Merge branch 'for-linus' of...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k into next

Pull m68k updates from Geert Uytterhoeven:
 "Highlights:
   - support for running kernels in fast TT-RAM instead of slow ST-RAM
     on Atari
   - multi-platform EARLY_PRINTK
   - better support for machines with lots of RAM (think ARAnyM), and
     for running kernels larger than 4 MiB (think multi-platform)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/hp300: Convert printk to pr_foo()
  m68k/apollo: Convert printk to pr_foo()
  m68k/amiga: Convert printk(foo to pr_foo()
  m68k: Increase initial mapping to 8 or 16 MiB if possible
  m68k: Update defconfigs for v3.15-rc2
  m68k/atari: fix SCC initialization for debug console
  m68k/mvme16x: Adopt common boot console
  m68k: Multi-platform EARLY_PRINTK
  m68k: Toward platform agnostic framebuffer debug logging
  m68k/atari - atari_scsi: use correct virt/phys translation for DMA buffer
  m68k/atari - ataflop: use correct virt/phys translation for DMA buffer
  m68k/atari - atafb: convert allocation of fb ram to new interface
  m68k/atari - stram: alloc ST-RAM pool even if kernel not in ST-RAM

Documentation/kernel-parameters.txt

@@ -892,7 +892,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			(mmio) or 32-bit (mmio32).
 			The options are the same as for ttyS, above.
 
-	earlyprintk=	[X86,SH,BLACKFIN,ARM]
+	earlyprintk=	[X86,SH,BLACKFIN,ARM,M68k]
 			earlyprintk=vga
 			earlyprintk=efi
 			earlyprintk=xen

arch/m68k/Kconfig.debug

@@ -12,12 +12,17 @@ config BOOTPARAM_STRING
 
 config EARLY_PRINTK
 	bool "Early printk"
-	depends on MVME16x || MAC
+	depends on !(SUN3 || M68360 || M68000 || COLDFIRE)
 	help
           Write kernel log output directly to a serial port.
+          Where implemented, output goes to the framebuffer as well.
+          PROM console functionality on Sun 3x is not affected by this option.
+
+          Pass "earlyprintk" on the kernel command line to get a
+          boot console.
 
           This is useful for kernel debugging when your machine crashes very
-          early before the console code is initialized.
+          early, i.e. before the normal console driver is loaded.
           You should normally say N here, unless you want to debug such a crash.
 
 if !MMU

arch/m68k/amiga/amisound.c

@@ -51,7 +51,7 @@ void __init amiga_init_sound(void)
 
 	snd_data = amiga_chip_alloc_res(sizeof(sine_data), &beep_res);
 	if (!snd_data) {
-		printk (KERN_CRIT "amiga init_sound: failed to allocate chipmem\n");
+		pr_crit("amiga init_sound: failed to allocate chipmem\n");
 		return;
 	}
 	memcpy (snd_data, sine_data, sizeof(sine_data));

arch/m68k/amiga/config.c

@@ -183,7 +183,7 @@ int __init amiga_parse_bootinfo(const struct bi_record *record)
 			dev->boardaddr = be32_to_cpu(cd->cd_BoardAddr);
 			dev->boardsize = be32_to_cpu(cd->cd_BoardSize);
 		} else
-			printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
+			pr_warn("amiga_parse_bootinfo: too many AutoConfig devices\n");
 #endif /* CONFIG_ZORRO */
 		break;
 
@@ -209,9 +209,9 @@ static void __init amiga_identify(void)
 
 	memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
 
-	printk("Amiga hardware found: ");
+	pr_info("Amiga hardware found: ");
 	if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
-		printk("[%s] ", amiga_models[amiga_model-AMI_500]);
+		pr_cont("[%s] ", amiga_models[amiga_model-AMI_500]);
 		strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
 	}
 
@@ -322,7 +322,7 @@ static void __init amiga_identify(void)
 
 #define AMIGAHW_ANNOUNCE(name, str)		\
 	if (AMIGAHW_PRESENT(name))		\
-		printk(str)
+		pr_cont(str)
 
 	AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
 	AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
@@ -354,8 +354,8 @@ static void __init amiga_identify(void)
 	AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
 	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
 	if (AMIGAHW_PRESENT(ZORRO))
-		printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
-	printk("\n");
+		pr_cont("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
+	pr_cont("\n");
 
 #undef AMIGAHW_ANNOUNCE
 }
@@ -424,7 +424,7 @@ void __init config_amiga(void)
 			if (m68k_memory[i].addr < 16*1024*1024) {
 				if (i == 0) {
 					/* don't cut off the branch we're sitting on */
-					printk("Warning: kernel runs in Zorro II memory\n");
+					pr_warn("Warning: kernel runs in Zorro II memory\n");
 					continue;
 				}
 				disabled_z2mem += m68k_memory[i].size;
@@ -435,8 +435,8 @@ void __init config_amiga(void)
 			}
 		}
 		if (disabled_z2mem)
-		printk("%dK of Zorro II memory will not be used as system memory\n",
-		disabled_z2mem>>10);
+			pr_info("%dK of Zorro II memory will not be used as system memory\n",
+				disabled_z2mem>>10);
 	}
 
 	/* request all RAM */
@@ -475,7 +475,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
 	jiffy_ticks = DIV_ROUND_CLOSEST(amiga_eclock, HZ);
 
 	if (request_resource(&mb_resources._ciab, &sched_res))
-		printk("Cannot allocate ciab.ta{lo,hi}\n");
+		pr_warn("Cannot allocate ciab.ta{lo,hi}\n");
 	ciab.cra &= 0xC0;   /* turn off timer A, continuous mode, from Eclk */
 	ciab.talo = jiffy_ticks % 256;
 	ciab.tahi = jiffy_ticks / 256;

arch/m68k/apollo/config.c

@@ -65,8 +65,8 @@ int __init apollo_parse_bootinfo(const struct bi_record *record)
 
 static void __init dn_setup_model(void)
 {
-	printk("Apollo hardware found: ");
-	printk("[%s]\n", apollo_models[apollo_model - APOLLO_DN3000]);
+	pr_info("Apollo hardware found: [%s]\n",
+		apollo_models[apollo_model - APOLLO_DN3000]);
 
 	switch(apollo_model) {
 		case APOLLO_UNKNOWN:
@@ -197,8 +197,10 @@ void dn_sched_init(irq_handler_t timer_routine)
 	*(volatile unsigned char *)(pica+1)&=(~8);
 
