select USB_OHCI_HCD_PLATFORM
default y
help
This option is deprecated now and the driver was removed, use
USB_OHCI_HCD_PLATFORM instead.
Enables support for the built-in OHCI controller present on the
Atheros AR71XX/AR7240 SoCs.
......
/*
* Bus Glue for Atheros AR7XXX/AR9XXX built-in EHCI controller.
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
* Copyright (C) 2007 Atheros Communications, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
enum {
EHCI_ATH79_IP_V1 = 0,
EHCI_ATH79_IP_V2,
};
static const struct platform_device_id ehci_ath79_id_table[] = {
{
.name = "ar71xx-ehci",
.driver_data = EHCI_ATH79_IP_V1,
},
{
.name = "ar724x-ehci",
.driver_data = EHCI_ATH79_IP_V2,
},
{
.name = "ar913x-ehci",
.driver_data = EHCI_ATH79_IP_V2,
},
{
.name = "ar933x-ehci",
.driver_data = EHCI_ATH79_IP_V2,
},
{
/* terminating entry */
},
};
MODULE_DEVICE_TABLE(platform, ehci_ath79_id_table);
static int ehci_ath79_init(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct platform_device *pdev = to_platform_device(hcd->self.controller);
const struct platform_device_id *id;
int ret;
id = platform_get_device_id(pdev);
if (!id) {
dev_err(hcd->self.controller, "missing device id\n");
return -EINVAL;
}
switch (id->driver_data) {
case EHCI_ATH79_IP_V1:
ehci->has_synopsys_hc_bug = 1;
ehci->caps = hcd->regs;
ehci->regs = hcd->regs +
HC_LENGTH(ehci,
ehci_readl(ehci, &ehci->caps->hc_capbase));
break;
case EHCI_ATH79_IP_V2:
hcd->has_tt = 1;
ehci->caps = hcd->regs + 0x100;
ehci->regs = hcd->regs + 0x100 +
HC_LENGTH(ehci,
ehci_readl(ehci, &ehci->caps->hc_capbase));
break;
default:
BUG();
}
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
ehci->sbrn = 0x20;
ehci_reset(ehci);
ret = ehci_init(hcd);
if (ret)
return ret;
ehci_port_power(ehci, 0);
return 0;
}
static const struct hc_driver ehci_ath79_hc_driver = {
.description = hcd_name,
.product_desc = "Atheros built-in EHCI controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_USB2,
.reset = ehci_ath79_init,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
.get_frame_number = ehci_get_frame,
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_ath79_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct resource *res;
int irq;
int ret;
if (usb_disabled())
return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_dbg(&pdev->dev, "no IRQ specified\n");
return -ENODEV;
}
irq = res->start;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_dbg(&pdev->dev, "no base address specified\n");
return -ENODEV;
}
hcd = usb_create_hcd(&ehci_ath79_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dev_dbg(&pdev->dev, "controller already in use\n");
ret = -EBUSY;
goto err_put_hcd;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_dbg(&pdev->dev, "error mapping memory\n");
ret = -EFAULT;
goto err_release_region;
}
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto err_iounmap;
return 0;
err_iounmap:
iounmap(hcd->regs);
err_release_region:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err_put_hcd:
usb_put_hcd(hcd);
return ret;
}
static int ehci_ath79_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
return 0;
}
static struct platform_driver ehci_ath79_driver = {
.probe = ehci_ath79_probe,
.remove = ehci_ath79_remove,
.id_table = ehci_ath79_id_table,
.driver = {
.owner = THIS_MODULE,
.name = "ath79-ehci",
}
};
MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ath79-ehci");
......@@ -1351,11 +1351,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER s5p_ehci_driver
#endif
#ifdef CONFIG_USB_EHCI_ATH79
#include "ehci-ath79.c"
#define PLATFORM_DRIVER ehci_ath79_driver
#endif
#ifdef CONFIG_SPARC_LEON
#include "ehci-grlib.c"
#define PLATFORM_DRIVER ehci_grlib_driver
......
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* Bus Glue for Atheros AR71XX/AR724X built-in OHCI controller.
*
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
* Copyright (C) 2007 Atheros Communications, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
static int __devinit ohci_ath79_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
ret = ohci_init(ohci);
if (ret < 0)
return ret;
ret = ohci_run(ohci);
if (ret < 0)
goto err;
return 0;
err:
ohci_stop(hcd);
return ret;
}
static const struct hc_driver ohci_ath79_hc_driver = {
.description = hcd_name,
.product_desc = "Atheros built-in OHCI controller",
.hcd_priv_size = sizeof(struct ohci_hcd),
.irq = ohci_irq,
.flags = HCD_USB11 | HCD_MEMORY,
.start = ohci_ath79_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
.start_port_reset = ohci_start_port_reset,
};
static int ohci_ath79_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct resource *res;
int irq;
int ret;
if (usb_disabled())
return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res) {
dev_dbg(&pdev->dev, "no IRQ specified\n");
return -ENODEV;
}
irq = res->start;
hcd = usb_create_hcd(&ohci_ath79_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_dbg(&pdev->dev, "no base address specified\n");
ret = -ENODEV;
goto err_put_hcd;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dev_dbg(&pdev->dev, "controller already in use\n");
ret = -EBUSY;
goto err_put_hcd;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_dbg(&pdev->dev, "error mapping memory\n");
ret = -EFAULT;
goto err_release_region;
}
ohci_hcd_init(hcd_to_ohci(hcd));
ret = usb_add_hcd(hcd, irq, 0);
if (ret)
goto err_stop_hcd;
return 0;
err_stop_hcd:
iounmap(hcd->regs);
err_release_region:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err_put_hcd:
usb_put_hcd(hcd);
return ret;
}
static int ohci_ath79_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
return 0;
}
static struct platform_driver ohci_hcd_ath79_driver = {
.probe = ohci_ath79_probe,
.remove = ohci_ath79_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "ath79-ohci",
.owner = THIS_MODULE,
},
};
MODULE_ALIAS(PLATFORM_MODULE_PREFIX "ath79-ohci");
......@@ -1111,11 +1111,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver
#endif
#ifdef CONFIG_USB_OHCI_ATH79
#include "ohci-ath79.c"
#define PLATFORM_DRIVER ohci_hcd_ath79_driver
#endif
#ifdef CONFIG_CPU_XLR
#include "ohci-xls.c"
#define PLATFORM_DRIVER ohci_xls_driver
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册