cxgb3: minor aq100x phy fixes

Use generic MDIO generic values.
Based on Ben Hutchings'review comments.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/cxgb3/aq100x.c

@@ -43,8 +43,6 @@ enum {
 	AQ_XAUI_TX_CFG	= 0xe400,
 
 	/* MDIO_DEV_ANEG registers */
-	AQ_100M_CTRL	= 0x0010,
-	AQ_10G_CTRL	= 0x0020,
 	AQ_1G_CTRL	= 0xc400,
 	AQ_ANEG_STAT	= 0xc800,
 
@@ -54,14 +52,15 @@ enum {
 	AQ_IMASK_GLOBAL	= 0xff00,
 };
 
-#define AQBIT(x)	(1 << (x))
-#define IMASK_PMA	AQBIT(0x2)
-#define IMASK_GLOBAL	AQBIT(0xf)
-#define ADV_1G_FULL	AQBIT(0xf)
-#define ADV_1G_HALF	AQBIT(0xe)
-#define ADV_10G_FULL	AQBIT(0xc)
-#define AQ_RESET	(AQBIT(0xe) | AQBIT(0xf))
-#define AQ_LOWPOWER	AQBIT(0xb)
+enum {
+	IMASK_PMA	= 1 << 2,
+	IMASK_GLOBAL	= 1 << 15,
+	ADV_1G_FULL	= 1 << 15,
+	ADV_1G_HALF	= 1 << 14,
+	ADV_10G_FULL	= 1 << 12,
+	AQ_RESET	= (1 << 14) | (1 << 15),
+	AQ_LOWPOWER	= 1 << 12,
+};
 
 static int aq100x_reset(struct cphy *phy, int wait)
 {
@@ -160,7 +159,7 @@ static int aq100x_advertise(struct cphy *phy, unsigned int advertise_map)
 	adv = 0;
 	if (advertise_map & ADVERTISED_10000baseT_Full)
 		adv |= ADV_10G_FULL;
-	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_10G_CTRL,
+	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
 				  ADV_10G_FULL, adv);
 	if (err)
 		return err;
@@ -186,7 +185,8 @@ static int aq100x_advertise(struct cphy *phy, unsigned int advertise_map)
 		adv |= ADVERTISE_PAUSE_CAP;
 	if (advertise_map & ADVERTISED_Asym_Pause)
 		adv |= ADVERTISE_PAUSE_ASYM;
-	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_100M_CTRL, 0xfe0, adv);
+	err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
+				  0xfe0, adv);
 
 	return err;
 }