 #if 0
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
-	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3));
+	pr_info("*(0x10803) %02x\n",
+		*(volatile unsigned char *)(apollo_timer + 0x3));
+	pr_info("*(0x10803) %02x\n",
+		*(volatile unsigned char *)(apollo_timer + 0x3));
 #endif
 
 	if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
@@ -236,12 +238,10 @@ int dn_dummy_hwclk(int op, struct rtc_time *t) {
 
 }
 
-int dn_dummy_set_clock_mmss(unsigned long nowtime) {
-
-  printk("set_clock_mmss\n");
-
-  return 0;
-
+int dn_dummy_set_clock_mmss(unsigned long nowtime)
+{
+	pr_info("set_clock_mmss\n");
+	return 0;
 }
 
 void dn_dummy_reset(void) {

arch/m68k/atari/stram.c

@@ -47,6 +47,7 @@ static struct resource stram_pool = {
 
 static unsigned long pool_size = 1024*1024;
 
+static unsigned long stram_virt_offset;
 
 static int __init atari_stram_setup(char *arg)
 {
@@ -67,14 +68,12 @@ early_param("stram_pool", atari_stram_setup);
 void __init atari_stram_init(void)
 {
 	int i;
-	void *stram_start;
 
 	/*
 	 * determine whether kernel code resides in ST-RAM
 	 * (then ST-RAM is the first memory block at virtual 0x0)
 	 */
-	stram_start = phys_to_virt(0);
-	kernel_in_stram = (stram_start == 0);
+	kernel_in_stram = (m68k_memory[0].addr == 0);
 
 	for (i = 0; i < m68k_num_memory; ++i) {
 		if (m68k_memory[i].addr == 0) {
@@ -89,24 +88,62 @@ void __init atari_stram_init(void)
 
 /*
  * This function is called from setup_arch() to reserve the pages needed for
- * ST-RAM management.
+ * ST-RAM management, if the kernel resides in ST-RAM.
  */
 void __init atari_stram_reserve_pages(void *start_mem)
 {
-	/*
-	 * always reserve first page of ST-RAM, the first 2 KiB are
-	 * supervisor-only!
-	 */
-	if (!kernel_in_stram)
-		reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
+	if (kernel_in_stram) {
+		pr_debug("atari_stram pool: kernel in ST-RAM, using alloc_bootmem!\n");
+		stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size);
+		stram_pool.end = stram_pool.start + pool_size - 1;
+		request_resource(&iomem_resource, &stram_pool);
+		stram_virt_offset = 0;
+		pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
+			pool_size, &stram_pool);
+		pr_debug("atari_stram pool: stram_virt_offset = %lx\n",
+			stram_virt_offset);
+	}
+}
 
-	stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size);
-	stram_pool.end = stram_pool.start + pool_size - 1;
-	request_resource(&iomem_resource, &stram_pool);
 
-	pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
-		 pool_size, &stram_pool);
+/*
+ * This function is called as arch initcall to reserve the pages needed for
+ * ST-RAM management, if the kernel does not reside in ST-RAM.
+ */
+int __init atari_stram_map_pages(void)
+{
+	if (!kernel_in_stram) {
+		/*
+		 * Skip page 0, as the fhe first 2 KiB are supervisor-only!
+		 */
+		pr_debug("atari_stram pool: kernel not in ST-RAM, using ioremap!\n");
+		stram_pool.start = PAGE_SIZE;
+		stram_pool.end = stram_pool.start + pool_size - 1;
+		request_resource(&iomem_resource, &stram_pool);
+		stram_virt_offset = (unsigned long) ioremap(stram_pool.start,
+				resource_size(&stram_pool)) - stram_pool.start;
+		pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n",
+			pool_size, &stram_pool);
+		pr_debug("atari_stram pool: stram_virt_offset = %lx\n",
+			stram_virt_offset);
+	}
+	return 0;
+}
+arch_initcall(atari_stram_map_pages);
+
+
+void *atari_stram_to_virt(unsigned long phys)
+{
+	return (void *)(phys + stram_virt_offset);
+}
+EXPORT_SYMBOL(atari_stram_to_virt);
+
+
+unsigned long atari_stram_to_phys(void *virt)
+{
+	return (unsigned long)(virt - stram_virt_offset);
 }
+EXPORT_SYMBOL(atari_stram_to_phys);
 
 
 void *atari_stram_alloc(unsigned long size, const char *owner)
@@ -134,14 +171,14 @@ void *atari_stram_alloc(unsigned long size, const char *owner)
 	}
 
 	pr_debug("atari_stram_alloc: returning %pR\n", res);
-	return (void *)res->start;
+	return atari_stram_to_virt(res->start);
 }
 EXPORT_SYMBOL(atari_stram_alloc);
 
 
 void atari_stram_free(void *addr)
 {
-	unsigned long start = (unsigned long)addr;
+	unsigned long start = atari_stram_to_phys(addr);
 	struct resource *res;
 	unsigned long size;
 

arch/m68k/configs/amiga_defconfig

@@ -159,6 +159,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -227,6 +228,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -279,6 +281,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -305,7 +308,6 @@ CONFIG_VETH=m
 CONFIG_A2065=y
 CONFIG_ARIADNE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_HP is not set
@@ -315,6 +317,7 @@ CONFIG_ARIADNE=y
 CONFIG_HYDRA=y
 CONFIG_APNE=y
 CONFIG_ZORRO8390=y
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set

arch/m68k/configs/apollo_defconfig

@@ -157,6 +157,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -225,6 +226,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -261,6 +263,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -284,12 +287,12 @@ CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set

arch/m68k/configs/atari_defconfig

@@ -156,6 +156,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -224,6 +225,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -269,6 +271,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -293,11 +296,11 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_ATARILANCE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set

arch/m68k/configs/bvme6000_defconfig

@@ -155,6 +155,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -223,6 +224,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -260,6 +262,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -283,12 +286,12 @@ CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_BVME6000_NET=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set

arch/m68k/configs/hp300_defconfig

@@ -157,6 +157,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -225,6 +226,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -261,6 +263,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -285,12 +288,12 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set

arch/m68k/configs/mac_defconfig

@@ -156,6 +156,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -227,6 +228,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -270,6 +272,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -301,7 +304,6 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_MACMACE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_MAC89x0=y
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -309,6 +311,7 @@ CONFIG_MAC89x0=y
 # CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_MACSONIC=y
 CONFIG_MAC8390=y
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set

