提交 4968f951 编写于 作者: A Alan Stern 提交者: Greg Kroah-Hartman

USB: EHCI: remove unused Link Power Management code

This patch (as1622) removes the USB-2.1 Link Power Management code
from the ehci-hcd driver.  This code was never integrated with
usbcore, it is full of bugs, and it was not getting used by anybody.

However, the debugging code for dumping the LPM-related fields in the
EHCI registers is left in place.  In theory it might be useful to see
these values, even though we don't use them.

This essentially amounts to a partial revert of commit
aa4d8342 (USB: EHCI: EHCI 1.1
addendum: preparation) and an almost full revert of commit
48f24970 (USB: EHCI: EHCI 1.1
addendum: Basic LPM feature support) plus its follow-ons.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 571e4121
......@@ -337,11 +337,6 @@ static int debug_async_open(struct inode *, struct file *);
static int debug_periodic_open(struct inode *, struct file *);
static int debug_registers_open(struct inode *, struct file *);
static int debug_async_open(struct inode *, struct file *);
static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos);
static ssize_t debug_lpm_write(struct file *file, const char __user *buffer,
size_t count, loff_t *ppos);
static int debug_lpm_close(struct inode *inode, struct file *file);
static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
static int debug_close(struct inode *, struct file *);
......@@ -367,14 +362,6 @@ static const struct file_operations debug_registers_fops = {
.release = debug_close,
.llseek = default_llseek,
};
static const struct file_operations debug_lpm_fops = {
.owner = THIS_MODULE,
.open = simple_open,
.read = debug_lpm_read,
.write = debug_lpm_write,
.release = debug_lpm_close,
.llseek = noop_llseek,
};
static struct dentry *ehci_debug_root;
......@@ -956,86 +943,6 @@ static int debug_registers_open(struct inode *inode, struct file *file)
return file->private_data ? 0 : -ENOMEM;
}
static int debug_lpm_close(struct inode *inode, struct file *file)
{
return 0;
}
static ssize_t debug_lpm_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
/* TODO: show lpm stats */
return 0;
}
static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
char buf[50];
size_t len;
u32 temp;
unsigned long port;
u32 __iomem *portsc ;
u32 params;
hcd = bus_to_hcd(file->private_data);
ehci = hcd_to_ehci(hcd);
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (len > 0 && buf[len - 1] == '\n')
buf[len - 1] = '\0';
if (strncmp(buf, "enable", 5) == 0) {
if (strict_strtoul(buf + 7, 10, &port))
return -EINVAL;
params = ehci_readl(ehci, &ehci->caps->hcs_params);
if (port > HCS_N_PORTS(params)) {
ehci_dbg(ehci, "ERR: LPM on bad port %lu\n", port);
return -ENODEV;
}
portsc = &ehci->regs->port_status[port-1];
temp = ehci_readl(ehci, portsc);
if (!(temp & PORT_DEV_ADDR)) {
ehci_dbg(ehci, "LPM: no device attached\n");
return -ENODEV;
}
temp |= PORT_LPM;
ehci_writel(ehci, temp, portsc);
printk(KERN_INFO "force enable LPM for port %lu\n", port);
} else if (strncmp(buf, "hird=", 5) == 0) {
unsigned long hird;
if (strict_strtoul(buf + 5, 16, &hird))
return -EINVAL;
printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird);
ehci->command = (ehci->command & ~CMD_HIRD) | (hird << 24);
ehci_writel(ehci, ehci->command, &ehci->regs->command);
} else if (strncmp(buf, "disable", 7) == 0) {
if (strict_strtoul(buf + 8, 10, &port))
return -EINVAL;
params = ehci_readl(ehci, &ehci->caps->hcs_params);
if (port > HCS_N_PORTS(params)) {
ehci_dbg(ehci, "ERR: LPM off bad port %lu\n", port);
return -ENODEV;
}
portsc = &ehci->regs->port_status[port-1];
temp = ehci_readl(ehci, portsc);
if (!(temp & PORT_DEV_ADDR)) {
ehci_dbg(ehci, "ERR: no device attached\n");
return -ENODEV;
}
temp &= ~PORT_LPM;
ehci_writel(ehci, temp, portsc);
printk(KERN_INFO "disabled LPM for port %lu\n", port);
} else
return -EOPNOTSUPP;
return count;
}
static inline void create_debug_files (struct ehci_hcd *ehci)
{
struct usb_bus *bus = &ehci_to_hcd(ehci)->self;
......@@ -1056,10 +963,6 @@ static inline void create_debug_files (struct ehci_hcd *ehci)
&debug_registers_fops))
goto file_error;
if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
&debug_lpm_fops))
goto file_error;
return;
file_error:
......
......@@ -39,7 +39,6 @@
#include <linux/dma-mapping.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <asm/byteorder.h>
#include <asm/io.h>
......@@ -108,11 +107,6 @@ static bool ignore_oc = 0;
module_param (ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
/* for link power management(LPM) feature */
static unsigned int hird;
module_param(hird, int, S_IRUGO);
MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us");
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
/*-------------------------------------------------------------------------*/
