提交 4bf1226a 编写于 作者: M Mauro Carvalho Chehab

V4L/DVB (7749): cx88: fix tuner setup

Tuner setup were happening during i2c attach callback. This means that it would
happen on two conditions:

	1) if tuner module weren't load, it will happen at request_module("tuner");

	2) if tuner is not compiled as a module, or it is already loaded
	   (for example, on setups with more than one tuner), it will happen
	   when cx88 registers I2C bus.

Due to that, if tuner were loaded, tuner setup will happen _before_ reading
the proper values at tuner eeprom. Since set_addr refuses to change for a tuner
that were previously defined (except if the tuner_addr is set), this were making
eeprom tuner detection useless.

This patch removes tuner type setup from cx88-i2c, moving it to the proper
place, after taking eeprom into account.
Reviewed-by: NGert Vervoort <gert.vervoort@hccnet.nl>
Reviewed-by: NIan Pickworth <ian@pickworth.me.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 7663c1e2
......@@ -57,6 +57,9 @@ MODULE_PARM_DESC(latency,"pci latency timer");
/* ------------------------------------------------------------------ */
/* board config info */
/* If radio_type !=UNSET, radio_addr should be specified
*/
static const struct cx88_board cx88_boards[] = {
[CX88_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
......@@ -2446,25 +2449,31 @@ EXPORT_SYMBOL_GPL(cx88_setup_xc3028);
static void cx88_card_setup(struct cx88_core *core)
{
static u8 eeprom[256];
struct tuner_setup tun_setup;
unsigned int mode_mask = T_RADIO |
T_ANALOG_TV |
T_DIGITAL_TV;
memset(&tun_setup, 0, sizeof(tun_setup));
if (0 == core->i2c_rc) {
core->i2c_client.addr = 0xa0 >> 1;
tveeprom_read(&core->i2c_client,eeprom,sizeof(eeprom));
tveeprom_read(&core->i2c_client, eeprom, sizeof(eeprom));
}
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE:
case CX88_BOARD_HAUPPAUGE_ROSLYN:
if (0 == core->i2c_rc)
hauppauge_eeprom(core,eeprom+8);
hauppauge_eeprom(core, eeprom+8);
break;
case CX88_BOARD_GDI:
if (0 == core->i2c_rc)
gdi_eeprom(core,eeprom);
gdi_eeprom(core, eeprom);
break;
case CX88_BOARD_WINFAST2000XP_EXPERT:
if (0 == core->i2c_rc)
leadtek_eeprom(core,eeprom);
leadtek_eeprom(core, eeprom);
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
......@@ -2474,7 +2483,7 @@ static void cx88_card_setup(struct cx88_core *core)
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_HAUPPAUGE_HVR1300:
if (0 == core->i2c_rc)
hauppauge_eeprom(core,eeprom);
hauppauge_eeprom(core, eeprom);
break;
case CX88_BOARD_KWORLD_DVBS_100:
cx_write(MO_GP0_IO, 0x000007f8);
......@@ -2555,6 +2564,35 @@ static void cx88_card_setup(struct cx88_core *core)
cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg);
}
} /*end switch() */
/* Setup tuners */
if ((core->board.radio_type != UNSET)) {
tun_setup.mode_mask = T_RADIO;
tun_setup.type = core->board.radio_type;
tun_setup.addr = core->board.radio_addr;
tun_setup.tuner_callback = cx88_tuner_callback;
cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
mode_mask &= ~T_RADIO;
}
if (core->board.tuner_type != TUNER_ABSENT) {
tun_setup.mode_mask = mode_mask;
tun_setup.type = core->board.tuner_type;
tun_setup.addr = core->board.tuner_addr;
tun_setup.tuner_callback = cx88_tuner_callback;
cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
}
if (core->board.tda9887_conf) {
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &core->board.tda9887_conf;
cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tda9887_cfg);
}
if (core->board.tuner_type == TUNER_XC2028) {
......@@ -2572,6 +2610,7 @@ static void cx88_card_setup(struct cx88_core *core)
ctl.fname);
cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &xc2028_cfg);
}
cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
}
/* ------------------------------------------------------------------ */
......@@ -2710,7 +2749,6 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
if (TUNER_ABSENT != core->board.tuner_type)
request_module("tuner");
cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
cx88_card_setup(core);
cx88_ir_init(core, pci);
......
......@@ -104,37 +104,7 @@ static int attach_inform(struct i2c_client *client)
dprintk(1, "%s i2c attach [addr=0x%x,client=%s]\n",
client->driver->driver.name, client->addr, client->name);
if (!client->driver->command)
return 0;
if (core->board.radio_type != UNSET) {
if ((core->board.radio_addr==ADDR_UNSET)||(core->board.radio_addr==client->addr)) {
tun_setup.mode_mask = T_RADIO;
tun_setup.type = core->board.radio_type;
tun_setup.addr = core->board.radio_addr;
tun_setup.tuner_callback = cx88_tuner_callback;
client->driver->command (client, TUNER_SET_TYPE_ADDR, &tun_setup);
}
}
if (core->board.tuner_type != UNSET) {
if ((core->board.tuner_addr==ADDR_UNSET)||(core->board.tuner_addr==client->addr)) {
tun_setup.mode_mask = T_ANALOG_TV;
tun_setup.type = core->board.tuner_type;
tun_setup.addr = core->board.tuner_addr;
tun_setup.tuner_callback = cx88_tuner_callback;
client->driver->command (client,TUNER_SET_TYPE_ADDR, &tun_setup);
}
}
if (core->board.tda9887_conf) {
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &core->board.tda9887_conf;
client->driver->command(client, TUNER_SET_CONFIG, &tda9887_cfg);
}
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册