arch/m68k/configs/multi_defconfig

@@ -165,6 +165,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -236,6 +237,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -302,6 +304,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -340,7 +343,6 @@ CONFIG_MVME147_NET=y
 CONFIG_SUN3LANCE=y
 CONFIG_MACMACE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_MAC89x0=y
 # CONFIG_NET_VENDOR_HP is not set
@@ -354,6 +356,7 @@ CONFIG_MAC8390=y
 CONFIG_NE2000=m
 CONFIG_APNE=y
 CONFIG_ZORRO8390=y
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set

arch/m68k/configs/mvme147_defconfig

@@ -154,6 +154,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -222,6 +223,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -259,6 +261,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -283,12 +286,12 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_MVME147_NET=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set

arch/m68k/configs/mvme16x_defconfig

@@ -155,6 +155,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -223,6 +224,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -260,6 +262,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -283,12 +286,12 @@ CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_MVME16x_NET=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set

arch/m68k/configs/q40_defconfig

@@ -155,6 +155,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -223,6 +224,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -266,6 +268,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -291,7 +294,6 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_AMD is not set
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_HP is not set
@@ -299,6 +301,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_NE2000=m
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set

arch/m68k/configs/sun3_defconfig

@@ -152,6 +152,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -220,6 +221,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -257,6 +259,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -281,11 +284,11 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_SUN3LANCE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 CONFIG_SUN3_82586=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_SUN is not set

arch/m68k/configs/sun3x_defconfig

@@ -152,6 +152,7 @@ CONFIG_IP_SET_BITMAP_IP=m
 CONFIG_IP_SET_BITMAP_IPMAC=m
 CONFIG_IP_SET_BITMAP_PORT=m
 CONFIG_IP_SET_HASH_IP=m
+CONFIG_IP_SET_HASH_IPMARK=m
 CONFIG_IP_SET_HASH_IPPORT=m
 CONFIG_IP_SET_HASH_IPPORTIP=m
 CONFIG_IP_SET_HASH_IPPORTNET=m
@@ -220,6 +221,7 @@ CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
 CONFIG_BATMAN_ADV_NC=y
+CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_NETLINK_DIAG=m
 CONFIG_NET_MPLS_GSO=m
 # CONFIG_WIRELESS is not set
@@ -257,6 +259,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_RAID=m
 CONFIG_DM_ZERO=m
@@ -281,12 +284,12 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 CONFIG_SUN3LANCE=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set

arch/m68k/hp300/config.c

@@ -87,7 +87,7 @@ int __init hp300_parse_bootinfo(const struct bi_record *record)
 		/* serial port address: ignored here */
 		break;
 
-        default:
+	default:
 		unknown = 1;
 	}
 
@@ -262,11 +262,12 @@ void __init config_hp300(void)
 #endif
 	mach_max_dma_address = 0xffffffff;
 
-	if (hp300_model >= HP_330 && hp300_model <= HP_433S && hp300_model != HP_350) {
-		printk(KERN_INFO "Detected HP9000 model %s\n", hp300_models[hp300_model-HP_320]);
+	if (hp300_model >= HP_330 && hp300_model <= HP_433S &&
+	    hp300_model != HP_350) {
+		pr_info("Detected HP9000 model %s\n",
+			hp300_models[hp300_model-HP_320]);
 		strcat(hp300_model_name, hp300_models[hp300_model-HP_320]);
-	}
-	else {
+	} else {
 		panic("Unknown HP9000 Model");
 	}
 #ifdef CONFIG_SERIAL_8250_CONSOLE

arch/m68k/include/asm/atari_stram.h

@@ -8,6 +8,8 @@
 /* public interface */
 void *atari_stram_alloc(unsigned long size, const char *owner);
 void atari_stram_free(void *);
+void *atari_stram_to_virt(unsigned long phys);
+unsigned long atari_stram_to_phys(void *);
 
 /* functions called internally by other parts of the kernel */
 void atari_stram_init(void);

arch/m68k/kernel/Makefile

@@ -25,3 +25,5 @@ obj-$(CONFIG_HAS_DMA)	+= dma.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_BOOTINFO_PROC)	+= bootinfo_proc.o
 
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+

arch/m68k/kernel/early_printk.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2014 Finn Thain
+ */
+
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/setup.h>
+
+extern void mvme16x_cons_write(struct console *co,
+			       const char *str, unsigned count);
+
+asmlinkage void __init debug_cons_nputs(const char *s, unsigned n);
+
+static void __ref debug_cons_write(struct console *c,
+				   const char *s, unsigned n)
+{
+#if !(defined(CONFIG_SUN3)   || defined(CONFIG_M68360) || \
+      defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE))
+	if (MACH_IS_MVME16x)
+		mvme16x_cons_write(c, s, n);
+	else
+		debug_cons_nputs(s, n);
+#endif
+}
+
+static struct console early_console_instance = {
+	.name  = "debug",
+	.write = debug_cons_write,
+	.flags = CON_PRINTBUFFER | CON_BOOT,
+	.index = -1
+};
+
+static int __init setup_early_printk(char *buf)
+{
+	if (early_console || buf)
+		return 0;
+
+	early_console = &early_console_instance;
+	register_console(early_console);
+
+	return 0;
+}
+early_param("earlyprintk", setup_early_printk);
+
+/*
+ * debug_cons_nputs() defined in arch/m68k/kernel/head.S cannot be called
+ * after init sections are discarded (for platforms that use it).
+ */
+#if !(defined(CONFIG_SUN3)   || defined(CONFIG_M68360) || \
+      defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE))
+
+static int __init unregister_early_console(void)
+{
+	if (!early_console || MACH_IS_MVME16x)
+		return 0;
+
+	return unregister_console(early_console);
+}
+late_initcall(unregister_early_console);
+
+#endif