......@@ -318,7 +312,6 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
#include "ehci-timer.c"
#include "ehci-hub.c"
#include "ehci-lpm.c"
#include "ehci-mem.c"
#include "ehci-q.c"
#include "ehci-sched.c"
......@@ -580,17 +573,6 @@ static int ehci_init(struct usb_hcd *hcd)
temp &= ~(3 << 2);
temp |= (EHCI_TUNE_FLS << 2);
}
if (HCC_LPM(hcc_params)) {
/* support link power management EHCI 1.1 addendum */
ehci_dbg(ehci, "support lpm\n");
ehci->has_lpm = 1;
if (hird > 0xf) {
ehci_dbg(ehci, "hird %d invalid, use default 0",
hird);
hird = 0;
}
temp |= hird << 24;
}
ehci->command = temp;
/* Accept arbitrarily long scatter-gather lists */
......
......@@ -777,11 +777,6 @@ static int ehci_hub_control (
status_reg);
break;
case USB_PORT_FEAT_C_CONNECTION:
if (ehci->has_lpm) {
/* clear PORTSC bits on disconnect */
temp &= ~PORT_LPM;
temp &= ~PORT_DEV_ADDR;
}
ehci_writel(ehci, temp | PORT_CSC, status_reg);
break;
case USB_PORT_FEAT_C_OVER_CURRENT:
......
/* ehci-lpm.c EHCI HCD LPM support code
* Copyright (c) 2008 - 2010, Intel Corporation.
* Author: Jacob Pan <jacob.jun.pan@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* this file is part of ehci-hcd.c */
static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num)
{
u32 __iomem portsc;
ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num);
if (port_num > HCS_N_PORTS(ehci->hcs_params)) {
ehci_dbg(ehci, "invalid port number %d\n", port_num);
return -ENODEV;
}
portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]);
portsc &= ~PORT_DEV_ADDR;
portsc |= dev_addr<<25;
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]);
return 0;
}
/*
* this function is used to check if the device support LPM
* if yes, mark the PORTSC register with PORT_LPM bit
*/
static int ehci_lpm_check(struct ehci_hcd *ehci, int port)
{
u32 __iomem *portsc ;
u32 val32;
int retval;
portsc = &ehci->regs->port_status[port-1];
val32 = ehci_readl(ehci, portsc);
if (!(val32 & PORT_DEV_ADDR)) {
ehci_dbg(ehci, "LPM: no device attached\n");
return -ENODEV;
}
val32 |= PORT_LPM;
ehci_writel(ehci, val32, portsc);
msleep(5);
val32 |= PORT_SUSPEND;
ehci_dbg(ehci, "Sending LPM 0x%08x to port %d\n", val32, port);
ehci_writel(ehci, val32, portsc);
/* wait for ACK */
msleep(10);
retval = handshake(ehci, &ehci->regs->port_status[port-1], PORT_SSTS,
PORTSC_SUSPEND_STS_ACK, 125);
dbg_port(ehci, "LPM", port, val32);
if (retval != -ETIMEDOUT) {
ehci_dbg(ehci, "LPM: device ACK for LPM\n");
val32 |= PORT_LPM;
/*
* now device should be in L1 sleep, let's wake up the device
* so that we can complete enumeration.
*/
ehci_writel(ehci, val32, portsc);
msleep(10);
val32 |= PORT_RESUME;
ehci_writel(ehci, val32, portsc);
} else {
ehci_dbg(ehci, "LPM: device does not ACK, disable LPM %d\n",
retval);
val32 &= ~PORT_LPM;
retval = -ETIMEDOUT;
ehci_writel(ehci, val32, portsc);
}
return retval;
}
static int __maybe_unused ehci_update_device(struct usb_hcd *hcd,
struct usb_device *udev)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int rc = 0;
if (!udev->parent) /* udev is root hub itself, impossible */
rc = -1;
/* we only support lpm device connected to root hub yet */
if (ehci->has_lpm && !udev->parent->parent) {
rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
if (!rc)
rc = ehci_lpm_check(ehci, udev->portnum);
}
return rc;
}
......@@ -202,11 +202,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
case PCI_VENDOR_ID_INTEL:
ehci->need_io_watchdog = 0;
if (pdev->device == 0x0806 || pdev->device == 0x0811
|| pdev->device == 0x0829) {
ehci_info(ehci, "disable lpm for langwell/penwell\n");
ehci->has_lpm = 0;
}
break;
case PCI_VENDOR_ID_NVIDIA:
switch (pdev->device) {
......@@ -216,8 +211,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
* devices with PPCD enabled.
*/
case 0x0d9d:
ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
ehci->has_lpm = 0;
ehci_info(ehci, "disable ppcd for nvidia mcp89\n");
ehci->has_ppcd = 0;
ehci->command &= ~CMD_PPCEE;
break;
......@@ -425,11 +419,6 @@ static const struct hc_driver ehci_pci_hc_driver = {
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
/*
* call back when device connected and addressed
*/
.update_device = ehci_update_device,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
......
......@@ -61,11 +61,6 @@ static const struct hc_driver vt8500_ehci_hc_driver = {
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
/*
* call back when device connected and addressed
*/
.update_device = ehci_update_device,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
......
......@@ -206,7 +206,6 @@ struct ehci_hcd { /* one per controller */
#define OHCI_HCCTRL_LEN 0x4
__hc32 *ohci_hcctrl_reg;
unsigned has_hostpc:1;
unsigned has_lpm:1; /* support link power management */
unsigned has_ppcd:1; /* support per-port change bits */
u8 sbrn; /* packed release number */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册