提交 5036fe0f 编写于 作者: R Rajkumar Manoharan 提交者: Kalle Valo

ath10k: reload HT/VHT capabilities on antenna change

To reflect configured antenna settings in HT/VHT MCS map,
reload the HT/VHT capabilities upon antenna change.
Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
上级 f58512f3
......@@ -3897,6 +3897,29 @@ static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
return ht_cap;
}
static void ath10k_mac_setup_ht_vht_cap(struct ath10k *ar)
{
struct ieee80211_supported_band *band;
struct ieee80211_sta_vht_cap vht_cap;
struct ieee80211_sta_ht_cap ht_cap;
ht_cap = ath10k_get_ht_cap(ar);
vht_cap = ath10k_create_vht_cap(ar);
if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
band = &ar->mac.sbands[IEEE80211_BAND_2GHZ];
band->ht_cap = ht_cap;
/* Enable the VHT support at 2.4 GHz */
band->vht_cap = vht_cap;
}
if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
band = &ar->mac.sbands[IEEE80211_BAND_5GHZ];
band->ht_cap = ht_cap;
band->vht_cap = vht_cap;
}
}
static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
{
int ret;
......@@ -3929,6 +3952,9 @@ static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant)
return ret;
}
/* Reload HT/VHT capability */
ath10k_mac_setup_ht_vht_cap(ar);
return 0;
}
......@@ -7102,8 +7128,6 @@ int ath10k_mac_register(struct ath10k *ar)
WLAN_CIPHER_SUITE_AES_CMAC,
};
struct ieee80211_supported_band *band;
struct ieee80211_sta_vht_cap vht_cap;
struct ieee80211_sta_ht_cap ht_cap;
void *channels;
int ret;
......@@ -7111,9 +7135,6 @@ int ath10k_mac_register(struct ath10k *ar)
SET_IEEE80211_DEV(ar->hw, ar->dev);
ht_cap = ath10k_get_ht_cap(ar);
vht_cap = ath10k_create_vht_cap(ar);
BUILD_BUG_ON((ARRAY_SIZE(ath10k_2ghz_channels) +
ARRAY_SIZE(ath10k_5ghz_channels)) !=
ATH10K_NUM_CHANS);
......@@ -7132,10 +7153,6 @@ int ath10k_mac_register(struct ath10k *ar)
band->channels = channels;
band->n_bitrates = ath10k_g_rates_size;
band->bitrates = ath10k_g_rates;
band->ht_cap = ht_cap;
/* Enable the VHT support at 2.4 GHz */
band->vht_cap = vht_cap;
ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
}
......@@ -7154,11 +7171,11 @@ int ath10k_mac_register(struct ath10k *ar)
band->channels = channels;
band->n_bitrates = ath10k_a_rates_size;
band->bitrates = ath10k_a_rates;
band->ht_cap = ht_cap;
band->vht_cap = vht_cap;
ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
}
ath10k_mac_setup_ht_vht_cap(ar);
ar->hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP) |
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册