[SCSI] sd: Use SCSI read/write(16) with > 32-bit LBA drives

Force large capacity (> 0xFFFFFFFF blocks) drives to use READ/WRITE(16) instead
of READ/WRITE(10). Some(most/all?) USB enclosures do not like READ(10) commands
when a large capacity drive is installed. This issue was reported and discussed
here: http://marc.info/?l=linux-usb&m=135247705222324Signed-off-by: NJason J. Herne <hernejj@gmail.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/sd.c

@@ -1011,7 +1011,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 		SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
 		SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
 		SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
-	} else if (block > 0xffffffff) {
+	} else if (sdp->use_16_for_rw) {
 		SCpnt->cmnd[0] += READ_16 - READ_6;
 		SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
 		SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
@@ -2203,6 +2203,8 @@ sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
 		}
 	}
 
+	sdp->use_16_for_rw = (sdkp->capacity > 0xffffffff);
+
 	/* Rescale capacity to 512-byte units */
 	if (sector_size == 4096)
 		sdkp->capacity <<= 3;

include/scsi/scsi_device.h

@@ -137,6 +137,7 @@ struct scsi_device {
 	unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
 	unsigned no_report_opcodes:1;	/* no REPORT SUPPORTED OPERATION CODES */
 	unsigned no_write_same:1;	/* no WRITE SAME command */
+	unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
 	unsigned skip_ms_page_8:1;	/* do not use MODE SENSE page 0x08 */
 	unsigned skip_ms_page_3f:1;	/* do not use MODE SENSE page 0x3f */
 	unsigned skip_vpd_pages:1;	/* do not read VPD pages */