arch/m68k/kernel/head.S

@@ -153,7 +153,7 @@
  * ------------
  *	The console is also able to be turned off.  The console in head.S
  * is specifically for debugging and can be very useful.  It is surrounded by
- * #ifdef CONSOLE/#endif clauses so it doesn't have to ship in known-good
+ * #ifdef / #endif clauses so it doesn't have to ship in known-good
  * kernels.  It's basic algorithm is to determine the size of the screen
  * (in height/width and bit depth) and then use that information for
  * displaying an 8x8 font or an 8x16 (widthxheight).  I prefer the 8x8 for
@@ -198,9 +198,8 @@
  * CONFIG_xxx:	These are the obvious machine configuration defines created
  * during configuration.  These are defined in autoconf.h.
  *
- * CONSOLE:	There is support for head.S console in this file.  This
- * console can talk to a Mac frame buffer, but could easily be extrapolated
- * to extend it to support other platforms.
+ * CONSOLE_DEBUG:  Only supports a Mac frame buffer but could easily be
+ * extended to support other platforms.
  *
  * TEST_MMU:	This is a test harness for running on any given machine but
  * getting an MMU dump for another class of machine.  The classes of machines
@@ -222,7 +221,7 @@
  * MMU_PRINT:	There is a routine built into head.S that can display the
  * MMU data structures.  It outputs its result through the serial_putc
  * interface.  So where ever that winds up driving data, that's where the
- * mmu struct will appear.  On the Macintosh that's typically the console.
+ * mmu struct will appear.
  *
  * SERIAL_DEBUG:	There are a series of putc() macro statements
  * scattered through out the code to give progress of status to the
@@ -250,8 +249,8 @@
  * USE_MFP:	Use the ST-MFP port (Modem1) for serial debug.
  *
  * Macintosh constants:
- * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console.
- * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console.
+ * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug.
+ * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug.
  */
 
 #include <linux/linkage.h>
@@ -268,27 +267,17 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/asm-offsets.h>
-
 #ifdef CONFIG_MAC
-
-#include <asm/machw.h>
-
-#ifdef CONFIG_FRAMEBUFFER_CONSOLE
-#define CONSOLE
+#  include <asm/machw.h>
 #endif
 
 #ifdef CONFIG_EARLY_PRINTK
-#define SERIAL_DEBUG
-#else
-#undef SERIAL_DEBUG
+#  define SERIAL_DEBUG
+#  if defined(CONFIG_MAC) && defined(CONFIG_FONT_SUPPORT)
+#    define CONSOLE_DEBUG
+#  endif
 #endif
 
-#else /* !CONFIG_MAC */
-
-#define SERIAL_DEBUG
-
-#endif /* !CONFIG_MAC */
-
 #undef MMU_PRINT
 #undef MMU_NOCACHE_KERNEL
 #undef DEBUG
@@ -303,6 +292,7 @@
 
 .globl kernel_pg_dir
 .globl availmem
+.globl m68k_init_mapped_size
 .globl m68k_pgtable_cachemode
 .globl m68k_supervisor_cachemode
 #ifdef CONFIG_MVME16x
@@ -480,22 +470,21 @@ func_define	serial_putc,1
 func_define	console_putc,1
 
 func_define	console_init
-func_define	console_put_stats
 func_define	console_put_penguin
 func_define	console_plot_pixel,3
 func_define	console_scroll
 
 .macro	putc	ch
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
 	pea	\ch
 #endif
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 	func_call	console_putc
 #endif
 #ifdef SERIAL_DEBUG
 	func_call	serial_putc
 #endif
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
 	addql	#4,%sp
 #endif
 .endm
@@ -515,7 +504,7 @@ func_define	putn,1
 .endm
 
 .macro	puts		string
-#if defined(CONSOLE) || defined(SERIAL_DEBUG)
+#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG)
 	__INITDATA
 .Lstr\@:
 	.string	"\string"
@@ -651,11 +640,9 @@ ENTRY(__start)
 	lea	%pc@(L(mac_rowbytes)),%a1
 	movel	%a0@,%a1@
 
-#ifdef SERIAL_DEBUG
 	get_bi_record	BI_MAC_SCCBASE
 	lea	%pc@(L(mac_sccbase)),%a1
 	movel	%a0@,%a1@
-#endif
 
 L(test_notmac):
 #endif /* CONFIG_MAC */
@@ -885,13 +872,12 @@ L(nothp):
  */
 #ifdef CONFIG_MAC
 	is_not_mac(L(nocon))
-#  ifdef CONSOLE
+#  ifdef CONSOLE_DEBUG
 	console_init
 #    ifdef CONFIG_LOGO
 	console_put_penguin
 #    endif /* CONFIG_LOGO */
-	console_put_stats
-#  endif /* CONSOLE */
+#  endif /* CONSOLE_DEBUG */
 L(nocon):
 #endif /* CONFIG_MAC */
 
@@ -922,10 +908,21 @@ L(nocon):
  *
  *	This block of code does what's necessary to map in the various kinds
  *	of machines for execution of Linux.
- *	First map the first 4 MB of kernel code & data
+ *	First map the first 4, 8, or 16 MB of kernel code & data
  */
 
-	mmu_map	#PAGE_OFFSET,%pc@(L(phys_kernel_start)),#4*1024*1024,\
+	get_bi_record BI_MEMCHUNK
+	movel	%a0@(4),%d0
+	movel	#16*1024*1024,%d1
+	cmpl	%d0,%d1
+	jls	1f
+	lsrl	#1,%d1
+	cmpl	%d0,%d1
+	jls	1f
+	lsrl	#1,%d1
+1:
+	movel	%d1,m68k_init_mapped_size
+	mmu_map	#PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\
 		%pc@(m68k_supervisor_cachemode)
 
 	putc	'C'
@@ -1396,15 +1393,13 @@ L(mmu_fixup_done):
 	andl	L(mac_videobase),%d0
 	addl	#VIDEOMEMBASE,%d0
 	movel	%d0,L(mac_videobase)
-#if defined(CONSOLE)
+#ifdef CONSOLE_DEBUG
 	movel	%pc@(L(phys_kernel_start)),%d0
 	subl	#PAGE_OFFSET,%d0
 	subl	%d0,L(console_font)
 	subl	%d0,L(console_font_data)
 #endif
-#ifdef SERIAL_DEBUG
 	orl	#0x50000000,L(mac_sccbase)
-#endif
 1:
 #endif
 
@@ -2734,7 +2729,12 @@ func_return	get_new_page
  */
 
 #ifdef CONFIG_MAC
+/* You may define either or both of these. */
+#define MAC_USE_SCC_A /* Modem port */
+#define MAC_USE_SCC_B /* Printer port */
 
