提交 4cb36310 编写于 作者: D David Henningsson 提交者: Takashi Iwai

ALSA: HDA: Add position_fix=3 module option, and refactor related code

What was previously known as via_dmapos_patch, and hard-coded to be
used for VIA and ATI controllers, is now configurable through a module
option. The background is that some VIA controllers seem to prefer
via_dmapos_patch to be turned off.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 c123e5e4
......@@ -57,9 +57,11 @@ dead. However, this detection isn't perfect on some devices. In such
a case, you can change the default method via `position_fix` option.
`position_fix=1` means to use LPIB method explicitly.
`position_fix=2` means to use the position-buffer. 0 is the default
value, the automatic check and fallback to LPIB as described in the
above. If you get a problem of repeated sounds, this option might
`position_fix=2` means to use the position-buffer.
`position_fix=3` means to use a combination of both methods, needed
for some VIA and ATI controllers. 0 is the default value for all other
controllers, the automatic check and fallback to LPIB as described in
the above. If you get a problem of repeated sounds, this option might
help.
In addition to that, every controller is known to be broken regarding
......
......@@ -78,8 +78,8 @@ MODULE_PARM_DESC(enable, "Enable Intel HD audio interface.");
module_param_array(model, charp, NULL, 0444);
MODULE_PARM_DESC(model, "Use the given board model.");
module_param_array(position_fix, int, NULL, 0444);
MODULE_PARM_DESC(position_fix, "Fix DMA pointer "
"(0 = auto, 1 = none, 2 = POSBUF).");
MODULE_PARM_DESC(position_fix, "DMA pointer read method."
"(0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO).");
module_param_array(bdl_pos_adj, int, NULL, 0644);
MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset.");
module_param_array(probe_mask, int, NULL, 0444);
......@@ -305,6 +305,7 @@ enum {
POS_FIX_AUTO,
POS_FIX_LPIB,
POS_FIX_POSBUF,
POS_FIX_VIACOMBO,
};
/* Defines for ATI HD Audio support in SB450 south bridge */
......@@ -433,7 +434,6 @@ struct azx {
unsigned int polling_mode :1;
unsigned int msi :1;
unsigned int irq_pending_warned :1;
unsigned int via_dmapos_patch :1; /* enable DMA-position fix for VIA */
unsigned int probing :1; /* codec probing phase */
/* for debugging */
......@@ -1309,11 +1309,8 @@ static int azx_setup_controller(struct azx *chip, struct azx_dev *azx_dev)
azx_sd_writel(azx_dev, SD_BDLPU, upper_32_bits(azx_dev->bdl.addr));
/* enable the position buffer */
if (chip->position_fix[0] == POS_FIX_POSBUF ||
chip->position_fix[0] == POS_FIX_AUTO ||
chip->position_fix[1] == POS_FIX_POSBUF ||
chip->position_fix[1] == POS_FIX_AUTO ||
chip->via_dmapos_patch) {
if (chip->position_fix[0] != POS_FIX_LPIB ||
chip->position_fix[1] != POS_FIX_LPIB) {
if (!(azx_readl(chip, DPLBASE) & ICH6_DPLBASE_ENABLE))
azx_writel(chip, DPLBASE,
(u32)chip->posbuf.addr | ICH6_DPLBASE_ENABLE);
......@@ -1852,20 +1849,21 @@ static unsigned int azx_get_position(struct azx *chip,
struct azx_dev *azx_dev)
{
unsigned int pos;
int stream = azx_dev->substream->stream;
if (chip->via_dmapos_patch)
switch (chip->position_fix[stream]) {
case POS_FIX_LPIB:
/* read LPIB */
pos = azx_sd_readl(azx_dev, SD_LPIB);
break;
case POS_FIX_VIACOMBO:
pos = azx_via_get_position(chip, azx_dev);
else {
int stream = azx_dev->substream->stream;
if (chip->position_fix[stream] == POS_FIX_POSBUF ||
chip->position_fix[stream] == POS_FIX_AUTO) {
/* use the position buffer */
pos = le32_to_cpu(*azx_dev->posbuf);
} else {
/* read LPIB */
pos = azx_sd_readl(azx_dev, SD_LPIB);
}
break;
default:
/* use the position buffer */
pos = le32_to_cpu(*azx_dev->posbuf);
}
if (pos >= azx_dev->bufsize)
pos = 0;
return pos;
......@@ -2313,6 +2311,7 @@ static int __devinit check_position_fix(struct azx *chip, int fix)
switch (fix) {
case POS_FIX_LPIB:
case POS_FIX_POSBUF:
case POS_FIX_VIACOMBO:
return fix;
}
......@@ -2320,11 +2319,9 @@ static int __devinit check_position_fix(struct azx *chip, int fix)
switch (chip->driver_type) {
case AZX_DRIVER_VIA:
case AZX_DRIVER_ATI:
chip->via_dmapos_patch = 1;
/* Use link position directly, avoid any transfer problem. */
return POS_FIX_LPIB;
return POS_FIX_VIACOMBO;
}
chip->via_dmapos_patch = 0;
q = snd_pci_quirk_lookup(chip->pci, position_fix_list);
if (q) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册