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
+/* Initialisation table for SCC with 3.6864 MHz PCLK */
 L(scc_initable_mac):
 	.byte	4,0x44		/* x16, 1 stopbit, no parity */
 	.byte	3,0xc0		/* receiver: 8 bpc */
@@ -2748,6 +2748,7 @@ L(scc_initable_mac):
 	.byte	-1
 	.even
 #endif
+#endif /* CONFIG_MAC */
 
 #ifdef CONFIG_ATARI
 /* #define USE_PRINTER */
@@ -2756,14 +2757,12 @@ L(scc_initable_mac):
 #define USE_MFP
 
 #if defined(USE_SCC_A) || defined(USE_SCC_B)
-#define USE_SCC
-/* Initialisation table for SCC */
-L(scc_initable):
-	.byte	9,12		/* Reset */
+/* Initialisation table for SCC with 7.9872 MHz PCLK */
+/* PCLK == 8.0539 gives baud == 9680.1 */
+L(scc_initable_atari):
 	.byte	4,0x44		/* x16, 1 stopbit, no parity */
 	.byte	3,0xc0		/* receiver: 8 bpc */
 	.byte	5,0xe2		/* transmitter: 8 bpc, assert dtr/rts */
-	.byte	9,0		/* no interrupts */
 	.byte	10,0		/* NRZ */
 	.byte	11,0x50		/* use baud rate generator */
 	.byte	12,24,13,0	/* 9600 baud */
@@ -2812,7 +2811,7 @@ LMFP_UDR     = 0xfffa2f
  */
 
 /*
- * Initialize serial port hardware for 9600/8/1
+ * Initialize serial port hardware
  */
 func_start	serial_init,%d0/%d1/%a0/%a1
 	/*
@@ -2822,7 +2821,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	 *		d0 = boot info offset
 	 *	CONFIG_ATARI
 	 *		a0 = address of SCC
-	 *		a1 = Liobase address/address of scc_initable
+	 *		a1 = Liobase address/address of scc_initable_atari
 	 *		d0 = init data for serial port
 	 *	CONFIG_MAC
 	 *		a0 = address of SCC
@@ -2843,6 +2842,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 |	movew	#61,CUSTOMBASE+C_SERPER-ZTWOBASE
 1:
 #endif
+
 #ifdef CONFIG_ATARI
 	is_not_atari(4f)
 	movel	%pc@(L(iobase)),%a1
@@ -2857,9 +2857,21 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	moveb	%a1@(LPSG_READ),%d0
 	bset	#5,%d0
 	moveb	%d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
+#elif defined(USE_SCC_A) || defined(USE_SCC_B)
 	lea	%a1@(LSCC_CTRL),%a0
-	lea	%pc@(L(scc_initable)),%a1
+	/* Reset SCC register pointer */
+	moveb	%a0@,%d0
+	/* Reset SCC device: write register pointer then register value */
+	moveb	#9,%a0@
+	moveb	#0xc0,%a0@
+	/* Wait for 5 PCLK cycles, which is about 63 CPU cycles */
+	/* 5 / 7.9872 MHz = approx. 0.63 us = 63 / 100 MHz */
+	movel	#32,%d0
+2:
+	subq	#1,%d0
+	jne	2b
+	/* Initialize channel */
+	lea	%pc@(L(scc_initable_atari)),%a1
 2:	moveb	%a1@+,%d0
 	jmi	3f
 	moveb	%d0,%a0@
@@ -2877,21 +2889,14 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	L(serial_init_done)
 4:
 #endif
+
 #ifdef CONFIG_MAC
 	is_not_mac(L(serial_init_not_mac))
-
-#ifdef SERIAL_DEBUG
-
-/* You may define either or both of these. */
-#define MAC_USE_SCC_A /* Modem port */
-#define MAC_USE_SCC_B /* Printer port */
-
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
 #define mac_scc_cha_b_ctrl_offset	0x0
 #define mac_scc_cha_a_ctrl_offset	0x2
 #define mac_scc_cha_b_data_offset	0x4
 #define mac_scc_cha_a_data_offset	0x6
-
-#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
 	movel	%pc@(L(mac_sccbase)),%a0
 	/* Reset SCC register pointer */
 	moveb	%a0@(mac_scc_cha_a_ctrl_offset),%d0
@@ -2905,7 +2910,6 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	subq	#1,%d0
 	jne	5b
 #endif
-
 #ifdef MAC_USE_SCC_A
 	/* Initialize channel A */
 	lea	%pc@(L(scc_initable_mac)),%a1
@@ -2916,7 +2920,6 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	5b
 6:
 #endif	/* MAC_USE_SCC_A */
-
 #ifdef MAC_USE_SCC_B
 	/* Initialize channel B */
 	lea	%pc@(L(scc_initable_mac)),%a1
@@ -2927,9 +2930,6 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	7b
 8:
 #endif	/* MAC_USE_SCC_B */
-
-#endif	/* SERIAL_DEBUG */
-
 	jra	L(serial_init_done)
 L(serial_init_not_mac):
 #endif	/* CONFIG_MAC */
@@ -2959,6 +2959,15 @@ L(serial_init_not_mac):
 2:
 #endif
 
+#ifdef CONFIG_MVME16x
+	is_not_mvme16x(L(serial_init_not_mvme16x))
+	moveb	#0x10,M167_PCSCCMICR
+	moveb	#0x10,M167_PCSCCTICR
+	moveb	#0x10,M167_PCSCCRICR
+	jra	L(serial_init_done)
+L(serial_init_not_mvme16x):
+#endif
+
 #ifdef CONFIG_APOLLO
 /* We count on the PROM initializing SIO1 */
 #endif
@@ -2998,27 +3007,19 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 
 #ifdef CONFIG_MAC
 	is_not_mac(5f)
-
-#ifdef SERIAL_DEBUG
-
 #if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
 	movel	%pc@(L(mac_sccbase)),%a1
 #endif
-
 #ifdef MAC_USE_SCC_A
 3:	btst	#2,%a1@(mac_scc_cha_a_ctrl_offset)
 	jeq	3b
 	moveb	%d0,%a1@(mac_scc_cha_a_data_offset)
 #endif	/* MAC_USE_SCC_A */
-
 #ifdef MAC_USE_SCC_B
 4:	btst	#2,%a1@(mac_scc_cha_b_ctrl_offset)
 	jeq	4b
 	moveb	%d0,%a1@(mac_scc_cha_b_data_offset)
 #endif	/* MAC_USE_SCC_B */
-
-#endif	/* SERIAL_DEBUG */
-
 	jra	L(serial_putc_done)
 5:
 #endif	/* CONFIG_MAC */
@@ -3039,7 +3040,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 	nop
 	bset	#5,%d0
 	moveb	%d0,%a1@(LPSG_WRITE)
-#elif defined(USE_SCC)
+#elif defined(USE_SCC_A) || defined(USE_SCC_B)
 3:	btst	#2,%a1@(LSCC_CTRL)
 	jeq	3b
 	moveb	%d0,%a1@(LSCC_DATA)
@@ -3195,7 +3196,7 @@ func_start	puts,%d0/%a0
 	movel	ARG1,%a0
 	jra	2f
 1:
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 	console_putc	%d0
 #endif
 #ifdef SERIAL_DEBUG
@@ -3224,7 +3225,7 @@ func_start	putn,%d0-%d2
 	jls	2f
 	addb	#'A'-('9'+1),%d2
 2:
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 	console_putc	%d2
 #endif
 #ifdef SERIAL_DEBUG
@@ -3234,21 +3235,19 @@ func_start	putn,%d0-%d2
 
 func_return	putn
 
-#ifdef CONFIG_MAC
+#ifdef CONFIG_EARLY_PRINTK
 /*
- *	mac_early_print
- *
  *	This routine takes its parameters on the stack.  It then
  *	turns around and calls the internal routines.  This routine
  *	is used by the boot console.
  *
  *	The calling parameters are:
- *		void mac_early_print(const char *str, unsigned length);
+ *		void debug_cons_nputs(const char *str, unsigned length)
  *
  *	This routine does NOT understand variable arguments only
  *	simple strings!
  */
-ENTRY(mac_early_print)
+ENTRY(debug_cons_nputs)
 	moveml	%d0/%d1/%a0,%sp@-
 	movew	%sr,%sp@-
 	ori	#0x0700,%sr
@@ -3256,7 +3255,7 @@ ENTRY(mac_early_print)
 	movel	%sp@(22),%d1		/* fetch parameter */
 	jra	2f
 1:
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 	console_putc	%d0
 #endif
 #ifdef SERIAL_DEBUG
@@ -3270,7 +3269,7 @@ ENTRY(mac_early_print)
 	movew	%sp@+,%sr
 	moveml	%sp@+,%d0/%d1/%a0
 	rts
-#endif /* CONFIG_MAC */
+#endif /* CONFIG_EARLY_PRINTK */
 
 #if defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
 func_start	set_leds,%d0/%a0
@@ -3292,7 +3291,7 @@ func_start	set_leds,%d0/%a0
 func_return	set_leds
 #endif
 
-#ifdef CONSOLE
+#ifdef CONSOLE_DEBUG
 /*
  *	For continuity, see the data alignment
  *	to which this structure is tied.
@@ -3396,43 +3395,6 @@ L(console_clear_loop):
 1:
 func_return	console_init
 
-func_start	console_put_stats,%a0/%d7
-	/*
-	 *	Some of the register usage that follows
-	 *		a0 = pointer to boot_info
-	 *		d7 = value of boot_info fields
-	 */
-	puts	"\nMacLinux\n"
-
-#ifdef SERIAL_DEBUG
-	puts	"\n vidaddr:"
-	putn	%pc@(L(mac_videobase))		/* video addr. */
-
-	puts	"\n  _stext:"
-	lea	%pc@(_stext),%a0
-	putn	%a0
-
-	puts	"\nbootinfo:"
-	lea	%pc@(_end),%a0
-	putn	%a0
-
-	puts	"\n   cpuid:"
-	putn	%pc@(L(cputype))
-
-#  ifdef CONFIG_MAC
-	puts	"\n sccbase:"
-	putn	%pc@(L(mac_sccbase))
-#  endif
-#  ifdef MMU_PRINT
-	putc	'\n'
-	jbsr	mmu_print_machine_cpu_types
-#  endif
-#endif /* SERIAL_DEBUG */
-
-	putc	'\n'
-
-func_return	console_put_stats
-
 #ifdef CONFIG_LOGO
 func_start	console_put_penguin,%a0-%a1/%d0-%d7
 	/*
@@ -3774,12 +3736,15 @@ L(white_16):
 
 L(console_plot_pixel_exit):
 func_return	console_plot_pixel
-#endif /* CONSOLE */
+#endif /* CONSOLE_DEBUG */
 
 
 __INITDATA
 	.align	4
 
+m68k_init_mapped_size:
+	.long	0
+
 #if defined(CONFIG_ATARI) || defined(CONFIG_AMIGA) || \
     defined(CONFIG_HP300) || defined(CONFIG_APOLLO)
 L(custom):
@@ -3787,7 +3752,7 @@ L(iobase):
 	.long 0
 #endif
 
-#if defined(CONSOLE)
+#ifdef CONSOLE_DEBUG
 L(console_globals):
 	.long	0		/* cursor column */
 	.long	0		/* cursor row */
@@ -3798,7 +3763,7 @@ L(console_font):
 	.long	0		/* pointer to console font (struct font_desc) */
 L(console_font_data):
 	.long	0		/* pointer to console font data */
-#endif /* CONSOLE */
+#endif /* CONSOLE_DEBUG */
 
 #if defined(MMU_PRINT)
 L(mmu_print_data):
@@ -3838,7 +3803,9 @@ M167_CYIER = 0xfff45011
 M167_CYLICR = 0xfff45026
 M167_CYTEOIR = 0xfff45085
 M167_CYTDR = 0xfff450f8
+M167_PCSCCMICR = 0xfff4201d
 M167_PCSCCTICR = 0xfff4201e
+M167_PCSCCRICR = 0xfff4201f
 M167_PCTPIACKR = 0xfff42025
 #endif
 
@@ -3856,10 +3823,8 @@ L(mac_dimensions):
 	.long	0
 L(mac_rowbytes):
 	.long	0
-#ifdef SERIAL_DEBUG
 L(mac_sccbase):
 	.long	0
-#endif
 #endif /* CONFIG_MAC */
 
 #if defined (CONFIG_APOLLO)

arch/m68k/mac/config.c

@@ -71,31 +71,6 @@ static void mac_get_model(char *str);
 static void mac_identify(void);
 static void mac_report_hardware(void);
 
-#ifdef CONFIG_EARLY_PRINTK
-asmlinkage void __init mac_early_print(const char *s, unsigned n);
-
-static void __init mac_early_cons_write(struct console *con,
-                                 const char *s, unsigned n)
-{
-	mac_early_print(s, n);
-}
-
-static struct console __initdata mac_early_cons = {
-	.name  = "early",
-	.write = mac_early_cons_write,
-	.flags = CON_PRINTBUFFER | CON_BOOT,
-	.index = -1
-};
-
-int __init mac_unregister_early_cons(void)
-{
-	/* mac_early_print can't be used after init sections are discarded */
-	return unregister_console(&mac_early_cons);
-}
-
-late_initcall(mac_unregister_early_cons);
-#endif
-
 static void __init mac_sched_init(irq_handler_t vector)
 {
 	via_init_clock(vector);
@@ -190,10 +165,6 @@ void __init config_mac(void)
 	mach_beep = mac_mksound;
 #endif
 
-#ifdef CONFIG_EARLY_PRINTK
-	register_console(&mac_early_cons);
-#endif
-
 	/*
 	 * Determine hardware present
 	 */

arch/m68k/mm/motorola.c

@@ -45,7 +45,7 @@ EXPORT_SYMBOL(mm_cachebits);
 #endif
 
 /* size of memory already mapped in head.S */
-#define INIT_MAPPED_SIZE	(4UL<<20)
+extern __initdata unsigned long m68k_init_mapped_size;
 
 extern unsigned long availmem;
 
@@ -271,10 +271,12 @@ void __init paging_init(void)
 	 */
 	addr = m68k_memory[0].addr;
 	size = m68k_memory[0].size;
-	free_bootmem_node(NODE_DATA(0), availmem, min(INIT_MAPPED_SIZE, size) - (availmem - addr));
+	free_bootmem_node(NODE_DATA(0), availmem,
+			  min(m68k_init_mapped_size, size) - (availmem - addr));
 	map_node(0);
-	if (size > INIT_MAPPED_SIZE)
-		free_bootmem_node(NODE_DATA(0), addr + INIT_MAPPED_SIZE, size - INIT_MAPPED_SIZE);
+	if (size > m68k_init_mapped_size)
+		free_bootmem_node(NODE_DATA(0), addr + m68k_init_mapped_size,
+				  size - m68k_init_mapped_size);
 
 	for (i = 1; i < m68k_num_memory; i++)
 		map_node(i);

arch/m68k/mvme16x/config.c

@@ -213,7 +213,7 @@ static void __init mvme16x_init_IRQ (void)
 #define CySCRH		(0x22)
 #define CyTFTC		(0x80)
 
-static void cons_write(struct console *co, const char *str, unsigned count)
+void mvme16x_cons_write(struct console *co, const char *str, unsigned count)
 {
 	volatile unsigned char *base_addr = (u_char *)CD2401_ADDR;
 	volatile u_char sink;
@@ -268,20 +268,6 @@ static void cons_write(struct console *co, const char *str, unsigned count)
 	base_addr[CyIER] = ier;
 }
 
-static struct console cons_info =
-{
-	.name	= "sercon",
-	.write	= cons_write,
-	.flags	= CON_PRINTBUFFER | CON_BOOT,
-	.index	= -1,
-};
-
-static void __init mvme16x_early_console(void)
-{
-	register_console(&cons_info);
-
-	printk(KERN_INFO "MVME16x: early console registered\n");
-}
 #endif
 
 void __init config_mvme16x(void)
@@ -336,16 +322,6 @@ void __init config_mvme16x(void)
     else
     {
 	mvme16x_config = MVME16x_CONFIG_GOT_LP | MVME16x_CONFIG_GOT_CD2401;
-
-	/* Dont allow any interrupts from the CD2401 until the interrupt */
-	/* handlers are installed					 */
-
-	pcc2chip[PccSCCMICR] = 0x10;
-	pcc2chip[PccSCCTICR] = 0x10;
-	pcc2chip[PccSCCRICR] = 0x10;
-#ifdef CONFIG_EARLY_PRINTK
-	mvme16x_early_console();
-#endif
     }
 }
 

drivers/block/ataflop.c

@@ -1952,7 +1952,7 @@ static int __init atari_floppy_init (void)
 		goto Enomem;
 	}
 	TrackBuffer = DMABuffer + 512;
-	PhysDMABuffer = virt_to_phys(DMABuffer);
+	PhysDMABuffer = atari_stram_to_phys(DMABuffer);
 	PhysTrackBuffer = virt_to_phys(TrackBuffer);
 	BufferDrive = BufferSide = BufferTrack = -1;
 

drivers/scsi/atari_scsi.c

@@ -639,7 +639,7 @@ static int __init atari_scsi_detect(struct scsi_host_template *host)
 					"double buffer\n");
 			return 0;
 		}
-		atari_dma_phys_buffer = virt_to_phys(atari_dma_buffer);
+		atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer);
 		atari_dma_orig_addr = 0;
 	}
 #endif

drivers/video/fbdev/atafb.c

@@ -191,7 +191,7 @@ static struct fb_info fb_info = {
 };
 
 static void *screen_base;	/* base address of screen */
-static void *real_screen_base;	/* (only for Overscan) */
+static unsigned long phys_screen_base;	/* (only for Overscan) */
 
 static int screen_len;
 
@@ -213,7 +213,8 @@ static unsigned int external_yres;
  */
 static unsigned int external_depth;
 static int external_pmode;
-static void *external_addr;
+static void *external_screen_base;
+static unsigned long external_addr;
 static unsigned long external_len;
 static unsigned long external_vgaiobase;
 static unsigned int external_bitspercol = 6;
@@ -592,7 +593,7 @@ static int tt_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
 	int mode;
 
 	strcpy(fix->id, "Atari Builtin");
-	fix->smem_start = (unsigned long)real_screen_base;
+	fix->smem_start = phys_screen_base;
 	fix->smem_len = screen_len;
 	fix->type = FB_TYPE_INTERLEAVED_PLANES;
 	fix->type_aux = 2;
@@ -790,7 +791,7 @@ static void tt_get_par(struct atafb_par *par)
 	addr = ((shifter.bas_hi & 0xff) << 16) |
 	       ((shifter.bas_md & 0xff) << 8)  |
 	       ((shifter.bas_lo & 0xff));
-	par->screen_base = phys_to_virt(addr);
+	par->screen_base = atari_stram_to_virt(addr);
 }
 
 static void tt_set_par(struct atafb_par *par)
@@ -888,7 +889,7 @@ static int falcon_encode_fix(struct fb_fix_screeninfo *fix,
 			     struct atafb_par *par)
 {
 	strcpy(fix->id, "Atari Builtin");
-	fix->smem_start = (unsigned long)real_screen_base;
+	fix->smem_start = phys_screen_base;
 	fix->smem_len = screen_len;
 	fix->type = FB_TYPE_INTERLEAVED_PLANES;
 	fix->type_aux = 2;
@@ -1584,7 +1585,7 @@ static void falcon_get_par(struct atafb_par *par)
 	addr = (shifter.bas_hi & 0xff) << 16 |
 	       (shifter.bas_md & 0xff) << 8  |
 	       (shifter.bas_lo & 0xff);
-	par->screen_base = phys_to_virt(addr);
+	par->screen_base = atari_stram_to_virt(addr);
 
 	/* derived parameters */
 	hw->ste_mode = (hw->f_shift & 0x510) == 0 && hw->st_shift == 0x100;
@@ -1814,7 +1815,7 @@ static int stste_encode_fix(struct fb_fix_screeninfo *fix,
 	int mode;
 
 	strcpy(fix->id, "Atari Builtin");
-	fix->smem_start = (unsigned long)real_screen_base;
+	fix->smem_start = phys_screen_base;
 	fix->smem_len = screen_len;
 	fix->type = FB_TYPE_INTERLEAVED_PLANES;
 	fix->type_aux = 2;
@@ -1980,7 +1981,7 @@ static void stste_get_par(struct atafb_par *par)
 	       ((shifter.bas_md & 0xff) << 8);
 	if (ATARIHW_PRESENT(EXTD_SHIFTER))
 		addr |= (shifter.bas_lo & 0xff);
-	par->screen_base = phys_to_virt(addr);
+	par->screen_base = atari_stram_to_virt(addr);
 }
 
 static void stste_set_par(struct atafb_par *par)
@@ -2039,7 +2040,7 @@ static int stste_detect(void)
 static void stste_set_screen_base(void *s_base)
 {
 	unsigned long addr;
-	addr = virt_to_phys(s_base);
+	addr = atari_stram_to_phys(s_base);
 	/* Setup Screen Memory */
 	shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
 	shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
@@ -2113,7 +2114,7 @@ static void st_ovsc_switch(void)
 static int ext_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
 {
 	strcpy(fix->id, "Unknown Extern");
-	fix->smem_start = (unsigned long)external_addr;
+	fix->smem_start = external_addr;
 	fix->smem_len = PAGE_ALIGN(external_len);
 	if (external_depth == 1) {
 		fix->type = FB_TYPE_PACKED_PIXELS;
@@ -2213,7 +2214,7 @@ static int ext_encode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
 
 static void ext_get_par(struct atafb_par *par)
 {
-	par->screen_base = external_addr;
+	par->screen_base = external_screen_base;
 }
 
 static void ext_set_par(struct atafb_par *par)
@@ -2286,7 +2287,7 @@ static void set_screen_base(void *s_base)
 {
 	unsigned long addr;
 
-	addr = virt_to_phys(s_base);
+	addr = atari_stram_to_phys(s_base);
 	/* Setup Screen Memory */
 	shifter.bas_hi = (unsigned char)((addr & 0xff0000) >> 16);
 	shifter.bas_md = (unsigned char)((addr & 0x00ff00) >> 8);
@@ -2433,7 +2434,9 @@ static void atafb_set_disp(struct fb_info *info)
 	atafb_get_var(&info->var, info);
 	atafb_get_fix(&info->fix, info);
 
-	info->screen_base = (void *)info->fix.smem_start;
+	/* Note: smem_start derives from phys_screen_base, not screen_base! */
+	info->screen_base = (external_addr ? external_screen_base :
+				atari_stram_to_virt(info->fix.smem_start));
 }
 
 static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
@@ -2904,7 +2907,7 @@ static void __init atafb_setup_ext(char *spec)
 	external_yres = yres;
 	external_depth = depth;
 	external_pmode = planes;
-	external_addr = (void *)addr;
+	external_addr = addr;
 	external_len = len;
 
 	if (external_card_type == IS_MV300) {
@@ -3166,30 +3169,30 @@ int __init atafb_init(void)
 		memset(screen_base, 0, mem_req);
 		pad = -(unsigned long)screen_base & (PAGE_SIZE - 1);
 		screen_base += pad;
-		real_screen_base = screen_base + ovsc_offset;
+		phys_screen_base = atari_stram_to_phys(screen_base + ovsc_offset);
 		screen_len = (mem_req - pad - ovsc_offset) & PAGE_MASK;
 		st_ovsc_switch();
 		if (CPU_IS_040_OR_060) {
 			/* On a '040+, the cache mode of video RAM must be set to
 			 * write-through also for internal video hardware! */
-			cache_push(virt_to_phys(screen_base), screen_len);
+			cache_push(atari_stram_to_phys(screen_base), screen_len);
 			kernel_set_cachemode(screen_base, screen_len,
 					     IOMAP_WRITETHROUGH);
 		}
-		printk("atafb: screen_base %p real_screen_base %p screen_len %d\n",
-			screen_base, real_screen_base, screen_len);
+		printk("atafb: screen_base %p phys_screen_base %lx screen_len %d\n",
+			screen_base, phys_screen_base, screen_len);
 #ifdef ATAFB_EXT
 	} else {
 		/* Map the video memory (physical address given) to somewhere
 		 * in the kernel address space.
 		 */
-		external_addr = ioremap_writethrough((unsigned long)external_addr,
+		external_screen_base = ioremap_writethrough(external_addr,
 						     external_len);
 		if (external_vgaiobase)
 			external_vgaiobase =
 			  (unsigned long)ioremap(external_vgaiobase, 0x10000);
-		screen_base =
-		real_screen_base = external_addr;
+		screen_base = external_screen_base;
+		phys_screen_base = external_addr;
 		screen_len = external_len & PAGE_MASK;
 		memset (screen_base, 0, external_len);
 	}
@@ -3235,8 +3238,8 @@ int __init atafb_init(void)
 	if (register_framebuffer(&fb_info) < 0) {
 #ifdef ATAFB_EXT
 		if (external_addr) {
-			iounmap(external_addr);
-			external_addr = NULL;
+			iounmap(external_screen_base);
+			external_addr = 0;
 		}
 		if (external_vgaiobase) {
 			iounmap((void*)external_vgaiobase);